I am unable to list windows shares from terminal. I am getting the following error,
Code:
root@ubuntu:~# smbclient -L 172.29.33.10 -U karthick
params.c:Parameter() - Ignoring badly formed line in configuration file: # Samba config file
WARNING: The "Share modes" option is deprecated
Unknown parameter encountered: "read Size"
[Code]....
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies View RelatedI have a machine with Windows 7 Ultimate with several shared folders. Then I have VMWare with Ubuntu 10.10 as guest running. Samba runs in Ubuntu and in Windows, I can see the shared folders of the Ubuntu guest (read and write) as well. This morning I saw the shared folder of the Windows host and I could still open it manually in the Ubuntu guest. After this, I wanted to mount the folders permanently with fixed entries in the /etc/fstab. This failed and now I can't see the folders of the Windows host in the Ubuntu guest..
View 3 Replies View RelatedI am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
We are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"
View 8 Replies View RelatedI had windows 7 on my computer on drive D,then I installed opensuse 11.2 on space of drive C. But when I restarted my computer,I couldn't see windows 7 bootloader on the list, all of the options related to opensuse.
View 5 Replies View Related1. Maverick Meerkat 10.10
2. Vista Ultimate
I'm successfully connecting to my Vista desktop via my laptop running MM;I can view my shares but not all my data. All top level shares seem to be visible, it's when I go deeper that I notice not everything is showing up. The folders are accessible if I type the full path, and then again I have the same issue once I'm inside that folder where not all data is visible.
In Nautilus setting: Edit>Pref>Preview Tab.I set preview for all files under 4GB which is the upper limit I can set.This made more files visible but not everything.I attempted to divide the directories in order to halve the size of the folders, this helped but not completely. The directories contain movie and picture files. The picture files are easier to divide more equitably between folders, but the movies being so large, managing folders sizes in that way doesn't help. I really don't want to divide my files according to this problem anyway. Sorting does not affect which folders and files are shown. Nothing is hidden, options to show hidden files on amd off, no help.
It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies View RelatedI have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3
[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]
[code]....
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code:
peter@Desktop:~$ ls /net/10.2.1.21/
opt
peter@Desktop:~$ ls /net/10.2.1.21/opt/
sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
Simply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
I have been quite frustrated searching around for others that have had the same problems as I have had an what solutions are available. It appears there is a plethora of issues surrounding file sharing between Ubuntu and Windows machines; but things work prefectly for some and not for others.
The specific problem that I have having is that I cannot access file shares from any of the Windows 7 machines on my network. I use a Windows 7 machine for the main source of files that I like to access from other machines on the network. I do not normally access it from other Windows 7 machines through a Homegroup (I have removed the Windows 7 PC from the homegroup while trying to figure this out as well) - I normally just browse the network via the Windows 7 machine.
Here is what I'm doing (and seeing):
1. Click on home folder icon on Unity's launcher
2. Click "Network" in the sidepane
3. Wait a long time (like 40 seconds or so). "Windows Network" is the only folder/icon showing up in the "Network" folder once it shows anything.
4. Click on "Windows Network"
5. "WORKGROUP" shows up
6. Click on it
7. There is a delay with no visual indication (other than nothing happens and clicking in that window does nothing) and then I see "Opening "WORKGROUP" - Click cancel to stop"
8. See "Unable to mount location - Failed to retrieve share list from server"
I ran 'smbtree -N' and see a line for the PC I'm currently using, plus I see the following line for the other two PCs in the workgroup "WORKGROUP" (name is different for other PC):
Code:
\MEDIA-PC
cli_start_connection: failed to connect to MEDIA-PC<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL
I've seen guides to auto-mount certain shares from other projects to specific locations, and I'll probably do this at some point, but I really want to be able to browse the other machines shares.
Code:
session request to 192.168.1.3 failed (Called name not present)
session setup failed: NT_STATUS_LOGON_FAILURE
I am running Linux Ubuntu 10.04 and I currently have this computer and another Windows 7 PC connected together in the same workgroup. When I look at the Network on the Ubuntu File Browser, I can see the windows 7 pc there, but when I try to open it, I get the message Password Required - it wants a username, password and domain (the domain box is filled in with the workgroup name). Whatever set of credentials I try to input, the box just pops up again asking for password. Password protected sharing is disabled on the windows 7 pc and I have even tried disabling Windows firewall to no effect. I am very new to Ubuntu and Linux and am therefore completely stuck - what I really want is to access a shared printer connected to the Windows 7 pc from the Linux machine.
