yesterday I've decided to upgrade ubuntu from hardy to lucid on my poweredge server.
unfortunately, I've found an error that I'm not able to solve:
Code:
sudo apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
I upgraded to Lucid last night, and I'm getting this error when I try to run virtualbox-ose:
Quote:
Kernel driver not installed (rc=-190 Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
I try it, then I get:
Quote:
modprobe vboxdrv
FATAL: Module vboxdrv not found.
I have no idea what's going on. Can anyone help? The version of virtualbox is 3.1.6-dfsg-2ubuntu2
I'm having small boot issue with my present Linux box, which is presently running Ubuntu 8.04 LTS. When booting from a Live CD, Ubuntu 9.xx+ or any other linux variant I have, the machine will come to a complete stop about half way into the boot process. I think this may have something to do with the WiFi card that I have installed. Are there any suggestions that could help me remedy this problem short of removing the card itself?
View 9 Replies View RelatedRecently tried to install a new Wine package, but the install failed, so I removed it and reinstalled the old one. That installation also failed, and now the package is in a half-installed state and can neither be installed nor removed. I'd be most grateful for some help - I miss my Wine!
# apt-get install 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
# apt-get remove 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
What does it mean by "an archive", and where can I find one?
I just upgraded from 9.04 to 10.04 and so far I have those problems:
1. Before, everything in my system was in English. Now, half is in English, half in another language (PCManFM, some menus etc). I tried setting up Language Support but it changes nothing.
2. Cursor themes work only when hovering the mouse over "X" buttons in the right top corner of the window. As soon as I move the mouse somewhere else, it goes back to default cursor theme, even though I tried selecting 5 different themes - same result.
4. Hibernation don't work anymore. s2disk saves image to disk and then it resumes it but computer stops on text message along the lines of "Resume completed successfully".
5. Changing volume with keyboard shotcuts no longer works.
6. Smplayer does not display picture anymore when playing movies. The view is just empty. I can only hear the soundtrack. It is using XV filter.
7. PCmanFM that used to worked flawlessly, now after going into 1 or 2 subdirectories stops reacting to clicks on file/folder list. Need to open new instance to be able to do anything and this again would become unusable after visiting 1-2 folders.
I just installed 10.4 Server, and dutifully did apt-get update;apt-get upgrade" after installation.
The upgrade hangs at "libc6". I get no keyboard response (not even Ctl-Alt-Del), and apparently no other response, either - pressing the power button doesn't even interrupt it! Usually press Power will interrupt whatever is going on and reboot the machine.
I just did the upgrade and I want to turn off the display after 30 minutes. I check that selection but the display does not turn off after 30 minutes. It is still on. I enabled this setting through the power management. The screen saver is on, go to blank display but the monitor does not turn off.
On Windows, dual boot on the same machine, the monitor does display off. I don't know if this is part of the problem or not, but when I go to "System -> Preferences", there are two different "Screensaver" options.
I just tried to upgrade from 10.04 to 10.10, but since update-manager did not show the upgrade button (for some reason it did not know that there was a new release?), I tried upgrading using sudo do-release-upgrade.This only worked partially though, and now when I run lsb_release -a it says that I am running maverick, but when I try to run update-manager, it says that the upgrade was only completed partially, and it suggests that I try to finish the upgrade, but it then gets the following error:"An upgrade from "maverick" to "lucid" is not supported with this tool"
View 7 Replies View RelatedI just tried installing another version of libc6 (2.10.2-6) with kpackage. It didn't work so I had a broken package on my system. I then wanted to fix it with synaptic package manager which then told me in order to remove it, I had to pretty much uninstall all of linux. I then tried installing the older version of libc6 (the one I'm supposed to have: 2.7-18lenny2). That gave me the error code
dpkg -i '///home/sam/torrents/libc6_2.7-18lenny2_i386.deb' ;echo RESULT=$?
dpkg: `ldconfig' not found on PATH.
dpkg: 1 expected program(s) not found on PATH.
NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
RESULT=2
I already checked my path and it was: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin (I found it with echo $PATH)
I guess my path is okay so the problem is in ldconfig but how can I get ldconfig in the path and where could it be now?
I need to downgrade glibc due to a broken kernel after a libc6 upgrade attempt. See:[URL]..Especially with the reduced capabilities I have right now (few if any programs are working), how might I go about downgrading glibc to 2.6?
View 1 Replies View RelatedWas wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
Since having installed Lucid Lynx, I have several complete system crashes a day, no matter which applications I am using. Lucid crashes without any error message and the system reboots. I have had no problem whatsoever with Karmic Koala (also switched from ext2 to ext4 when installing Lucid Lynx). Is there any probable reason for that or a workaround? Can I paste any logs here for anybody to figure out what might be going on? When I try XP which is also install, the system won't crash (so far...), so I don't think it's a hardware problem.
