I've just attempted a distro upgrade (to 9.10) and have been left with a machine in an unbootable state.
I tried using a recovery boot through Grub and can see that the boot process hangs after outputting:
Code:
If I ESC to get a prompt, I get:
Code:
I can't run dpkg-reconfigure as I get a read-only filesystem error.
I've just attempted a distro upgrade (to 9.10) and have been left with a machine in an unbootable state.
I tried using a recovery boot through Grub and can see that the boot process hangs after outputting:
Code:
swap: waiting for UUID=$random-string$
If I ESC to get a prompt, I get:
Code:
General error mounting filesystems
I can't run dpkg-reconfigure as I get a read-only filesystem error.
I've recently bought a Toshiba Satellite C650 with the following system configuration: 3 GB DDR3 Memory, a DualCore Intel Core i3 at 2266 MHz, 320 GB, 5400 RPM, SATA-II Hard Disk and an integrated Intel(R) HD Graphics video card.
I tried at first to install Ubuntu 10.10 through Wubi. That didn't seem to work, as my laptop froze at the moment where all the numbers and letters appear and my hardware is checked (I'm kind of new to this, sorry). A restart was needed. Next, I tried to boot the same distro with a USB Live stick. The same thing happened again.
At first I thought that the iso file was guilty for this, but then I tried a bunch of other Linux distros such as Fedora, Mandriva, EasyPeasy, Puppy, Sugar on a Stick and Slax. I even burnt a Slax Live CD. Nothing changed. I read somewhere that there are video cards that aren't compatible with Linux. Someone recommended me to update my drivers. After I did that, I tried again but without any luck. Another tip was to mess a bit in bios at my hard disk in order to change something from ahci to compatibility. That didn't work either.
I really don't know what to do.
I think the title says it all really - I've installed Mint onto a Acer aspire 5315 laptop. Its a dual boot system using Vista Basic. Grub works perfectly and to be honest Mint is great. really enjoying playing and learning. My problem is that the laptop overheats when using Mint - the cpu fan doesn't cut in and the laptop shuts down to protect the system. According to a swift google this seems to occur with mint (possibly particularly with Acer's) and maybe with other distro's too. However I'd like to keep trying to see if i can find one that works.
So my rather obvious newbie question is can I just get another distro dvd and install this onto the partition containing mint thus deleting the previous install? If I did this would Grub show the new distro ok or would it keep searching for Mint. I have a back up so if all else fails I can reinstall everything but that will have to wait till I get home
I just finished upgrading from 10.10 to 11.04 and restarted my system. It had been working fine, but now, after the POST test, the screen goes black, then a box floats around the monitor saying "Input Not Support." Pressing CTRL+ALT+DEL reboots the system to the POST screen, then the same thing happens. No hard drive activity, no boot, nothing. I really don't want to lose everything on my hard drive with a fresh install.
My system, a Compaq Presario, has diagnostics, so I ran that at startup, and it says I have no active partitions.
I have dual boot (wubi) Windows XP. It was working smooth until I upgrade ubuntu 9.10. At the boot screen I choose Ubuntu, then it ask me wich version, then it freeze. I tried the recovery version, but then it ask me for a user ID login and password. At this point I'm able to enter the user , but it don't type anything on the password and keep asking me to enter the user id and password again, and again.
View 2 Replies View RelatedI have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies View RelatedIn the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies View RelatedI just recently installed updates from Ubuntu and the system is hosed. I get the Ubuntu screen that flashes real quick then it goes to the Nvidia like cursor. I am pretty sure something is hanging up on startup. I cannot get to a console, cannot do anything but reboot with ctrl alt del. Then I get the briefest flash of the screen but not long enough to see where it was hanging up at. I ran the same updates on this machine, if I could get the old school informitive startup screen instead of the windows like tell you nothing start up screen I might at least know where to start looking. Right now I have zero clue as to what the updates broke. I cannot even get to log files as there's no console, no ssh, nothing. version is Ubunto 10.4 LTS.
View 4 Replies View RelatedI've just upgraded to Natty. During the upgrade no errors showed. However, when I now boot ubuntu (either recovery mode or normal), the boot process hangs at:
'checking battery state'
I searched for similair problems in this forum, but the solutions in other posts(sudo apt-get update & upgrade etc.) did not help. I'm not sure if it is related or important, but when it hangs, it also shows something like:
'starting automatic crash reporter [fail]'
'not starting jetty'
'saned disabled'
(I can't copy there of course, so it is probably not exactly like this, or in this order...) What can I do to get my ubuntu boot again?
I use Debian testing for six months and I started used it six months ago. I use apt-get distupgrade for long times , but today after apt-get update and apt-get dist-upgrade , my system reboot and can not boot and I see URL...and system can not , I see this errors after grub
View 14 Replies View RelatedI upgraded from F10 to F12 using preupgrade. The upgrade itself completed with no errors, but I'm unable to boot afterward.