View 9 Replies View RelatedI have Ubuntu 10.04 set up on my acer revo, this is connected to a wireless router via ethernet. Next door, is a pc that is running windows XP, and an original XBOX running XBMC. Those are connected via a crossover cable. The XP machine connects to the web wirelessly using my router, and the connections are bridged for XBMC's TV show scrappers. The idea is we use the revo for downloading as it consumes a relatively small amount of electricity. I have two external 1tb drives connected to the revo with Tv shows and movies, I would set up a network share so the XP machine could see them, and the xbox would be able to share the videos present.
I have installed samba, right clicked the drives in question and clicked the sharing options. I have ticked to allow guest access, and write access. This worked! I the shared the /home directory on the revos harddrive using exactly the same method. This worked. However I was no longer able to access the External drives. The UID has remained the same. I then tried unsharing /home, still no joy. Tried resharing /home Home now works, but still the externals don't.
I have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
I updated one of my windows boxes from XP to Windows 7 and now my Ubuntu boxes cannot connect to the shares on that windows box! I have done a lot of research on this and anything I try does not work.
View 1 Replies View RelatedI've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
View 8 Replies View Relatedi have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
View 3 Replies View RelatedIm setting up a Mythbuntu box as a HTPC, and I want to be able to stream my media from my Windows box to the Mythbuntu box. I got the windows shares mounted fine, everything works. But I want them to auto mount so I modded my /etc/fstab file to mount the share. The problem is the Mythbuntu box uses wifi, and during boot the computer can't connect to the Windows box, and it hangs on
Quote:
Error while mounting /blah/blah/ press s to skip or m for manual recovery and I am planning on not having a kbd hooked up to this computer once it is done.
1) Is there a better way to auto mount Windows shares - one that does the mounting after the computer is booted up? Furthermore, the Windows box may be off, so I want it to just skip the mounting on error.
2) Right now when I mount the share, I have to specify the Windows computer by its IP address. If I do it by PC name, it doesn't work, says it can't find the computer. Is there a way to mount using the computer name, so that if my router decides to give the windows box a new IP I wont have to reload everything?
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
View 6 Replies View RelatedI have: ubuntu 10.10 => joined into Active Directory Domain (test.net) I can login using AD users using Likewise-Open I have in my Windows environement Home Folders (Shared by AD) for every user and it apears as Z: Drive automatically when I loged in using windows machines. I need same setup using ubuntu desktop to show these Home Folders for every users automatically when he logs in.
View 1 Replies View RelatedMy first post, having only installed 11.04 at the weekend on one of my old PCs.Everything is up & running pretty well, I have a 100BT home network with 4 Windows XP PCs and a Synology DS211j server.I can see & access these other shares from Ubuntu, but it's so slow to connect, approx. 45 seconds each time, compared to almost instant from any of the XP machines.Could someone suggest how this performance could be improved?
View 2 Replies View Relatedon 10.04 I clicked to share my music folder with the network (other computer also having 10.04) and it installed samba for me. I restarted expecting to find sharing working as it had on the other computer by doing the exact same thing. But for some strange reason I can't access the shares on either computer through the network workgroup. It just says "Unable to Mount Location".
View 7 Replies View Relatedi have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
First off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..
View 13 Replies View RelatedAll of a sudden my terminal output changed from the traditional looks to giving only lists(one item per line) as output to "ls" command. Because of this, when there is a large number of files in a directory, I have to scroll up and down to see all files. A link to the screen shot is given below.
">
I tried "reset" and did not make any difference.
Fairly new to Karmic - wanting to setup some Windows Shares on an external Hard drive. I understand that I need to install Samba to do this but when I try to install it I get the following message:-
pat@CCBC-13112:~$ sudo apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package samba is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source
However the following packages replace it:
samba-common-bin smbclient samba-common
E: Package samba has no installation candidate
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies View Related
