I'm trying to format/repartition a 250 gig external Seagate drive. I get the following error:
Code:
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdc, start=32256, size=250056705024, type=0x83
Entering MS-DOS parser (offset=0, size=250059350016)
MSDOS_MAGIC found
[code]....
I just bought a new external 1 TB HP hard drive that came with two partitions.One larger for storage and another 700 MB partition called hplauncher as a sub-file of what shows as a CD drive called HP virtual CD 4607 which held files for windows automatic back up. Which I don't need.Both the CD and launcher drives do not allow for deletion or formatting. The larger drive does.I am viewing it in the Palimpsest Disk Utility that cam with my Ubuntu 9.10 clean install.
View 8 Replies View RelatedBeen using a SeaGate FreeAgent external drive for past 6 months. Suddenly the ext2 partition (/dev/sdb2) won't mount, while the NTFS partition (/dev/sdb1) does.I've been allowing automount, no entry in /etc/ fstab.When the NTSF partition mounts there appears an entry
View 7 Replies View RelatedComputer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies View RelatedI am keen to start using Ubuntu and have installed it on one of 4 partitions on my new 1 TB external HD. I got to the reboot stage where I was expecting a new boot screen where I could decide to use either XP or Ubuntu. But there is no mention of Ubuntu just XP and the volume I installed Ubuntu on has disappeared. I can find the other 3 volumes on My Computer.
View 3 Replies View RelatedI have the following "setup:"
iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]]
|
|
|[code]...
I routinely use the firewire drive to boot MAC OS X.However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd).My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)...Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.
My brother has an external hard drive that has some personal data on it that he doesn't want to lose. He was reinstalling windows on his machine and deleted both the partition on his internal drive and on his external drive. He installed windows on his internal drive only though. I want to be able to reaccess that data from the drive. All the data should still be on the drive since so write cycles have been done to overwrite it.
I guess deleting the partition removed the partition table or something so the drive doesnt mount. I would prefer to use linux (but windows is ok too) and a free as in beer tool preferably. there are normal recovery tools (I have used get data back before) that scan for any files anywhere that has been overwritten but I don't really need things that have been overwritten; just the data that is still there but not availible because it cant be mounted.
What im trying to do is install ubuntu on to an external hard drive, partition it and make it work. ive got a problem, as i have 200GB of games and other things already on that drive, before you say "copy it to another drive and then back" i cant, i dont have any other drives apart from my internal which has only got 20 gig left
View 5 Replies View Relatedis there a way of sharing an ext3/ext4 formatted partition on an external USB drive between different users (uids) on different Linux machines without creating a group for this purpose, setting the group ownership of the partition to this group and adding each respective user to the group on every machine?This would mean that I need to have root privileges on every machine... which I may not have in some cases.I'm using the partition to store the code I'm developing on Linux and I would like the option to be safe... if possible.I could use a vfat partition but then I have no control of the rw rights + I cannot develop directly in the dir: I would always have to tar.gz the directory, extract, work, tar.gz, copy to the external drive.
View 2 Replies View RelatedI've got an external hard drive with one large data partition on it. I also have four computers to connect it to (individually, not at the same time). Three machines are running Slackware and one is running Ubuntu 9.10. I need to be able to just plug the drive into whichever machine, mount it (preferably to the same location each time) and not have to worry about user permissions and such. Do I just chmod 777 all the files and folders or is there a better method for different 'users' to access the same partition? And how about mounting to the same location each time?
Now the second part of my question I'm pretty sure I'm not able to do but just in case..... is there any way to encrypt the information safely and make it compatible with a Windows XP machine?
Recently my laptop broke down and wont start up. I'm currently trying to recover my files to my mac with an IDE to USB cable. It recognized my windows partition fine and I was able to get all my files off of that, but the majority of my stuff is on the ext4 partition that I have on it. Does anyone know how to access the ubuntu partition of this hard drive from my mac?
View 2 Replies View RelatedI'm new to the ubuntu forums as well as ubuntu. I'm excited to learn more about linux itself as well as ubuntu. I got ubuntu 10.04 running on my toshiba L505D laptop by disabling acpi in the boot commands. My first question is how do i do this permanently, is this bad, and would updating fix the issue? If so how would I go about updating.
Secondly, when the external hard drive I installed ubuntu on is not plugged in to the laptop, GRUB rescue comes up. I kind of like this because it provides a level of hardware security. I would however like to know how to load my windows partition encase the external hard drive fails.
I've been running Linux for a year on our family computers (one desktop, one laptop and two netbooks). I've run into a problem with the encrypted ext4 partition (270GB) on a LaCie external hard drive which also has a NTFS partition (50GB) which is not encrypted . First two times I tried using the encrypted ext4 partition (from two different computers) it worked fine but now I can't access it at all. I can still access the NTFS partition.Encrypted external hard drive partition will unlock but won't mount (or unmount). The computer says "Opening 320GB Hard Disk" but after a minute says, "Unable to mount location. DBus error org.freedesktop.DBus.Error.NoReply"Disk utility (GUI for gparted I believe) states that the encrypted partition (/dev/sdb1) is unlocked and the underlying partition (/dev/dm-0) is not mounted but it has a "busy circle sign" on it that will not turn off. The NTFS partition on the same drive mounts and accesses normally.