Symptoms:...Grub starts, the initramfs loads, and the system begins to boot. After a few seconds I get error messages for buffer i/o errors on blocks 0-3 on certain dm devices (usually dm0 and dm2, but I can't get a shell to figure out what those are). An error appears from device-mapper that it couldn't read an LVM snapshot's metadata. I get the message to press "I" for interactive startup. UDEV loads and the system tries to mount all filesystems. Errors appear stating that it couldn't mount various LVM partitions. Startup fails due to the mount failure, the system reboots, and the steps repeat.
Troubleshooting done:...I have tried to run preupgrade again (the entry is still in my grub.conf file). The upgrade environment boots, but it fails to find the LVM devices and gives me a question to name my machine just like for a fresh install. I also tried booting from the full install DVD, but I get the same effect. Suspecting that the XFS drivers weren't being included, I have run dracut to create a new initramfs, making sure the XFS module was included. I have loaded the preupgrade environment and stopped at the initial GUI splash screen to get to a shell prompt. From there I can successfully assemble the raid arrays, activate the volume group, and mount all volumes -- all my data is still intact (yay!). I've run lvdisplay to check the LVM volumes, and most (all?) appear to have different UUIDs than what was in /etc/fstab before the upgrade -- not sure if preupgrade or a new LVM package somehow changed the UUIDs. I have modified my root partition's /etc/fstab to try calling the LVM volumes by name instead of UUID, but the problem persists (I also make sure to update the initramfs as well). From the device-mapper and I/O errors above, I suspect that either RAID or LVM aren't starting up properly, especially since prior OS upgrades had problems recognizing RAID/LVM combinations (it happened so regularly that I wrote a script so I could do a mkinitrd with the proper options running under SystemRescueCD with each upgrade).
I have tried booting with combinations of the rootfstype, rdinfo, rdshell, and rdinitdebug parameters, but the error happens so early in the startup process that the messages quickly scroll by and I just end up rebooting.
System details:4 1-TB drives set up in two RAID 1 pairs. FAT32 /boot partition RAIDed on the first drive pair. Two LVM partitions -- one RAIDed on the second drive pair and one on the remainder of the first drive pair. Root and other filesystems are in LVM; most (including /) are formatted in XFS.
I've made some progress in diagnosing the issue. The failure is happening because the third RAID array (md2) isn't being assembled at startup. That array contains the second physical volume in the LVM volume group, so if it doesn't start then several mount points can't be found.
The RAID array is listed in my /etc/mdadm.conf file and identified by its UUID but the Fedora 12 installer won't detect it by default. Booting the DVD in rescue mode does allow the filesystems to be detected and mounted, but the RAID device is set to be /dev/md127 instead of /dev/md2.
The arrays are on an MSI P35 motherboard (Intel ICH9R SATA chipset) but I'm using LInux software RAID. The motherboard is configured for AHCI only. This all worked correctly in Fedora 10.
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies View RelatedI had a machine that dual-booted Windows 7 and Ubuntu 9.10. This past weekend I thought I'd upgrade to 10.04. I obviously selected the utterly wrong set of selections when prompted during installation to pick partitions for GRUB2 to manage. I am sorry I can't say what I picked, but I can tell you the results:
* Ubuntu 10.04 boots fine
* Windows 7 just blinks with a flashing cursor in the upper left
* I do have my Win 7 install disc and used the "repair" option and the command line commands, but the repair disc does NOT see any valid Windows partitions... no C:, nothing. I can't run the various repair options I've seen online because there's nothing to run it on.
* I can see the Windows partition when booted under Ubuntu... all the data is still apparently there.
* I've seen various threads about restarting with the LiveCD and re-running GRUB2 but am not sure I've seen a definitive page on how to re-run GRUB2 and what to select once I've done so.
I would be happy to get both Win 7 and Ubuntu bootable, but barring that, I would like to get Win 7 back with everything intact. If the easiest path forward is to reformat and reinstall Win 7, that's less fine but doable -- I've backed up what I can via Ubuntu to an external drive.
A few days ago I upgraded my debian sid system, and since then systemd does a filesystem check on every boot which takes over two minutes, disobeying the existing settings I had. How can I set systemd to do a filesystem check only once every a set number of mounts, like I had set up before the upgrade?
View 5 Replies View RelatedI am on debian jessie. I ran "apt-get update && apt-get upgrade" and midway through the upgrade my computer suddenly rebooted.
I wasn't paying close attention to the upgrade process so I didnt see if there was any error messages right before the reboot. The laptop was plugged in, fully charged and I've never had issues with overheating.
When I boot now I get to a shell with a message that says:
Code: Select allWelcome to emergency mode. After logging in type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" to try again to boot into default mode.
If I try "systemctl default" there's a message that simply says "Hangup", nothing else happens.
