CentOS 5 Server :: VSFTPD - Unable To Authenticate As Anonymous User
May 4, 2010
I am attempting to configure vsftpd to allow anonymous users to PUT files into a shared incoming directory. This would be like a dropbox for my customers. Ideally, the incoming directory's contents would not be viewable by the users.
I believe that refused connection is due to the PAM configuration for vsftpd.
May 4 08:03:16 WSVM-S1-1 sshd[1512]: Invalid user anonymous from xxx.xxx.xxx.xxx
May 4 08:03:16 WSVM-S1-1 sshd[1513]: input_userauth_request: invalid user anonymous
May 4 08:03:16 WSVM-S1-1 sshd[1512]: pam_unix(sshd:auth): check pass; user unknown
[Code].....
View 3 Replies
ADVERTISEMENT
Oct 14, 2010
I am unable to create a directory as an anonymous user using FTP. Settings are as below mentioned:-
vsftpd.conf
anonymous_enable=YES
write_enable=YES
anon_upload_enable=YES
[Code].....
View 3 Replies
View Related
Aug 14, 2009
I'm trying to get vsftpd running with both anonymous and local user access to the same folder. The directory I'm using is /tftp with the following permissions:
dr-srwxrwx 7 root root 12288 2009-08-14 15:54 tftp
My vsftpd.conf is this:
anonymous_enable=YES
local_enable=YES
write_enable=YES
[code]....
I set the default "ftp" user's home directory to /tftp (was /var/ftp).
View 4 Replies
View Related
Jun 5, 2010
This is on Centos 5.3 by the way..... I had a DVD and, well, just wanted to test some things.. I'm aware that this is not the latest release.
And, by the way (I just read an earlier post) I've added the username and password with which I'm trying to login (..hello?).
I'm at work and I don't have a copy of my Vsftpd configuration file (don't wanna edit this whole thing - actually there is a copy, below). I've used Slackware for years and never had any issues with Vsftpd - it just works. I am trying Centos because I need help with upgrading my mail server (qmail) and there's not much help for Slackware users. Also, I used to run RHEL3 and had vsftpd working fine (had to copy some file to /etc/pam.d) but it worked famously. I compiled all my web server stuff (just don't like these default things where I have no idea how things are integrated) and I'm hung up on - of all things - vsftpd.
Anyway....When I try to log into my ftp server I get "KERBEROS_V4 rejected as an authentication type" and only the anonymous account works. Any other logins produce an error (incorrect login - see ya' later). I have SE Linux and the firewall OFF. I don't recall the directive, precisely, but my vsftpd.conf file is set allow local users to connect. I installed with yum and it added some lines at the bottom (one was about a user list and the other was about PAM). I've got a chroot list and a user list although it's not clear to me precisely where the user list should be placed. I actually uninstalled the RPM and compiled, too. I've done everything but call an exorcist. And I've found tons of posts regarding this on the net and none of the fixes worked. Man - on slackware you type "make" and "make install" (I build it with tcp_wrappers) and you're off to the races.
Actually - I did upload the vsftpd.conf file to work (where I'm at, now). Minus lines that were commented out it looks like this:
Could it, possibly, be something about how I am adding the user, the shell type, etc? I know that in Redhat I used to type "/usr/sbin/useradd -d /home/someuser joe". I've done it that way and I've also done it like so: "useradd -d /home/schmoe -s /bin/bash schmoe".
View 2 Replies
View Related
Sep 4, 2010
vsftpd is working fine in my network with anonymous user but i need to access that from out-side all the setting is done on the router. I am getting page to access ftp form out-side but only for ftp users not anonymous user how i will give permeation to access ftp to anonymous user ?
View 26 Replies
View Related
Feb 5, 2010
I have installed vsftpd by "yum -y install vsftpd",disabled anonymous login and set .When I use a linux client's file browser to login using a user account "ftpacc" by ftp://ip_address, its location is "/" instead of /home/ftpacc".When I use a window client to login, its location is "/home/ftpacc"
View 1 Replies
View Related
Jan 27, 2010
i'm using ftp server with RHEL-5.1 now i wish to an anonymous user can create and upload some file on my ftp server... for this i configure the entries in /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
# Uncomment this to allow local users to log in.
local_enable=YES
[code]....
View 3 Replies
View Related
May 19, 2010
In my house I have a small computer running ubuntu karmic that works as a server/media center.
I would like to have a folder (my ~/public folder) openly available to the entire world via anonymous ftp.
I have read somewhere that the defauld vsftpd config is basically this: no local user login, anon only and sharing a folder called /home/ftp, but I can't get this to work.
Here is my /etc/vsftpd.conf file:
Code:
View 9 Replies
View Related
Mar 24, 2011
obviously it's at least difficult but I'm interested in knowing if it's theoretically possible to allow anonymous users of vsftpd to upload to the same directory that anon_root is set to. If it's not then it's no big deal, I'm just trying to get a sense of the range of possibilities.
