Programming :: .ogv Video Does Not Display With <video> Tag In Firefox 3.5?
Jul 3, 2009
I was trying to take advantage of that new HTML5 <video> tag, and Firefox 3.5's native Ogg support, by embedding an .ogv video. Here is the references I used:
[code].....
Here was the code I put on my web page:
Code:
<video width="640" height="480" controls="controls">
<source src="http://path/to/uploaded/video/on/my/site.ogv" />
Your browser does not support the <code>video</code> element.
</video>
However, when I view it I get a video box, but it is grey and will not play a video. I keep playing with the various attributes but the result always seems to be the same. I also tried it on a Windows box with Firefox 3.5 (to make sure it didn't have something to do with my Linux config) but the results were the same.
View 4 Replies
ADVERTISEMENT
Mar 23, 2010
can we able to display video on gtk window, can we able to control that video using buttons on window. Any code snippets or some good links. Video images is of format RGB24. Can I use gstreamer also.
View 1 Replies
View Related
Jan 17, 2010
how to get the display to the TV so I can watch movies. I have a Compaq Presario V5000 laptop, AMD Sempron processor, and an ATI Radeon Xpress 200M card. I have been using this successfully on Windows XP, but would prefer to get my feet wet more with Ubuntu.
View 2 Replies
View Related
Nov 16, 2010
I was able to install the newest version of Ubuntu on my laptop with ease, but my not on my home desktop. I installed it inside Windows, and my screen quickly goes to black when I turn the computer on. (This only happens when I boot Ubuntu)
View 9 Replies
View Related
Mar 14, 2010
I just installed Debian stable on my desktop computer and when I start it up I get a blank screen that says cannot display video in this mode.
View 9 Replies
View Related
Dec 1, 2010
My computer boots up but just as its about to load debian I lose video output. Where do I start with troubleshooting this?
Also there was an option to install debain as "graphical installation" or just "installation". I chose just "installation", whats the difference? I dont know if that has anything to do with why i cant get output.
View 8 Replies
View Related
Sep 29, 2010
I've been dual booting Lenny and Squeeze but after replacing Lenny with a fresh Squeeze using ext4, the video display has been strange. The effect is similar to running a live CD, where a click does nothing for a few seconds while the CD winds up and gets to the application, but slower than that. Sometimes the display has patches of several windows all mixed up, zig zag patterns like a TV that is too far from a transmitter to receive a good signal and sometimes the mouse freezes in moving around. When I boot and don't start X, everything works perfectly, no delays, no messed up windows.
My video is ATI x1300 with Radeon driver. What is the best way to get the system to use only vesa, to see if that works, instead of ati or radeon? is possible to use grub.cfg or /etc/defaults/grub or /etc/grub.d/ ? I couldn't find any reports of problems with Xorg used by Squeeze, so it seems to be the ATi driver or the radeon driver.
View 3 Replies
View Related
Jul 3, 2010
I was wondering how to enable an S-Video display connection to my TV. I'm on a Compaq Presario C700 using F13. I connected it to my laptop and TV, and it displayed the laptop screen through startup, but went away when the login screen appeared, and didn't display after I logged in.
View 5 Replies
View Related
Mar 5, 2010
i'v found a way to do it with screen save but not with normal video files like avi mpg and etc.
View 6 Replies
View Related
May 17, 2010
I just installed 10.04 Lucid Lynx and have a serious graphics problem. I've attached a picture to show the problem.
Some Background:
Pentium 4 3.06GHz
1.5GB RAM
ATI Radeon 9600
I installed via liveUSB but had to choose the "nomodeset" option by pressing F6. Otherwise after the Ubuntu boot screen the graphics went like that in the attached image. The installation went fine (took less than 15 minutes!) but after the reboot the graphics problem returned. I can't see anything and the system is useless this way. I can't post up any logs (I'm typing this from the liveUSB).
View 5 Replies
View Related
May 26, 2010
kubuntu 10.04.
1. in the user I used for system installation, my monitor works fine
2. in the user I created later - same rights - monitor is set for 60Hz. This is the only option in System Settings/Display
3. there's only xorg.conf.failsafe in /etc/X11, which seems to what the second user is using
Where is the display/video card set up in Kubuntu 10.04? Why are different users use different settings? Can I copy from one to the other?
