I dual booted my windows 7 with Ubunto 10.04 and it said it successfully installed. I booted the ubuntu and it freezes on th Ubuntu image with the message( i didn't copy the message). i rebooted and freezes again on an image after the Ubuntu Image.So itried recovery mode and it worked. i always use recovery mode to use ubuntu.
View 1 RepliesI just tried to upgrade from ubuntu 10.10 to 11.04 (64bit). Everything went fine until the machine tried to reboot. Now it stops while booting on the screen where the ubuntu logo and five red dots appear. I'm unable to open a terminal (alt+ctrl+f1 does not result in anything) and the only thing I've been able to do is to reboot the machine.
If I reboot by pressing ctrl+alt+delte I see some information for a short while, it seems that the boot stops on "checking battery state" I've googled this, and it seems that quite a few other have had the same problem, but they have been able to open a terminal, any ideas on how I can do this? Or any other suggestions on how to fix this?
My system is a dekstop with a Nvidia GTX 260 graphics card. I recently installed the newest Nvidia driver. I forgot to mention that I did an online upgrade.
I just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
View 9 Replies View RelatedFor some reason my disc I burned for ubuntu desktop 10.10 freezes when I get to the ubuntu logo with the 5 dots. I am able to install ubuntu server just fine.
I tried to install desktop on top of server using sudo aptitude install ubuntu-desktop and then whenever I reboot it freezes during startup.
I think it might be my swap partition. I recall seeing a blip of an error talking about "press C to skip or M to start maintenence" or something like that. It never stayed on the screen long enough for me to read it.
1GB Dane-Elec stick is what I'm using.
The only thing out of the ordinary I noticed is that when I clicked "Erase disk" I ended up with a choice of two: /dev/sdc (with no indication of free space but a capacity of 983.0MB), and /dev/sdc1 which showed 288MB free before I erased it and a capacity of 980.4MB.
This app has never worked on any system I've tried it on, but this particular machine is an LTS (10.04) with recent hardware so I'd like to get it fixed if possible.
I am a brand new ubuntu user, heard lots of good things about it so thought I would give it a go on my laptop. However, I have tried installations of Ubuntu 10.04 (notebook version) and Xubuntu. Yet on both attempts to install the OS it has stalled at the "Setting up the clock" dialogue box, it just sits at 0% and remains frozen (mouse still moves etc but nothing happens).
I really want to give Ubuntu / Xubuntu a go and my forum trawling has brought nothing to light so far.
I am having difficulty installing Ubuntu on a new PC. Hardware is thus:MB: ASUS M4N68T-MCPU AMD Phenom II 3.2 GHzMem: Kingston 2GB DDR3-1800HDD: Seagate Barracuda 80 GB SATAvideo is on-board, cannot find the details regarding chipset.I have tried both 7.10 and 10.10 (would prefer to use 7.10) but both versions hang at the same point during installation.Live mode works fine on both versions.Tried burning 7.10 to CD at 4x write speed.Set MB bios "Plug and Play OS" to yes.When it hangs, the mouse freezes, then the video wigs out (think Van Gogh on acid) and only a hard power down will un-freeze it.
View 4 Replies View RelatedI'm a complete noob trying to install Ubuntu Server 10.10 on my first build for use as a file/media server.When I get to the step to partition the drives, the installation freezes. The screen says "Starting disk partitioner" and the progress bar stops at 45%. It has done this three times now, and the longest I waited for it before rebooting was over an hour.I am installing from a flash drive containing the .iso file, and I have the following hardware (in case that matters): asus p7h55-m pro mobo, core i3-540 CPU, 2x4GB ram, WD caviar green 1.5TB, WD caviar green 1TB, and Kingston 8GB SSD.
View 6 Replies View RelatedI have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies View RelatedI'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies View RelatedI'm new to the Debian, but not to Linux. I've previously used Ubuntu for a few years, so I know something about how a successful installation should look like. I'm currently using Windows 7.
I downloaded the debian-6.0.3-amd64-gnome-netinst.iso from [URL] ...., and then made a USB pendrive using the Windows version of Unetbootin. The MD5 sum for the .iso-file was the correct one, b663727d7f5b572c329cea8e2ff5e29c.