My system:
Mainboard: Gigabyte GA-MA78G-DS3H, AMD 780G, ATX
Processor: AMD Athlon64 X2 4800+ AM2 box "EE" 65W, 2x512kB
Coolermaster Centurion5 Schw. CAC-T05-UW ohne Netzteil
ATX BE Quiet! Straight Power 400 Watt / BQT E5
2x2048MB DDR2 Aeneon PC6400 CL 5, PC6400/800
DVD: LG GH20N bare schwarz (SATA-II)
HDD: Seagate Barracuda 7200.11 500GB SATA II ST3500320AS
Does anyone know where I can find the complete VirtualBox .deb file for Lucid? That is the one that doesn't need an Internet connection to install VirtualBox.
I downloaded the .deb available from virtualbox.org but, when I copied it to a desktop I have without Internet connection I can't install it because it looks for a connection to the repositories.
I'm not sure if this is the right place for this. I'm not sure which veraion of linux I have but it was the latest veraon bfor the recent update. I accidentally hit alt ctrl f11 and my comp went inyo the grub menu. I've tried startx and it does nothing. About half the commands I enter do nothing and the other half r not found or are incorrect. The only vommand thw actualley work is reboot. I searched for this and read a grub guide but it did no good.
View 4 Replies View Relatedis there anyway to get zenity 2.32.0 installed on lucid besides compiling it from source? because i noticed it was available for maverick.
is this version likely to be available for lucid?
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
my system proposed an upgrade to 10.04. this morning it seemed to complete, restarted itself. it gets to the UBUNTU logo, shows "Starting Up" and then.... nothing. it just hangs with a blank screen. when I've faced a crapped out upgrade before on another machine I had to reinstall from an old 9.04 CD and then upgrade again.
when I start that process at the Partitioner it is showing me that "Ununtu 10.04 is installed" and asks if I want to replace it with 9.04 I would like to avoid the downtime of that reinstall and reupgrade process. is there anything I can do at this point to revitalize my 10.04? (and in general, is this a fairly common problem? crapped out upgrades? in my 2-years of using Ubuntu this is the 2nd time I've faced a failed upgrade.)
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies View RelatedI am using 10.04 how can I upgrade to 10.10 ?
View 3 Replies View Relatedi tried update-manager -d from GUI and asked to downlaod 678 MB...so i downlaoded the i386 iso 685 from cdimage.ubuntu.com/alpha-3..now how to upgrade to 10.04 lucid alpha 3 from 9.10.
View 1 Replies View RelatedI'm currently upgrading my laptop, and it has completed the step "Getting new packages", and is now onto "Installing the upgrades".It says it is going to take another 2.5 hours, but I am leaving work soon and want to take the laptop with me. Is it safe to disconnect it from the internet at this point? I don't want to fudge up the install, but I don't want to have to leave my laptop at work all weekend (or have to come back and pick it up at some point).
View 3 Replies View RelatedI upgraded successfully last night from Hardy Heron to Lucid Lynx, but have no sound now. After searching around I can see that this is a fairly common problem. But none of the proposed solutions that work for other people have yet worked for me.
If I type 'alsamixer' at the command line, everything looks fine. There are no 'MM's indicating something being muted. I tried removing and reinstalling alsamixer and pulseaudio with no success. Edited lines 45 and 46 of /etc/pulse/default.pa with no luck.
I have a dual boot system with Win XP and Ubuntu (using grub boot menu). I recently upgraded my Ubuntu from 9.04 (Jaunty) to 10.04 (Lucid) and now I cannot boot into Ubuntu - I just get a desktop with no icons or disk activity. I think this may have something to do with the fact that I answered 'no' when asked whether to replace my menu.1st file, and possibly some others. So my boot menu still refers to 9.04.
View 9 Replies View Relatedcannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor.
Below is the results I get from a boot info script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub.
[Code]....
Upgraded x86 Karmic (which had OpenOffice.org 3.1) to Lucid via the Alternate CD. Why was OpenOffice.org not upgraded to 3.2?
View 2 Replies View RelatedI can't upgrade from Karmic to Lucid,If I try to use the update manager I get a message that says "Can't download release notes. Check your Internet connection". I've tried changing the repository and I get the same message, but I can log in to the Internet, and download and install any program from the repository. I also get regular updates for Karmic so the repository is fine.I tried the command line
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando �rbol de dependencias
[code]...
I wonder if others have upgraded their Lucid kernel using the deb [URL]..repository. I have been using the repository for some time now without any apparent problems, and have gone from 2.6.36-1, through 2.6.37-10, and am now on 2.6.37-12.
All of these seem to work with no problems at all, but I am just wondering if other users can also report success, or if there are any trip-ups that might occur. I still keep updating the "standard" kernel from the main repos, ie 2.6.32-27, so I have that as a backup, but I'm just very curious about other people's findings.
I read recently about security flaws in the ubuntu kernel, and when I checked my kernel, it is 2.6.32-29-generic. I looked in synaptic, and I have the linux-generic meta-package - which should ensure upgrade to the latest kernel, and yet this is not being updated when I run update manager. There is a linux-image-2.6.35-25-generic, but the advice is not to install this directly (to avoid breaking dependencies, etc.), but to install the meta-package instead. Yet, the meta-package doesn't seem to be doing what is should do.
View 9 Replies View RelatedI installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....