View 2 Replies
View Related
Mar 11, 2011
I've just watched a video (on the Australian ABC web site: [URL] with the video at [URL] from inside Firefox (3.0.15), and now my Linux (8.0.4) display is mangled.The entire display is moved left and up about 2 inches on a (I think) 15 inch screen. In the vertical direction it is "wrapped" so I can still see my toolbar. It is not wrapped in the horizontal direction, so there is a black bar down the right hand side of my screen. It is as if the wrong screen size is saved.
This isn't just in my desktop environment - it goes wrong as soon as I boot into Ubuntu Linux. But my monitor itself is OK - the display is correct in GRUB and Windows.Since the problem does not go away on reboot (or power down), I assume some file has been corrupted. Where would that file be and how would I fix it?
View 3 Replies
View Related
May 8, 2011
I am running a dual boot system. I have XP on one HD and Ubuntu 10.04 on the other. No problems. I boot back and forth all the time. Then came along Natty. Now I tried to boot over, and I get "Cannot display this video mode". I have it set up that when I restart, if im away from the computer, Ubuntu starts by default. So it eventually starts in ubuntu. But the screen where I used to be able to choose which operating system to boot into is now replaced with "Cannot display this video mode".
I am not wireless, and nothing has changed as far as hard wear. The monitor is some old Dell that worked perfectly fine with 10.04. I tried changing my resolution and settings to every different one, and restart, and still no dice.
To sum it up, after my update to Natty, when I reboot, my OS selection screen is no longer visible. Its now replaced by "Cannot display this video mode".
So now it seems, what ever setting this screen is running on, XP dont like it..... because of Natty?
I gotta get some work done in XP, so right now im screwed. My CRT is currently sitting outside in the rain. Or I would try it.
View 9 Replies
View Related
May 26, 2011
After upgrade my Ubuntu to 11.04 i have a weird problem about videos and i took a capture from my display(HERE) I'm getting the same thing with all of the players and video file types. Ubuntu 11.04 64bit ATI Mobility Radeon HD 4650
View 1 Replies
View Related
Aug 3, 2011
I used Ubuntu for about a year bakc in 2008ish, and then went back to windows due to having to run certain software for university. I have since graduated, and have now been running Ubuntu 10.04 for about 6 months. So far everything has been working fine, this is my first real problem!Yesterday, I ran the update manager and installed all the updates it recommended. Since then, any time I try to view a webpage with flash (eg .....) I get the plugin crashed display where the video should be. If I restart the computer, flash will work for an hour or so and then crash again. It's not just the one site, all sites seem to have the same message.
View 1 Replies
View Related
Mar 6, 2011
Just loaded Linux mint 9 but having problems with video display. When I open Mozilla it works ok for awhile but then goes crazy and i can't see anything.
View 1 Replies
View Related
Feb 24, 2010
I have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
View 1 Replies
View Related
Jun 19, 2010
I just installed lucid on my laptop with a second screen. Unfortunately, I cannot display any video. Neither on the laptop screen nor on the second external screen. In contrast, rebooting without attaching the external screen allows me to display videos again.
I never experienced this kind of behavior with Ubuntu 9.10.
Graphic card: Intel 945
Let me know if you need further information.
View 2 Replies
View Related
Oct 31, 2010
i have upgraded from 10.04 and now Impress wont display most videos when in SLIDE SHOW mode (most important). These videos do play however when viewed in editing mode. impress is thus unusable if you have videos. i tinkered with it all i could, i even reinstalled 10.10 from usb stick no progress.
View 1 Replies
View Related
Dec 20, 2010
I've had this problem for ages and decided to try to tackle it. It occasionally also occurs on my laptop but only intermittently. The video on the second screen seems to go haywire. On boot, it doesn't display the background image. It only will display a fading black and gray picture. Then anything that is put on the screen is captured like a screen shot on the background. It is just hard to know if things were closed
View 1 Replies
View Related
May 16, 2011
First, my set-up -Intel i5 quad-core CPU 16GB RAM.Two Radeon HD5450 video cards, each with two monitors.Multi-boot - Windows7, Ubuntu 10.04.2 and Ububtu 10.04.2(not a typo, the second instance is for experiments)Both the 10.04's have the proprietary ATI video drivers.
