I can find various information on the tinterweb about configuring a Logitech MX1000 under various old releases of Ubuntu, but I can't find anything relevant to Lucid Lynx.
View 2 RepliesI'm attempting to make my Logitech Quickcam Express work with Ubuntu 10.04.I what may be the problem but it doesn't seem to work with any of the applications so far. I visited [URL] and attempted to extract and compile the drivers but ran into problems.
Code:
incarnation@incarnation-desktop:~/Desktop/qc-usb-0.6.6$ make all
make -C "/lib/modules/2.6.32-22-generic/build" SUBDIRS="/home/incarnation/Desktop/qc-usb-0.6.6" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
[code]....
I recently ran "sudo apt-get autoremove" in the terminal and I was given an error message citing the following:
I believe this is a result of a failed Banshee Media Player installation that left the specific package installed. I ended up removing Banshee entirely. I have tried using Synaptic Package Manager and Computer Janitor to remove the package, but neither has worked, both returned the error exit status 2 message. Computer stats are in my signature.
I have just upgraded my OS from ubuntu 9.10 to 10.04.Now I'm facing problem of not having write permissions to USB drives (Pen drives).I have to use terminal with sudo to copy , move files and unmount media.
View 4 Replies View RelatedI installed Lucid Lynx this morning but received this error message after the restart. "An error occurred while mounting usbfs. Press S to skip mounting or M for manual reboot"
View 2 Replies View RelatedI'm having an annoying issue with my display configuration.
Some specs:
Motherboard: MSI 760gm-e51
CPU: AMD Phenom II 955 Quadcore
MEM: 8Gbs DDR3
VGA: ATI Radeon HD4850
ATI Radeon 3000 (on board)
All four monitors work fine with two X servers ( 2 monitors each instances) on Ubuntu 9.10 with surroundview enabled in the BIOS. I did a fresh install of Ubuntu 10.4 and all i get is 4 blank screens. when i disable surroundview in the BIOS with PCIE as default display the HD4850 work great. I should add that on both installs i used the latest atalyst 10.4. It seems like there's something wrong with Ubuntu 10.04.
Here's the xorg.conf of the working Ubuntu 9.10:
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 1050
Screen "amdcccle-Screen[1]-0" 624 0
[code]....
I am using Ubuntu 10.04 , but after updating ubuntu using update manager, I am unable to install software using software Centre.When I click install button the software centre does nothing. Update manager concluded
View 4 Replies View RelatedI've just upgraded from 9.10 and everything is good, accept that netbeans will not load.
I get the netbeans 6.8 splash screen then nothing
I am trying to install Lucid on my Laptop but can't get the live cd to boot correctly. At the moment, it's giving me a purple screen with a white logo at the bottom, then a black screen with the underscore character blinking, and then nothing. (I have an HP tm2, with a USB DVD/CD drive. 64bit intel core 2 duo. I am using the Ubuntu 10.04 Desktop AMD64 .iso. I also tried the i386 .iso)
View 1 Replies View RelatedUbuntu 10.04 is unable to set up my Canon Pixma IP 6000D printer.So earlier tonight when my wife wanted 2 recipes she saw on this am's Today Show, I had to restart my computer with a Fedora 13 live CD in the drive. F13 quickly installs my Canon printer and I am able to print the recipes.But this sure is a convoluted way of printing 2 short text files.to get my printer to work with Ubuntu.I've been using Ubuntu almost 2 years now, and love it, love it, love it, except for this one little thing.
View 3 Replies View RelatedWhat exactly are the different features btw Ubuntu 10.04 LTS vs 10.4.1 Lucid Lynx?
View 4 Replies View RelatedQuote:
The new Wacom Bamboo Pen (CTL-460) doesn�t work in Ubuntu Lucid out-of-the-box. You need a newer kernel module than the one that comes with Lucid by default. It�s pretty easy to get it working though, you just need to know how.
First, install some compiling tools and header files:
Code:
Code:
Now unpack, configure compile and install it:
Code:
# I know this is the wrong version, but it's the highest available and it works
Code:
The tablet should work now. You can also add the module name to /etc/modules to automatically load it on boot.
He also says (and I can confirm) that the gray lines are the new borders of the tablet. A little annoying, but I imagine one could configure that, too.
I upgraded from Karmic to Lucid yesterday and today today I've noticed that I can no longer apt-get update through the terminal. I'm behind a corporate firewall, so up till now I've always exported the proxy address like so:
Code:
export http_proxy=http://user:password@address:port
This hasn't worked under Lucid. I did some searching and found that Lucid did away with
[code]....
I have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?
View 5 Replies View RelatedIs there someone from Dallas, Texas, USA area? I've got a friend there with lucid lynx on a netbook - and she says something's gone wrong with it - she cannot boot. Maybe someone could maybe somehow meet with her and see if there is a possibility to fix it? As i don't really know what's wrong but I am on another end of the world and have no chance to figure it out.