View 1 Replies
View Related
Feb 2, 2010
Hope you can help me out. I'm trying to setup a "drop-box" on ubuntu 9.10 server with vsftpd. I'm able to login and land in the /home/user directory, however I cannot write anything.
View 5 Replies
View Related
Jan 17, 2011
how to add files (and where) for anonymous download. I installed vsftpd and configure /etc/vsftpd.conf file...just few common options like allowing anonymous,download,upload. And now i can login with anonymous. But i dont know what to do next, i want to try to download and upload files.
View 9 Replies
View Related
Mar 13, 2011
I just want to configure Vsftpd to allow users to have total access to the FTP server. The server and users are all on a private LAN behind a router with no access from the Net, so I don't need any security. The following basic configuration doesn't allow uploading files after I log on as anonymous/whatever:
/etc/vsftpd/vsftpd.conf
Code:
listen=YES
anonymous_enable=YES
local_enable=YES
write_enable=YES
xferlog_file=YES
#anonymous users are restricted (chrooted) to anon_root
#anon_root=/home/ftp/incoming
anon_root=/var/ftp
anon_upload_enable=YES
anon_mkdir_write_enable=YES
#chroot_local_user=NO
#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list
Here's what happens when I log on as anonymous/whatever and try to upload a file:
> ftp server
Connected to server.
220 (vsFTPd 2.0.5)
Name (server:root): anonymous
331 Please specify the password.
Password:<whatever>
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls -al
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 .
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 ..
drwxr-xr-x 2 0 0 4096 May 25 2010 pub
226 Directory send OK.
ftp> put /var/tmp/ftp
local: /var/tmp/ftp remote: /var/tmp/ftp
200 PORT command successful. Consider using PASV.
553 Could not create file.
View 4 Replies
View Related
Jan 20, 2010
I'm trying to use Nautilus's connect to server to connect to an ftp server, but I'm having a problem. The username on the ftp server is "anonymous", but it requires a password. When Nautilus sees "anonymous" as the username it assumes it's dealing with a public ftp server and doesn't prompt for a password, and then, of course, I fail to connect.
I've tried modifying the .gtk-bookmarks file to account for this, but this leads to another problem. The password opens with a / and for whatever reason, this leads to Nautilus popping up an error: "Could not connect to ftp://anonymous:0/[rest of password]@[server]". It's adding a "0" to the beginning of my password for some reason. Is there any way to fix this without changing the password?
View 2 Replies
View Related
Jun 4, 2009
So far, I've been able to get my Box (Centos 5.3) authenticate users through LDAP. My next plan was to automount their home directory from our NAS device.But I'm struggling getting autofs talking to the LDAP Server.My Config Files:
/etc/ldap.conf
[root@tmplt_CentOS-5 ~]# egrep -v '^#|^$?' /etc/ldap.conf
base ou=intern,o=zde,dc=simiangroup,dc=com
[code]....
View 2 Replies
View Related
Sep 27, 2010
im using default setting for proftpd and having two major problem for me at least
1. how to disable anonymous login?
2. how to make proftpd login using my default box login?
View 1 Replies
View Related
Nov 4, 2010
I am trying to configure a ftp server (pure-ftp) where I am using CentOS 5.5.
View 1 Replies
View Related
May 16, 2010
I am still pretty new to centos, and I am having some trouble figuring out why after installing proftpd I can't log in. I am running Centos 5.4 i386. I have gone through and installed the rpm forge and updated yum. I have installed proftpd.i386 0:1.3.2-1.el5.rf With a user name I know works through SSH I am unable to connect to the server on port 21. It makes a connection, but the authentication fails saying that the user name and or password is incorrect.
I opened port 21 to my server on my router, and Just for testing, I have disabled iptables. In the /var/log/secure log I find the following error when I try to connect. [ps: I changed the user name in the log to USERNAME to avoid giving out my id. Also changed the ip I am connecting from to MY_IP_ADDRESS]
May 15 22:43:38 webserver proftpd: pam_unix(proftpd:session): session opened for user USERNAME by (uid=0)
May 15 22:43:38 webserver proftpd: Deprecated pam_stack module called from service "proftpd"
View 6 Replies
View Related
Jan 12, 2010
I just opened an (unmanaged) VPS account and and have been encountering nothing but problems with trying to get Apache up and running (its something I've done many times before).Basically the inital error was with LDAP not having enough space, so I disabled the related extensions and Apache still would not run. Looking at the log, it contains: (28)No space left on device: Unable to create scoreboard (anonymous shared memory failure)
View 1 Replies
View Related
Jan 1, 2010
I have problem with sshd server, its authenticate user and then terminate the session. Here is debug log:
Jan 1 04:26:41 server sshd[29677]: debug1: userauth-request for user root service ssh-connection method none
Jan 1 04:26:41 server sshd[29677]: debug1: attempt 0 failures 0
Jan 1 04:26:43 server sshd[29677]: debug1: userauth-request for user root service ssh-connection method password
Jan 1 04:26:43 server sshd[29677]: debug1: attempt 1 failures 0
Jan 1 04:26:43 server sshd[29676]: Accepted password for root from xx.xx.xx.xxx port 50971 ssh2
Jan 1 04:26:43 server sshd[29676]: debug1: monitor_child_preauth: root has been authenticated by privileged process .....
