I just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
View 9 RepliesI've been using 10.04 for a while now with no problems but for some reason it started freezing on the splash screen, 2 of my keyboards lights start blinking and thats it, I've tried with recovery mode and no luck either. The thing is I don't remember doing anything wrong.
View 3 Replies View RelatedI did a fresh install of 11.04 a week ago and I had my screen saver set to run 'Floating Feet' after 15 minutes idle time. Twice I've left my computer, and returned, clicked the mouse, and found my computer frozen on the screen saver. I was able to recover once by hitting the power button, which brought up the shut down/restart options and normal desktop. It hasn't happened since I turned off the screen saver, so I'll just leave it that way until a solution arises.
View 4 Replies View RelatedWhen I startup Firefox Fedora's screen freezes. The only way to restore is to power off and on!
I've tried yum remove/install but the problem persists.
Anyone know a solution?
I just tried to upgrade from ubuntu 10.10 to 11.04 (64bit). Everything went fine until the machine tried to reboot. Now it stops while booting on the screen where the ubuntu logo and five red dots appear. I'm unable to open a terminal (alt+ctrl+f1 does not result in anything) and the only thing I've been able to do is to reboot the machine.
If I reboot by pressing ctrl+alt+delte I see some information for a short while, it seems that the boot stops on "checking battery state" I've googled this, and it seems that quite a few other have had the same problem, but they have been able to open a terminal, any ideas on how I can do this? Or any other suggestions on how to fix this?
My system is a dekstop with a Nvidia GTX 260 graphics card. I recently installed the newest Nvidia driver. I forgot to mention that I did an online upgrade.
For some reason my disc I burned for ubuntu desktop 10.10 freezes when I get to the ubuntu logo with the 5 dots. I am able to install ubuntu server just fine.
I tried to install desktop on top of server using sudo aptitude install ubuntu-desktop and then whenever I reboot it freezes during startup.
I think it might be my swap partition. I recall seeing a blip of an error talking about "press C to skip or M to start maintenence" or something like that. It never stayed on the screen long enough for me to read it.
I dual booted my windows 7 with Ubunto 10.04 and it said it successfully installed. I booted the ubuntu and it freezes on th Ubuntu image with the message( i didn't copy the message). i rebooted and freezes again on an image after the Ubuntu Image.So itried recovery mode and it worked. i always use recovery mode to use ubuntu.
View 1 Replies View Relatedconfigure: error: either specify a valid zlib installation with --with-zlib=DIR or disable zlib usage with --without-zlib
The above code is generated after I configure httrack.
After upgrading to 11.04 from 10.10 they were there, but now I see no panel, no menu. Just desktop with icons with 1200 screen resolution. I can change keyboard with shortcut. No other shortcuts working.
View 1 Replies View Relatedi am using amd64 ubuntu karmic.. i am trying to install ns3 in it however once i start the build process..both the CPU are utilised to a 100 percent and after around building 1010 files out of 1050 the machine just powers off i tried doing a memtest..the same thing is happenin over there also..the machine simply powers down before completing the test..
View 2 Replies View RelatedI tried to install ubuntu 9.10 with the live cd, but my computer freezes on the welcome screen, where you select the language (for the second time).After that the ubuntu logo starts pulsing and after a while the welcome screen appears. At this point, my mouse and keyboard are frozen (though the laser is still working) and the only way is to turn my computer off. I can't even eject the cd rom.
View 6 Replies View RelatedI recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies View RelatedToday I upgrade my Ubuntu 9.10 pc to the latest Ubuntu 10.04 LTS. The upgrade went perfectly with no errors. But when I login to my account Ubuntu loads but then the screen freezes and nohing happens. Then I am just left with a blank desktop with only the Ubuntu 10.04 background and no panels.
