I've managed to set up a ftp server with gadmin-proftpd, i need to access the "Downloads" folder from the "Home Folder" but it won't allow me, I've set up the login fine, I just can't get it to show the directory.
Status: Connecting to
Status: Connection established, waiting for welcome message...
Response: 220 My FTP Server
Command: USER rLLZORS
[Code]....
I am unable to create a directory as an anonymous user using FTP. Settings are as below mentioned:-
vsftpd.conf
anonymous_enable=YES
write_enable=YES
anon_upload_enable=YES
[Code].....
I am attempting to configure vsftpd to allow anonymous users to PUT files into a shared incoming directory. This would be like a dropbox for my customers. Ideally, the incoming directory's contents would not be viewable by the users.
I believe that refused connection is due to the PAM configuration for vsftpd.
May 4 08:03:16 WSVM-S1-1 sshd[1512]: Invalid user anonymous from xxx.xxx.xxx.xxx
May 4 08:03:16 WSVM-S1-1 sshd[1513]: input_userauth_request: invalid user anonymous
May 4 08:03:16 WSVM-S1-1 sshd[1512]: pam_unix(sshd:auth): check pass; user unknown
[Code].....
Code:RW-00022: Error: - Unable to create file with proper privileges: JAVA_TOP Mount Point = /media/SAMSUNG/d01/oracle/vis/apps/apps_st/comn/java/classes test using command: su applmgr -c "touch /media/SAMSUNG/d01/oracle/vis/apps/tech_st/10.1.3/appsutil/jdk/test.tst"
touch: cannot touch `/media/SAMSUNG/d01/oracle/vis/apps/tech_st/10.1.3/appsutil/jdk/test.tst': Permission denied
I am trying to install Oracle ebs on my machine and I keep getting the above error.
I can't make write changes to .php files in my Wordpress editor, although I have already chmod -R 777 the directory. here is what ls -al says:
Code:
[root@localhost ~]# ls -al /usr/share/wordpress/wp-content/themes/purple-swirl/
total 12
drwxrwxrwx. 3 root root 4096 May 21 17:10 .
drwxrwxrwx. 4 root root 4096 May 21 17:10 ..
[code]....
I have configured vsftpd on Ubuntu 9.04 and it is working fine. I have configured non-anonymous ftp so that only few of us can acces that ftp. Now I want to secure it using ssl. so I have changed the vsftpd.conf file and entered the following lines in it.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
ssl_enable=YES
force_local_logins_ssl=YES
force_local_data_ssl=YES
After the restarting the service now when I try to connect to the ftp server it gives me this error. 530 Non-anonymous sessions must use encryption.
In my house I have a small computer running ubuntu karmic that works as a server/media center.
I would like to have a folder (my ~/public folder) openly available to the entire world via anonymous ftp.
I have read somewhere that the defauld vsftpd config is basically this: no local user login, anon only and sharing a folder called /home/ftp, but I can't get this to work.
Here is my /etc/vsftpd.conf file:
Code:
Hope you can help me out. I'm trying to setup a "drop-box" on ubuntu 9.10 server with vsftpd. I'm able to login and land in the /home/user directory, however I cannot write anything.
View 5 Replies View Relatedhow to add files (and where) for anonymous download. I installed vsftpd and configure /etc/vsftpd.conf file...just few common options like allowing anonymous,download,upload. And now i can login with anonymous. But i dont know what to do next, i want to try to download and upload files.
View 9 Replies View RelatedI set up an FTP server with two separate directories. One of them is mine, and the other one is shared (for anonymous ftp). The layout is like this.
/home/hallvor <---- this is my ftp directory where I keep my private files. I am the only user.
/home/ftp <---- this is the shared ftp directory with anonymous login.
Whenever I transfer files from my ftp directory to the public /home/ftp, I would like to: prevent anonymous users from deleting files in /home/ftp or uploading their own files to that directory (read only) What permissions must I set? I think this is all a bit confusing. I tried to chmod /home/ftp to 644 and change ownership to root, but that made it impossible to even log on anonymously.
Running Debian 5. I have a small server that needs to provide anonymous ftp service (download only) to the folks in my dept (we have a firewall that will keep outsiders out, so I'm not worried about outside folks getting to the files). The question is: which anonymous ftp server should I install? Something that can be installed via "apt-get install xyzzy", where I can edit the /etc/xyzzy.conf file to point to the /home/ftp directory, and start/stop it with /etc/init.d/xyzzy start|stop|restart command.