View 2 Replies View RelatedI've got a generic USB keyboard (not wireless) that works perfectly on WinXP, the BIOS and the GRUB boot menu. As soon as Ubuntu 10.04 loads, however,he keyboard stops working. Tried different ports, still nothing. I haven't tested on previous versions of Ubuntu or other Linux distros. A PS/2 keyboard works great on Ubuntu except the one I have is broken, hence why I'm using this USB keyboard. Any ideas on how to fix this? It's the only thing holding me back from leaving Windows for good. lsusb:Quote:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
When I try logging in using any user name, ubuntu just returns to the login screen. I cannot actually log in. I used the recovery mode to create a new login with password 123456, and the same thing happens. What could it be? Ubuntu worked just fine for a while, then DKMS started causing problems, I had errors with upgrades, software installs/uninstalls, then my sound went. I found a great fix for the sound (https://help.ubuntu.com/community/SoundTroubleshooting), the sound came back, but then I could not log back in again. I cannot find any help for this issue, and had to install 9.10 Karmic Koala, and that's what I have been using for the past couple of days.10.04 has been fairly buggy for me and I am considering staying with 9.10, or going to another Linux distro.
View 7 Replies View RelatedI recently installed ubuntu 10.04 lts. Whenever i boot ,it hangs the moment i log in. I had the same problem with 9.10 as well.
View 1 Replies View RelatedI have just updated ubuntu from koala to lynx via reloading the synaptic repositories, and after having restarting, to boot into lynx, found that my laptop's keyboard doesnt work, none of the keys are reponding at all, which is odd as I have never had this problem with my laptop before.. I thought this might have been a (semi) common problem with lynx, but after a few searches, have not found anything similar to this problem..Does anybody have any idea what might be the problem here, I can still use the laptop to do things via the mouse and even access the internet and grab text and paste it for things, but obviously would like my keyboard back (i didnt write this on my laptop!) I am 99.9% sure it is not a hardware problem
View 4 Replies View RelatedI don't know how many has had this problem, but I understand I am not the only onehe problem is that after using synclient to disable the touchpad in 10.04 it would enable itself, seemingly, at random.Well, what I found was that unchecking the "Disable touchpad while typing" feature in "System->Preferences->Mouse->Touchpad" will fix the problem.Apparently the system does not recognize that the user has deliberately disabled the touchpad. And so it will reenable it when the user is "done typing".
View 5 Replies View RelatedWhen Ubuntu tries to update I get an error message saying it was unable to synchronize files in the repositories and an older index will be used.
View 2 Replies View RelatedWhen I'm connected via NX and press the up button, Ubuntu takes a screenshot. I filed a bug, but this makes it absolutely impossible to use the machine.
View 2 Replies View RelatedI've been installing and uninstalling POedit 1.4.2-5build0.1 Ubuntu 10.04 Lucid Lynx.POedit is installed but it loads for around 10 seconds and then just go away.I'm installing it using Synaptic
View 3 Replies View RelatedI've recently built a half-new computer and installed Lucid Lynx on it.I managed to get everything else working and even got the ATI drivers installed. However, I can't get above 60 Hz on my old CRT monitor - the ATI driver controls have 60 as the highest selectable refresh rate. The preferred 1152x864 screenmode works fine otherwise.
Here are the known specifications:
Monitor horizontal refresh: 30-86 kHz
Monitor vertical refresh: 50-150 Hz
Known working display mode on earlier graphics card: 1152x864, 85 Hz.
My motherboard (with integrated graphics) is the Asus M4A88TD-V EVO/USB3 AMD 880G AM3. The GPU is Radeon HD 4250.The ATI drivers seem to have "taken over" the xorg.conf, so I don't know where to input any values.
I recently installed Maverick Meerkat on a hand me down laptop. And noticed that when I entered the password for admin privileges to install from the update manager, a key icon appeared on the top bar. I moused over it and saw I could use THAT to end privileges before the 10 minute grace was up. I should have thought of it before, and, small as it is, I thought this was a great feature.So, when I upgraded from Karmic Koala to Lucid Lynx on my desktop, I thought that feature would be there, but it's not.So first I'm wondering if it's there, but just not default. If so, how do I get that icon to appear? If not, how do I otherwise end admin privileges early?
View 3 Replies View RelatedI tried for the better part of two hours to change the icons for my pdf files in ubuntu. For some odd reason, the icon for my pdf files is the same as the icon for the .odt and .doc files.
View 2 Replies View RelatedI was running a small LAMP setup on my homenetwork with Ubuntu 9.4. Every thing was working OK. I then upgraded to 10.04 and now my php does get executed. Apache is still working, but I suspect something in the config has changed, but I don't know what.When I try to load a .php file, the resultant web page is just blank, if I have a .html file with php code in it, the page is not rendered from the point where the php starts. I have checked /var/log/apache2/error.log and there is nothing in that file.
View 5 Replies View RelatedI'm using Ubuntu 10.04 (lucid lynx).
It was OK after some of kernel updates (I guess):
It doesn't auto mount CD/DVD when I insert them.
When I insert CD/DVD system writes this in "syslog":
Code:
And when I try to mount it manually it writes:
Code:
when I reboot system it works correctly again!
I made ISO images of some of DVDs in a windows box and transfered them in my ubuntu and tried to mount them and there were no problem with ISO images! the problem is with the physical CD/DVD !
On Ubuntu 9.10 my Logitech C250 webcam just works. On Lucid the mic works but no video. In Cheese and Skype the webcam's LED is on but just a blank image. ls /dev/video* gives video0In Cheese and Skype the device is listed as UVC Camera (046d:0804) (/dev/video0)
View 2 Replies View RelatedBoth in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies View Related