I used the usual non-graphical setup, without any special options. The installation process went without hiccups until the "Starting up the partitioner" -screen freezes at "Scanning disks...". The bar stops at 50%. It never progresses any farther, even after an hour. It doesn't give any errors either. After I pressed Alt+F4, the last lines were:
Code: Select allpartman: No matching physical volumes found
partman: No volume groups found
partman: Reading all physical volumes. This may take a while...
partman-lvm: No volumegroups found
Exactly the same happens with firmware-6.0.3-amd64-netinst.iso too, or any of the live versions I tried. The result of graphical installation was also nothing. The USB pendrive created by LinuxLive USB Creator was nonoperative in exactly the same way.
The computer is brand new, without any previous OS installations. My desktop computer has the following parts:
CPU: AMD Phenom II X6 1055T, AM3, 2.8 GHz (HDT55TFBGRBOX)
Motherboard: Gigabyte GA-970A-UD3, AM3+, AMD 970, DDR3, ATX
Videocard: Gigabyte GT 430
Memory: Kingston 2x2 GB, DDR3 1066MHz, CL7 (KVR1066D3N7K2/4G)
Harddrive: Samsung Spinpoint F3 HD103SJ
Powersupply: OCZ 600W ModXstream, ATX 2.2, (OCZ600MXSP-EU)
As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
View 7 Replies View RelatedMy problem is that every time I try to install a version of Linux, my PC freezes(before or after creating the partitions) and just stops installing. I can't move the mouse cursor and that's it. This problem occured in trying to install Ubuntu and Fedora from cd and usb.
View 9 Replies View RelatedI have an old laptop (BTW, it uses Plop Boot Manager to boot from the USB, is that important?) and I installed Lubuntu perfectly. With the same USB, it won't work on my new one. It always freezes after I come to this screen (although it says Lubuntu, not Ubuntu):
I have tried two methods of burning a Live USB (copy/paste ISO files and UNETBootin).
I've been having problems with Ubuntu/Kubuntu (I switch back and forth) freezing shortly after booting and logging in. I installed 9.10 a few days ago (fresh install, new hard drive). I installed all of my packages, and everything works fine except this freezing bug.
If there is not a freeze within a few minutes after startup, then there so far has not been a freeze at all (so, if everything is fine after a short time, then everything will continue to be fine). I'll try to add some information here that will be helpful: I dual boot with Windows 7, which is installed on sda1. Ubuntu is on sdb. There doesn't seem to be any problems with this. I have an Nvidia 9800 GTX+ graphics card (I use the proprietary driver). 8 GB Ram, Intel quad 2.66 CPU.
I've been using 10.04 for a while now with no problems but for some reason it started freezing on the splash screen, 2 of my keyboards lights start blinking and thats it, I've tried with recovery mode and no luck either. The thing is I don't remember doing anything wrong.
View 3 Replies View RelatedI was running update manager in ubuntu and my system froze completely. I had no other option but to manually switch of the PC. Then after restarting the PC I got some error lines but I can't remember what they said. It didn't matter which linux version I chose from GRUB, nothing worked. Today when starting up shortly after the Ubuntu 10.10 screen with the blinking dots below it I see a dos type screen with only a flashing cursor and nothing happens.
Is there any way I can fix this? Or repair the ubuntu installation without loosing all my data/settings etc? I'm running now from the live CD. I can access the disk drive that has ubuntu installed on it. I have XP running on a separate disk and I can boot into XP from my motherboard's bios boot menu.
I have used a few versions of ubuntu now and each one seems to encounter the same problem loading ubuntu.
I am using a Samsung x05 laptop.
If I have a mouse, printer or even wired internet connection plugged in at any point during startup I will not be able to get past the login screen. I can login fine but the system freezes at the beige screen before the desktop appears.
I recently partitioned and installed Windows xp, which doesn't have the same problem, so I presume it is some kind of incompatibility between Ubuntu and my laptop?
I am trying to install Xubuntu on a old toshiba satellite A55. I threw in the live CD and did the try without any changes to your computer. The starts to load, when it finishes loading, and I can finally start poking around it freezes right away. When it freezes the graphics get a bit messed up, little ghost images next to their actual image appear (like a second icon of the same thing slightly offset, and blue/white) I had the same problem with Mint. Only thing I have been able to get running is puppy linux.