On the first set-up, everything works beautifully.All four monitors are alive, and configured with Xinerama as a single large desktop.In the second Ubuntu 10.04 set-up, I have two problems -The second video card is not recognized -it shows up as an unrecognized card.Of the two monitors connected to it, only one is detected, with a resolution of 640x480, not the 1920x1080 the first set-up sees.When I try and switch to the virtual terminal - ctl-alt-F1, I get a blank screen.The terminal is alive and well - I can log in, and enter commands which are executed. For example, when I enter 'ls -l > dir.txt', I see a 'dir.txt' file in my home folder; nothing shows on the screen.how I got the first set up to work!I have tried copying the xorg.conf from the first (working) set-up to the second, but still no joy.The Grub GFXMODE and GFXPAYLOAD are common to both the set-ups, so that can't be the difference.
View 5 Replies
View Related
Jun 4, 2011
My problem is on bootup and shut down I get: analog input cannot display this video mode. I've got a dell monitor nvidia graphics card. Don't really know how to provide much more info than that. From what I've searched on the net is that it probably has to do with the refresh rate.
View 4 Replies
View Related
Jan 29, 2010
This is just an idea, and I want to know if it can be done. Could I set up Nautilus so that videos and songs have their durations shown in the filename? For example, let's say I have a video of me shooting targets. There would be an icon, and the filename underneath would say: "Range trip 2009.flv - 8:23"
Is there currently a way to do this?
View 1 Replies
View Related
May 10, 2010
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies
View Related
May 29, 2011
I use natty 64 bit. I installed a HD 4870. Installed the drivers according to instruction on [URL]. I ran aticonfig --initial. Still I get "Cannot Display This video Mode" after the grub screen, during boot up. Monitor preferences applet doesn't seem to work, either - it won't detect the monitor parameters EDID thing.
When I try to open the Catalyst Control Centre I get:
p, li { white-space: pre-wrap; } "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
No ATI graphics driver is installed, or the ATI driver is not functioning properly.
Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig."
Here are chunks of xorg log (I cut the non video bits).
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[210.874] (II) LoadModule: "extmod"
[210.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[210.875] (II) Module extmod: vendor="X.Org Foundation"
[210.875] compiled for 1.10.1, module version = 1.0.0
[210.875] Module class: X.Org Server Extension
[210.875] ABI class: X.Org Server Extension, version 5.0 .....
View 1 Replies
View Related
Jan 29, 2010
I have RHEL 5.3 running on Cray CX1. I am trying to connect to HP LP3065 30" monitor and not getting any video display (no response at all). Monitor is working fine on Windows system. Monitor has only DVI-D ports and my Cray system also has DVI socket to connect with. I checked for drivers at HP site and I couldn't find one anywhere else. I have NVIDIA quadro FX4800 video card and NVIDIA driver installed.
View 8 Replies
View Related
Mar 12, 2009
HP TouchSmart IQ500t
NVIDIA GEForce 9300M GS HD
Intel Core 2 Duo Processor T6400
Linux REL 4 64 bit OS
Tried installing latest NVIDIA driver (NVIDIA-Linux-x86_64-180.29-pkg2) from NVIDIA website for this video card, and the display was not appearing correctly. There was a lot of garbage at the top of the monitor. Half of the desktop screen was missing.
View 1 Replies
View Related
Apr 2, 2010
Since reinstalling Ubu9.04 from disk, I'm unable to view many MP4 videos.
My laptop only has 3 settings for res.
Here's some lshw:
And some attempt at adding a higher value in xorg.conf:
View 14 Replies
View Related
Jan 11, 2011
I'm testing HTML5 for the first time, using Firefox (beta) 4.0b8 and SeaMonkey (beta) 2.1b1, and its ignoring some CSS. Specifically, I have problems with the <details> tag. (It is nested in a paragraph...I am using it to provide an in-paragraph definition in hopes it can be toggled.)
Firefox only partly supports <details>. It's not supposed to show anything except the content of <summary>, unless you click on <summary>'s content. Instead, it puts a line break before the content of <details>, splitting the paragraph in two peices (which looks silly), without the "closed/open" functionality.
So I tried using "display:inline" in my CSS, but that gets ignored. Just for fun, I also tried "display:hidden" (also ignored) and "display:none" (obeyed).
SeaMonkey doesn't doesn't do anything special with the content of <display>...but it also ignores the same CSS as Firefox.
The only thing I can do to support semantic design is apply "font-style:italic" to all <details> elements.
Granted, you might ask, "why bother using <details> at all. then?" Well, I would like to have <details> for the browsers that support it, with the "font-style:italic" to degrade the page nicely for those that don't (such as for SeaMonkey).
Does anyone know why "display:inline" and "display:hidden" get ignored?
View 1 Replies
View Related
Feb 22, 2010
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies
View Related
