Ubuntu :: Unable To List Partition Of External HDD
Oct 19, 2010
I have an old external 20GB HD formatted with NTFS. It used to be able to mount in Ubuntu just fine.One day I copied a huge file into it, then suddenly it failed to mount. Initially the message was something like the following:
Code:
Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
[code]....
As you can see the above list doesn't contain /dev/sdb. But when I plug the external HD, the connection light always turns green.If possible I want to save the data and reformat it into NTFS again, but in order to do that at least I have to get /dev/sdb enlisted don't I ?
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-2.6.9.89EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
I can take apart my computer and fix a problem and then re-install the partitions. Hopefully I won't have to re-install, but I want to make backups just in case
-HP laptop with a windows (NTFS) and an Ubuntu (ext3) partition ~ 500GB total -Iomega 1TB external hard drive partitioned into a 500GB NTFS storage, 250GH BLANK ext3 Linux Backup, and 250GB BLANK NTFS Windows Backup.
I want to copy my windows and linux to their respective 250GB spaces on the External HD.
1.) Can you direct me to places on the net that describes this in detail? 2.) Can I copy a partition while running that partition? 3.) Will copying C:/ in windows over to the external HD copy entire partition? 4.) Can I copy a Laptop partition to a external HD partition that is bigger? 5.) Do I have to use partition manager software or can I do this from terminal/cmd prompt?
Evince in non-gnome systems is unable to open external link. The error msg it shows is
Code:
Unable to open external link The specified location is not supported. I have already googled it, however it only says it is a bug, without any solution available. Evince in gnome systems however work just fine. Is there any way evince can use sensible-browser to open external links?
I just bought an external USB DVD (ASUS SDRW-08D15-U) to use on a Kubuntu-based LinuxMCE system. The idea is to set up the computer in the basement and to retain the ability to play DVDs on the 2nd floor home theater. Unfortunately the DVD would not play movies, music, or show files when connected to the Kubuntu/LinuxMCE machine. I tested the drive on my windows laptop and it worked fine. Then I connected it to my Ubuntu desktop machine and got the same behavior as on the MCE machine.
This leads me to believe that my hardware is functioning fine, but I have an Ubuntu/Kubuntu issue. I figure if I can get the drive to work on my Ubuntu desktop, then I can apply the fix to my MCE machine. I opened the Palimpsest Disk Utility (System>Administration>Disk Utility) and saw my internal DVD listed (ASUS DRW-1612BL). When I hot-plugged the external DVD it appeared underneath the internal drive. But here is the strange part - when I insert any type of media into the external drive it Vanishes from the list, accompanied by a repetitive pattern of clicking and whirring noises. Very mysterious.
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
i was installing Ubuntu 10.04 on my laptop. But when the installer reach step 4, i cannot see my partitions on my computer that i has previously made. I already enter the manual partition editor sectin, but the list show that my harddisk has no parition no it. The weird thing is that i can normally access my partition on ubuntu live-cd's file browser, but it didn't appear on my installation wizard. Here is a screenshot of my desktop:
Basically, I don't want to see my dual booted xp boot. At all. Yes, I want GRUB to see it, so I can chose, but I would love to have it completely ignored once I load Ubuntu even for intruders. I did not like being able to just click my Windows partition thinking of the brutal things that could be done to it since it's not even booted.I am aware I can make a second user who has admin privileges, but that is similar to my other question...
[URL]
And I would rather it not be accessible to anyone with or without administrator privileges.
i m mounting one ext4 partition onto some folder inside /home, have added things on fstab but now i dont want this thing to be listed on the desktop or on the places menu. i m using karmic.i have checked gconf-edit but
I have only used Windows. Yeaterday, i decided to try Ubuntu 10,04, since I've heard so much great about it. My problem is, when I am supposed to choose which partition to inastall on, the list is blank! it shows nothing at all... the frames and all are there, but no drives to choose from. I'm installing from DVD with .ISO file.
My Hardware:
AMD Athlon xp 2400+ 2,00 Ghz 1,25GB RAM Current OS: Win XP
I've used ubuntu 10.10 in dual boot (wubi) demo mode and I now want to install on a logical partition in an external USB drive. I've got ubuntu-10.10-desktop-i386.iso sitting on my ubuntu desktop ready to burn into the external partition already formatted ext4 and bootable flag set. See snapshot attached. I follow the instructions here ..
[URL]
to open
System > Administration > Startup Disk Creator
I select the target external partition where I want to install ubuntu. However the button "Make Startup Disk" is not in focus and cannot be clicked to burn ubuntu into the partition. Nor is the text "when starting up from this disk, documents and settings will be: .." with radio buttons in focus. See the snapshot attached.
The button "Erase Disk" is in focus .. but I'm not sure if this should be clicked first or if it would erase the target partition /deb/sdb3 .. or the entire disk /dev/sdb So what step have I missed in basic installation procedure to install into /dev/sdb3? Try as I might I cannot attach a label - RECOVERY - to /dev/sdb9. I'm attaching snapshots of the freshly partitioned external USB disk.