But if I try to unmount the NTFS partition, it says: "Unable to stop drive. One or more partitions are busy on /dev/sdb"If I try to shut down the computer, it is unable to shut down because (I assume) it can't shut down that drive either. So I have to just turn off the computer.fdisk states that /dev/dm-0 doesn't have a valid partition table [full output attached]fsck suggests: "Filesystem mounted or opened exclusively by another program?"ps axuf shows some processes running on /dev/dm-0 but killinghem doesn't release the drive either. [full output attached]I checked /etc/blkid.tab (suggested in one vaguely related thread) and there's no actual file only a broken link pointing to /dev/.blkid.tab (which doesn't exist). I tried deleting this link and rebooting but that didn't change anything.when I finally gave up my data as lost, I tried to format the partition (using Disk Utility) and it refused saying, "One or more block devices are holding /dev/sdb"
I tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
View 9 Replies View RelatedWhenever I plug an external harddrive to a CentOS system,all partitions mounted will have noexec that makes my binaries or script files not executable.
Quote:
[root@centos52-64-dell ~]# mount
/dev/sda3 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[code]....
I have to remount it using, e.g.,
mount -o remount,exec /dev/sdb1
But I am sick and tired of doing it everyday. What I can I do ?I don't want to use /etc/fstab to solve this problem becauseit will cause booting problem (curable though) when the hard drive is not around.
OpenSUSE 11.2 server, Gigabyte GA-MA790X-UD4P sda for system, 3 ext4 partitions, working fine.sdb promise RAID1 for data, 1 ext4 partition, working fine.sdc is an eSATA docking station for data backup, 1 encrypted ext4 partition -- here lies the problem.
This configuration has been functional for months until I decided to add two more external drives (sdc) to rotate through backups. I had difficulty with encyption on the first new drive and eventually decided to start over. Using the gui Yast Expert Partitioner, I deleted the single partition. That began a real nightmare...
Since deleting the partition, the system detects drives inserted in the docking station, but does not report them (including a different fully functional drive and a brand new unused drive). I have tested all drives on other computers and they function perfectly. I have rebooted the system several times while troubleshooting this issue.
Could not recreate the partition on server (since it does not recognize the drive), so I used Gparted on another computer - it all went without a hitch, formatted ext4. But when I placed the drive in the dock, the drive still was detected but not recognized.
Details:
BIOS lists the eSATA drive
Entering Yast Expert Partitioner, error message follows:
The partitioning on disk /dev/sdc is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sdc as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool.
Yast partitioner shows drives: sda, sda1, sda2, sda3, sdb, sdb1 sbc is not listed.
# fdisk sdc results in: Unable to open sdc
# dmesg | grep tail reports:
[48442.370779] sd 0:0:0:0: [sdc] Unhandled error code
[48442.370793] sd 0:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
code....
So how did partition deletion cause this issue, and how do I correct the problem? It is possible that my difficulties encrypting the first new drive are related (it's not my first time doing it successfully). It seems the problem is in the Kernel or configuration. I have invested many hours in forums and on google - tried dozens of possible fixes. I'm beginning to suspect system corruption or a bug, however all other system functions are working perfectly.
I have a 1T Western Digital external hard drive. As usual my first thing to do was use cfdisk to wipe out the existing partitions and create new ones. When I plug it in, it mounts a "partition" which does not show up in fdisk, and it mounts it as if it were a CD (ie. /dev/srx instead of /dev/sdx) labeled WD Smart Media or something like that.
View 4 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I can take apart my computer and fix a problem and then re-install the partitions. Hopefully I won't have to re-install, but I want to make backups just in case
-HP laptop with a windows (NTFS) and an Ubuntu (ext3) partition ~ 500GB total
-Iomega 1TB external hard drive partitioned into a 500GB NTFS storage, 250GH BLANK ext3 Linux Backup, and 250GB BLANK NTFS Windows Backup.
I want to copy my windows and linux to their respective 250GB spaces on the External HD.
1.) Can you direct me to places on the net that describes this in detail?
2.) Can I copy a partition while running that partition?
3.) Will copying C:/ in windows over to the external HD copy entire partition?
4.) Can I copy a Laptop partition to a external HD partition that is bigger?
5.) Do I have to use partition manager software or can I do this from terminal/cmd prompt?
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View Relatedi have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedIs Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies View RelatedSo I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
I'm not sure what to do, but I just rescued photos and documents using ubuntu live cd, gddrescue and photorec. The data carving went fine and I was able to move all of my recovered jpg's into a recovery/jpg folder, as well as my word doc's into a recover/doc folder. I also have recovery/video and recovery/audio. Now here's my problem...
I used the right-click "safely remove drive" from the ubuntu interface and then unplugged my external drive. I then tried to view the recovered photos, etc on my windows 7 desktop, but when I plug in the external drive I get an error and a prompt to "format the drive" so that windows can use it.
I plugged the external drive back into my failed laptop and with the ubuntu live cd can see the drive, but none of the folders display. I can cd "change directories" to all of the folders using a terminal, but still can't see them outside of the terminal. That is, with the ubuntu interface. I'm just trying to finish up recoverying these photos, which I thought I had done.
I formatted a 16GB USB flash drive via right click. Then I ran gparted and got as far as this [image attached]
Do I choose Primary Partition or Extended Partition for this second partition?
I installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
/dev/sdb1 478711768 137858256 316536328 31% /
/dev/sda1 101089 15346 80524 17% /boot
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies View Related