View 3 Replies View Relatedvsftpd is working fine in my network with anonymous user but i need to access that from out-side all the setting is done on the router. I am getting page to access ftp form out-side but only for ftp users not anonymous user how i will give permeation to access ftp to anonymous user ?
View 26 Replies View RelatedDoes RHEL install using FTP support username/password without the GUI? I need to secure my RHEL network FTP hosted from Windows 2k3r2 Weird problem happened... maybe my code is wrong in default.cfg:
ks=ftp://usernameCOLONpassword@192.168.0.1:50/rhel32/ks.cfg (more below)
Symptoms:
1) Kickstart found with anonymous ftp using ks=ftp://192.168.0.1:50/rhel32/ks.cfg (with IIS anonymous on)
2) GUI mode works when I select non-anonymous and enter a windows username/password
3) how do i do it using default.cfg instead for the GUI???
OS: RHEL5u4 Client CD over network install using IIS FTP PXELinux: Latest verrsion
[Code]...
I'm trying to use Nautilus's connect to server to connect to an ftp server, but I'm having a problem. The username on the ftp server is "anonymous", but it requires a password. When Nautilus sees "anonymous" as the username it assumes it's dealing with a public ftp server and doesn't prompt for a password, and then, of course, I fail to connect.
I've tried modifying the .gtk-bookmarks file to account for this, but this leads to another problem. The password opens with a / and for whatever reason, this leads to Nautilus popping up an error: "Could not connect to ftp://anonymous:0/[rest of password]@[server]". It's adding a "0" to the beginning of my password for some reason. Is there any way to fix this without changing the password?
Does anyone know how to make an anonymous email service like Dodgeit,com? Basically where users can go thru a web login to check any mailbox name they want at yourdomain.com.
I know you can do it thru Postfix, what other setup is needed? Any easy way of going about this?
I have a text based game installed on a Linux server, and I would like to allow logins on that server via SSH, but with restrictions.The login should go directly to the game which reads keyboard input from stdin. If the game quits the user should be immediately disconnected from the server. Alternately, if the user logs in there should only be one command available to the user, the game.I have thought about using a web based interface to the game, but there is something about playing the game in a terminal that just feels right.Please don't reply with "this is a bad idea..." or its variants because that is an easy out. I just want to know if anyone knows of a solution.
View 2 Replies View Relatedobviously it's at least difficult but I'm interested in knowing if it's theoretically possible to allow anonymous users of vsftpd to upload to the same directory that anon_root is set to. If it's not then it's no big deal, I'm just trying to get a sense of the range of possibilities.
View 1 Replies View Relatedi'm using ftp server with RHEL-5.1 now i wish to an anonymous user can create and upload some file on my ftp server... for this i configure the entries in /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
# Uncomment this to allow local users to log in.
local_enable=YES
[code]....
Fresh Slack 13.0 64bit with default proftpd installation allows to log-in the anononymous user only. All the shell users (having valid shell in /etc/passwd) are rejected.
View 14 Replies View Relatedim using default setting for proftpd and having two major problem for me at least
1. how to disable anonymous login?
2. how to make proftpd login using my default box login?
I am trying to configure a ftp server (pure-ftp) where I am using CentOS 5.5.
View 1 Replies View RelatedI just want to configure Vsftpd to allow users to have total access to the FTP server. The server and users are all on a private LAN behind a router with no access from the Net, so I don't need any security. The following basic configuration doesn't allow uploading files after I log on as anonymous/whatever:
/etc/vsftpd/vsftpd.conf
Code:
listen=YES
anonymous_enable=YES
local_enable=YES
write_enable=YES
xferlog_file=YES
#anonymous users are restricted (chrooted) to anon_root
#anon_root=/home/ftp/incoming
anon_root=/var/ftp
anon_upload_enable=YES
anon_mkdir_write_enable=YES
#chroot_local_user=NO
#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list
Here's what happens when I log on as anonymous/whatever and try to upload a file:
> ftp server
Connected to server.
220 (vsFTPd 2.0.5)
Name (server:root): anonymous
331 Please specify the password.
Password:<whatever>
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls -al
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 .