View 2 Replies
View Related
Dec 30, 2010
I've recently installed Proftpd to host for someone for a couple of hours.
With the default config it works however when taken the comments out and edited for anonymous, proftpd fails to start
This is the default config file which works if you have a user and password for my machine, but anonymous wont work (when the comments were removed).
View 1 Replies
View Related
Jun 28, 2009
im using vsftp with : chroot_local_user=YES. I would like to have a commune directory for every user.
View 2 Replies
View Related
Sep 5, 2010
I'm trying to add users.
(Translation: gebruiker = user)
I did this:
I want that only gebruiker1 can be in his map home/gebruikers/gebruiker1
But now he can see the whole server dir.
View 8 Replies
View Related
May 3, 2010
We're still using an NT Domain Server, and Samba is already configured properly. But the problem is if the shared folder is configured in samba to be accessed by group and not the domain username, authentication fails even if the user is member of the group.
Example#1: (authentication successful)
[sharedfolder]
valid users = domain+username
Example#2:
[sharedfolder] (authentication fails)
valid users = @domaingroup
Samba version is samba-3.0.33
View 2 Replies
View Related
May 13, 2010
How can I make the user in remote LDAP server to be used to authenticate Local Linux server ?
View 5 Replies
View Related
Oct 24, 2010
I just installed Wordpress and i am delighted of it, nice peace of software. Even so I have to get running a FTP or SFTP server on my localhost machine. I did installed in my Ubuntu 10.10 the VSFTPD server and generated a RSA certificate file (vsftpd.pem). Strange it is that there is no vsftpd folder under /etc, instead vsftpd.conf file is directly into /etc ... so I have generated also my .pem file into /etc. Anyway I have a lot of trouble adding new users to access this server. I use Filezilla as SFTP client. Please let me know if you encountered such an issue, and what is the solution for it. Downwards is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
[code]....
View 38 Replies
View Related
Aug 3, 2010
pls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies
View Related
Aug 24, 2009
i'm running fedora 10 Gnome ver 2.24.3 kernel 2.6.30.4
i tried to change my /etc/gdm/custom.conf by adding it the following lines:
[daemon]
TimedLoginEnable=true
TimedLogin=your_mike
TimedLoginDelay=0
after reloading gnome it's trying to log through "autologin" but than it give an error message "Unable to authenticate user", i tried using passwd -d on my account but still the error persisted, i saw that some users had this error after a fresh install just with logging into the machine without relation to autologin and they needed to change their password first i tried that as well.
i also tried to edit the /etc/gdm/gdm.schemas file
<schema>
<key>daemon/AutomaticLoginEnable</key>
<signature>b</signature>
<default>true</default> <schema>
<key>daemon/AutomaticLogin</key>
code....
But unfortunately the results were the same, i tried this procedure on a different Fedora 7 and on a virtual ubunto 9.4 machine and is was successful.
View 10 Replies
View Related
Feb 17, 2009
Set up a new cluster service for a cifs share. Has these properties:
Service name = cifs_cases
Autostart is checked
name=cases type=GFS Scope=shared
[code]....
View 1 Replies
View Related
Feb 19, 2009
I'm trying to expand my Courier+MySQL+Postfix+PostfixAdmin server to use SASL logins on Postfix so I can relay on my server. After following several guides I still can't get it to work: Postfix logs show the user transcript and end with "Authentication failure" but it does not tell me what told it that the login failed. The messages log show this:
Feb 19 22:48:55 sportlaan-server saslauthd[7254]: do_auth : auth failure: [user=berend] [service=smtp] [realm=mydomain.com] [mech=pam] [reason=PAM auth error] Which I don't get because I don't think it should be using PAM... I think...
The setup is similar to this one: http://www.howtoforge.org/virtual_users_postfix_courier_mailscanner_clamav_centos_p6
My SASL config has this in it:
/usr/lib/sasl2/smtpd.conf
pwcheck_method: saslauthd
log_level: 3
authdaemond_path: /var/spool/authdaemon/socket
mech_list: plain login
View 2 Replies
View Related
Jul 6, 2011
Can some one help me to configure vsftpd with Virtual and System user
View 37 Replies
View Related