I'm running 10.04 X86_64. I have this 650 GB External Hard Drive With three partitions: one fat32 and two ext4. Sometimes when I plug the drive in X crashes. I get no response at all from the keyboard but the pointer works. I am able to minimize and maximize windows but i cant close them and i cant click on the top bar. Today the error occurred after I transfered some files from one of the ext4 partitions to a 320 GB External HD(single partition FAT32). I pressed the ctrl + alt+ f1 ( to go to the shell :-/) and this strange lines of code where showing up over and over again:
I have an external hard drive (500GB) that I partitioned and would like to use the second partition to add extra storage space on the computer running 10.04 server (100 GB HD). /dev/sdc2 is the partition I would like to add via LVM to the 100GB HD; dev/sdc1 contains data I already use.
I am currently downloading Ubuntu from a torrent at: [URL]. The file will be Ubuntu-9.10-alternate-i386.iso at 689Mb. I have a dial-up connection so the download is taking a long time to complete. I understand this to be a disk image file. I am using Windows XP v5.1 (Build 2600.xpsp_sp3_gdr.090804-1435 : Service Pack 3) as the operating system on my Emachine. This computer supports booting from a USB drive in the BIOS. I also have a DVD/CD +R+W drive to burn a disk image to if needed.
In short I want to install Ubuntu on a bootable partition of a NTFS external USB hard drive. The external hard drive is a Western Digital 320Gb USB 2.0 that came formatted as NTFS. I plan to use "EASEUS Partition Master 4.1.1 Home Edition" to create a ~40Gb NTFS partition on this drive for the Ubuntu install and any future Linux applications that I will acquire. The larger partition will be used for Windows backup storage and as a portable drive with a number of portable windows applications.
1) Should I use another file system other than NTFS? FAT? FAT32? Something Linux? 2) What steps are required to install Ubuntu on the partition?
In addition I would like to try to run Ubuntu inside a "shell" inside Windows XP from time to time. I have software (VMware player v3.0.0-197124) that I think can accomplish this. I have the following security and utility programs running: WinPatrol (real-time) SpyWare Terminator (scheduled scans) WinMem Optimizer (real-time) ThreatFire (real-time) PC Tools FireWall Plus (real-time) Avast Antivirus (real-time)
3) Are any of these programs known to interfere with the installation of Ubuntu or with Ubuntu running in a shell?
I just bought a new external 1 TB HP hard drive that came with two partitions.One larger for storage and another 700 MB partition called hplauncher as a sub-file of what shows as a CD drive called HP virtual CD 4607 which held files for windows automatic back up. Which I don't need.Both the CD and launcher drives do not allow for deletion or formatting. The larger drive does.I am viewing it in the Palimpsest Disk Utility that cam with my Ubuntu 9.10 clean install.
I am trying to install Ubuntu through the live CD to a resized partition on a External HDD.But when I try to boot into it, I get:error: unknown filesystem grub rescue> The boot loader is on the external HDD
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.
To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.
However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
Been using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code: jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda Disco /dev/sda: 250.1 GB, 250059350016 bytes 255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total Unidades = sectores de 1 * 512 = 512 bytes
I have an old external 20GB HD formatted with NTFS. It used to be able to mount in Ubuntu just fine. One day I copied a huge file into it, then suddenly it failed to mount. nitially the message was something like the following:
Code: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
I just got a new WD Studio External USB 2.0/FW800 hard disk drive, it is formatted to HFS+ with Journaling (hfsplus) and I use it for both an iMAC and a PC/Linux. The problem is that on my PC (Linux - Ubuntu 9.10) there is always some kind of read-only error whenever I try to edit, create, delete anything on it. I tried it on my iMAC and I'm able to read and write on it with no problem.
The mount command on Linux gives me: /dev/sdc3 on /media/My Passport type hfsplus (rw,nosuid,nodev,uhelper=devkit) Clearly indicating that it ("My Passport" on /dev/sdc3) is mounted as "rw" (read and write, not read-only). I tried connecting it via Firewire 800 and USB 2.0 and both give me the same results. I also tried fixing it in my iMAC using Disk Utility but it reports on problem and I clearly safely "Ejected" it before unplugging it from my iMAC.
I am keen to start using Ubuntu and have installed it on one of 4 partitions on my new 1 TB external HD. I got to the reboot stage where I was expecting a new boot screen where I could decide to use either XP or Ubuntu. But there is no mention of Ubuntu just XP and the volume I installed Ubuntu on has disappeared. I can find the other 3 volumes on My Computer.
red minus sign next to internet and following states..... E: Type 'cat' is not known on line 45 in source list /etc/apt/sources.list E: Unable to lock the list directory
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.o do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press en
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation. To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record. However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
I'm wandering if it is possible to set up a partition on a laptop's HD so that if I use a USB cable between it and another device, the partition would appear as an external HD on the device.
Old Mac laptops used to have the option at boot-time of sharing the hardrive via firewire (they might still have it, have no clue) I'm looking for something similar, but on a laptop with Linux running on a different partition.