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 ..
drwxr-xr-x 2 0 0 4096 May 25 2010 pub
226 Directory send OK.
ftp> put /var/tmp/ftp
local: /var/tmp/ftp remote: /var/tmp/ftp
200 PORT command successful. Consider using PASV.
553 Could not create file.
In /etc/xinetd you see a file by the name of gssftp
Is vsftpd replaced by gssftpd
I want to configure gssftp to allow anonymous logins can anybody tell me where is the conf file for gssftp
This is on Centos 5.3 by the way..... I had a DVD and, well, just wanted to test some things.. I'm aware that this is not the latest release.
And, by the way (I just read an earlier post) I've added the username and password with which I'm trying to login (..hello?).
I'm at work and I don't have a copy of my Vsftpd configuration file (don't wanna edit this whole thing - actually there is a copy, below). I've used Slackware for years and never had any issues with Vsftpd - it just works. I am trying Centos because I need help with upgrading my mail server (qmail) and there's not much help for Slackware users. Also, I used to run RHEL3 and had vsftpd working fine (had to copy some file to /etc/pam.d) but it worked famously. I compiled all my web server stuff (just don't like these default things where I have no idea how things are integrated) and I'm hung up on - of all things - vsftpd.
Anyway....When I try to log into my ftp server I get "KERBEROS_V4 rejected as an authentication type" and only the anonymous account works. Any other logins produce an error (incorrect login - see ya' later). I have SE Linux and the firewall OFF. I don't recall the directive, precisely, but my vsftpd.conf file is set allow local users to connect. I installed with yum and it added some lines at the bottom (one was about a user list and the other was about PAM). I've got a chroot list and a user list although it's not clear to me precisely where the user list should be placed. I actually uninstalled the RPM and compiled, too. I've done everything but call an exorcist. And I've found tons of posts regarding this on the net and none of the fixes worked. Man - on slackware you type "make" and "make install" (I build it with tcp_wrappers) and you're off to the races.
Actually - I did upload the vsftpd.conf file to work (where I'm at, now). Minus lines that were commented out it looks like this:
Could it, possibly, be something about how I am adding the user, the shell type, etc? I know that in Redhat I used to type "/usr/sbin/useradd -d /home/someuser joe". I've done it that way and I've also done it like so: "useradd -d /home/schmoe -s /bin/bash schmoe".
I have a test server (2.6.18-194.el5) that allows automated tools from Windows 7/Windows Server 2008 to access the filesystem (anonymous NFS access) via Samba (3.5.4-0.70.el5_6.1). Documentation on the smbusers file on samba.org seems a little thin.
* why is it necessary map unix users to samba users?
* what purpose does this mapping serve?
* does the umask of the unix user limit the samba user it is mapped to when creating files/directories? what about anonomous access?
* why are files created via anonymous access owned by 'nobody'?
* how can I control what user and permissions files/directories are created with?
I just opened an (unmanaged) VPS account and and have been encountering nothing but problems with trying to get Apache up and running (its something I've done many times before).Basically the inital error was with LDAP not having enough space, so I disabled the related extensions and Apache still would not run. Looking at the log, it contains: (28)No space left on device: Unable to create scoreboard (anonymous shared memory failure)
View 1 Replies View RelatedI'm trying adjust my proftpd server's settings, that anonymous users could download what they need smoothly.
A small problem made me so bemused:
In the configuration file of proftpd, I place the following setting section in the <anonymous> section,
Code:
After restarting the proftpd server and applying the configuration, I try downloading a file in IE browser. Sometimes, it prompts a saveas dialog, and everything was okay.
However, it occasionally prompts a login form instead of a SaveAs dialog. This makes our customers confused greatly.
So, how could I prevent browser from prompting login form when anonymous users try to download files from our ftp server?
Quote:
OS: CentOS 5.3
Server: ProFTPd 1.3.1
I've recently installed Proftpd to host for someone for a couple of hours.
With the default config it works however when taken the comments out and edited for anonymous, proftpd fails to start
This is the default config file which works if you have a user and password for my machine, but anonymous wont work (when the comments were removed).
I'm trying to get vsftpd running with both anonymous and local user access to the same folder. The directory I'm using is /tftp with the following permissions:
dr-srwxrwx 7 root root 12288 2009-08-14 15:54 tftp
My vsftpd.conf is this:
anonymous_enable=YES
local_enable=YES
write_enable=YES
[code]....
I set the default "ftp" user's home directory to /tftp (was /var/ftp).
I configured a server with vsftpd, and what I want to do is force local users to use SSL (which I have done), and allow anonymous users on the "ftp" username to access the server with only a password and no SSL. Here is my configuration file:
Code:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
[Code]....