View 2 Replies View RelatedI upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
Yesterday I upgraded from 9.10 to 10.04 (32 bit). Everything seemed to go well with no errors until the point where the system needed to restart at the end. After it restarted (and every power cycle since), it gets to the "ubuntu" screen with the moving cycle of square dots underneath, and stays there for ever. The screen resolution is absolutely goofed up, the word Ubuntu cannot be clearly read (looks like it is way overdriving the monitor). All letters seem to have like vertical bars on either side.
Below the Ubuntu and the dots, there appears to be two lines of completely illegible text (they just look like multicolored boxes about the size of characters.
I tried using the shift key to get to grub and try to boot into recovery mode--no luck. I tried using grub to boot to the previous kernel--no luck. It just sits there at the Ubuntu screen with this weird resolution/appearance.
I can boot from the Live CD and things work fine. I can see the file system, grub files etc. Any help debugging this would be most useful.
I've been using Ubuntu 11.04 for some time now and I'm experiencing many severe bugs. One of this is very bothering and I still can't find a solution. I experienced many problems maybe related to this, but seems to have gone away by downgrading xserver-xorg-video-ati. Still anyway, when in dual screen, after some time, the screen completely freezes. The system is completely freezed, I can't even go to a shell, but I noticed it is possible to log in via ssh.
I've never had problems with ATI opensource drivers. Now I even noticed a logout problem anyway (which is known as far as I know). Is there anyone else experiencing the same? I found some others complaining about something similar, but not exactly the same and still no solution. Is it possible to somehow debug this when it happens? I have to note that I'm still using kernel version 2.6.35 because the new 2.6.38 is not booting at all. But I don't know whether this is the problem or not.
1GB Dane-Elec stick is what I'm using.
The only thing out of the ordinary I noticed is that when I clicked "Erase disk" I ended up with a choice of two: /dev/sdc (with no indication of free space but a capacity of 983.0MB), and /dev/sdc1 which showed 288MB free before I erased it and a capacity of 980.4MB.
This app has never worked on any system I've tried it on, but this particular machine is an LTS (10.04) with recent hardware so I'd like to get it fixed if possible.
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies View RelatedI just dusted off my old Compaq Prezeio 900Z. Unfortunately, when I try to install Ubuntu, it screen freezes on me and the computer restarts.
View 9 Replies View RelatedOk, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View RelatedAcer desktop m3641
mcp73 (the motherboard?)
Intel pentium dual cpu e2200
ram 2gb
hdd 300gb
The only os is debian and there is plenty of space on the hdd.
Symptoms: When I click on something, say Evolution or Empathy or Maps, about 1 in 5 times the screen will freeze and I have to switch the computer off and on again.
I had this problem with Wheezy and could not resolve it. In the past week I have installed Jessie 32bit and then Jessie 64bit and I get the same problem.
On downloading my copies of Jessie I have verified the md5 and sha.
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies View RelatedI start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
View 4 Replies View RelatedI have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
I have a Lenovo Thinkpad T520 laptop with Nvidia NVS 4200m Graphics card. I installed Ubuntu 11.04.
Before I installed Ubuntu 11.04 I had went to my bios and disabled Nvidia Optiums and changed the graphics to Discrete Graphics. Then inserted my Ubuntu 11.04 CD and installed.
With this I had gotten unity to work. However when I pull the power cable from the laptop my screen freezes. Also if press "FN"+ Home or END to change the brightness of the screen my screen freezes and no longer able to move the mouse or press anything on keyboard.
Did anyone ever run into this problem and or fix this issue? I can get the graphics working properly with Ubuntu 11.04 with Unity with a Nvidia NVS 4200m graphics card.
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies View RelatedI've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz)
512MB RAM
40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
After updating ubuntu 10.04 a few days back, I get a black screen at startup without a flashing cursor or anything. I'm kind of new to ubuntu but not completely.
System specs:
Processor: q6600
Graphicscard: xfx nvidia gforce 9800gtx+
Motherboard:asus p5ql pro
2 HD's 320gb and 250gb
I'm dual booting with windows 7.