Looking through "journalctl -xb" I see this:
Code: Select allFailed to insert module 'autofs4'
Failed to open /dev/autofs: No such file or directory
Failed to initialize automounter: No such file or directory
Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
Failed to start Load Kernel Modules.
If I retry "apt-get upgrade" it says:
Code: Select alldpkg was interrupted, you must maually run dpkg --configure -a to correct the problem
If I run "dpkg --configure -a" stops at the package cups-browsed with message saying "Hangup"
Output of a few commands I saw in another forum thread:
$ lsmod
Code: Select allModule Size Used by
ext4 473802 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 82522 1 ext4
[Code] ....
Is this fixable without jumping through too many hoops or should I just reinstall the system? I need the computer for work so Im not gonna spend days trying to fix it without reinstalling.
I upgraded Netbook edition from Lucid to Maverick, and it's gone horribly wrong. It may be because I had set up the a Gnome session in Lucid so that I could add and remove applets to panel in while still having the netbook session layout.
After distro upgrade I ended up with a hybrid system with both the unity launcher AND the Lucid-style UNE launcher. Unity does not recognise any of my installed software, e.g open office or bibus in "Office". UNE launcher does. There is also no option of Gnome session at login, only Desktop and Netbook!
[Code]...
So I finally said screw it to the last problem I had with my ubuntu a few days ago, where it was trying to upgrade to a brick. I went in, backed up my Home, var, etc, and usr folders to my external harddrive, then formatted the partition and threw ubuntu in there.
Anyways, I just have a quick question, Since I just installed it, which one would be better to do first?
Apt-get upgrade or Apt-get dist-upgrade
I have 0MB left on my Wubi disk. How do I enlarge the virtual partition for Wubi if I don't have enough space to install anything?
View 7 Replies View RelatedI tried to upgrade to v10.04 ("Lucid"). After nearly 15 hours of painfully slow downloading and installing, my computer froze, just as the upgrade was almost complete. Needless to say, my Linux kernel is now wasted. what is the best way to proceed? I would like to get theOS going again, without losing any of my data or files. I also have a Windoze partition on that HD, which needs to be preserved.
View 9 Replies View RelatedMy distribution upgrade got interrupted in a hard way and when I start the computer I get some errors:
Code:
kernel panic - not syncing: VFS: unable to mount root on block 0, 0
or sth like this and a few more errors. Can't look the exact message as I am writing from the liveCD. On Gparted the boot looks normal and it is said that it's mounted but there is no mount point. There are things on the hard drive that I must save.
Now, every time I run update manager, it tells me to run a partial upgrade. I can close the window and proceed upgrading packages,but if I let it try the partial upgrade is starts a distribution upgrade !??! I am currently running 11.04.
How can I stop update manager from trying to update my distro version?
so my update manager keeps saying I have updated everything, but it won't show the new 11.04 release. I did everything the documentation says, including change the release upgrade file so its pointed to normal distro upgrades.
View 3 Replies View RelatedSuffice to say I had a dual boot at work with an essential windows 7 and non-essential linux install on it, and randomly upgrading the distro made windows7 unbootable. Cue a missed days work, much embarrassment and ear bashing from those who are convinced Linux is written entirely by communists and hippies. In the end I had to re-install windows, which cut off the ability to boot to ubuntu - although I've left the existing ubuntu partitions as they were.
Although I can get away with allocating a few partitions to ubuntu, I can't really justify fiddling with the MBR based upon this experience. I need a fast boot and persistent data for doing anything further with ubuntu at work, so I'm wondering whether a safer bet would be to setup a usb stick with enough grub to boot to the existing ubuntu install? Not a full usb distribution, just enough to boot into the existing install? how this would be doneIs it really just a grub-install /dev/sdXX (where XX is the usb)?
Getting sound to work in Linux has been nearly impossible since I upgraded from Ubuntu Jaunty to Karmic. I finally had it working for about 6 months in Fedora 12, then I upgraded to 14. </rant> When I install pulse, I can hear the login sound on KDE, and the KDE error sounds, and that's it. I can't even hear sounds from the test button in the Phonon settings.With ALSA alone,I get absolutely nothing. I've already been through this which was minimal help.
Here's the output from alsa-info: [URL]
Pretty soon, I hope, I'll get my brand new PC and wish to install a Linux disto. on it. openSuse may be it But I read recently that people prefer to do a fresh install of a newer version of openSuse, instead of upgrading it, apparently because of problems that may occur by the upgrade. As I understand, this preference apply to all Linux distributions and not only openSuse. Thus I wonder if there's a Linux distro. that's best in handling upgrades?I don't want to make a fresh new install each and every time that my disro. has a new version. I'm afraid to lose the data in that installation, and backing-up the data would be a headache. Also I plan to install a Windows OS alongside the Linux one via the Dual Boot configuration.
View 14 Replies View RelatedI just wanted to know which is best distro of linux...
And in particular which version of ultimate edition of ubuntu involves
almost all features....