Laptop info:
Celeron M CPU
roughly 750mb ram
ata-100 western digital drive
Toshiba Satellite A55-S3062
Everything was starting up fine, then a few times it would freeze during boot, now every time it freezes during the boot. I removed quiet, and added nosplash to the grub startup option, and I see that where it waiting is on a line that says: scsi4 : mvsas There is no disk activity at this time, and it'll sit there forever.
View 2 Replies View RelatedI did a fresh install of 11.04 a week ago and I had my screen saver set to run 'Floating Feet' after 15 minutes idle time. Twice I've left my computer, and returned, clicked the mouse, and found my computer frozen on the screen saver. I was able to recover once by hitting the power button, which brought up the shut down/restart options and normal desktop. It hasn't happened since I turned off the screen saver, so I'll just leave it that way until a solution arises.
View 4 Replies View RelatedI was trying to automount a few NTFS partitions last night. Upon reboot, I got the following error messages.
/device/sda2 ... is not ready or present
/device/sdc2 ... is not ready or present
Then Ubuntu just freezes. I am using Ubuntu Natty, if that helps. I am currently unable to get into Ubuntu without a LiveCD.
I have attempted Ubuntu, Debian, and Wuby, and none of them work so the problem is not a simple Cd drive error. Ubuntu and Debian freeze at roughly the same point in the installation. Wuby installs succesfully in Windows, but then dies in attempted startup. Ubuntu won't even boot from the CD. I have tried the various "safe" installers, text only methods, none work. Strangely enough, I have managed to get Knoppix to boot from DVD. I would prefer to get Ubuntu running than Knoppix however.
View 3 Replies View RelatedI have a problem with Kontak (PIM). When it starts it freezes with the "tip of day " showing and i cant close or cancel the tip of day or disable it.The program does not respond to any mouse inputs.I am running opensuse 11.3 KDE All other programs work if started individually.
View 1 Replies View Relatedi got an pclinuxos LXDE version on my netbook. i installed abiword on it. after that, synaptic and any other package manager refuses. synaptic freezes as soon as i start it up. only a reboot will close it. i searched google, found this: [URL]. i don't understand the instruction there, but it seems to be the same problem i had. i believe they suggest reinstalling. this is a mission-critical-workstation, i can't afford an downtime more then 1 day. so i can't do a re-install. (duo settings i have to apply again, this would take long)
View 2 Replies View RelatedI installed debian 7 lxde from lxde cd. It freezes on logging in (i.e keyboard doesn't work,desktop freezes and only mouse pointer works.But,I can't select or view anything.Only mouse pointer can be moved.).
But,If I do not login with the display manager and login (my username and not root) via another terminal like tty3 or tty4 using alt+ctrl+F3 or F4,everything works fine.
I installed OpenSUSE 11.3 a few weeks ago. It freezes 10 - 15 seconds after startup. I got a brief, but incomplete reply to what I thought was another related problem on the forum (OpenSUSE 11.3 / Mozilla Firefox freezes upon moving the mouse), but it turns out that the problem is neither the mouse nor Firefox. It freezes without doing anything special.
View 9 Replies View RelatedEvery time I launch Firefox and go visiting some websites, I notice it freezes for about 10 seconds. Not always in the same websites, but it always happens sometime in the first 2 or 3 minutes of running. I can see the hard disk led is ON all the time the browser is hung.
My operating system is Linux and I don't currently have any extension/plugin installed here.
I have no form completion, no history and have no more than 20-30 bookmarks.
Has somebody noticed something similar, or know how can I debug this to find out what Firefox is doing or trying to do?
As the title say, I'm having this odd problem, consistently, if I disconnect the USB keyboard from the box, it hangs after initializing md0 (raid of 10 sata disks).. The cursor blinks, but it never gets further, I've had it hanging like that for a day (I started the box before I went to school, and when I got home, I found that it never booted completely)
If I connect the keyboard, the box boots fine..
I just installed Ubuntu 9.10 and at the login screen, if I click anywhere on the screen, the entire system freezes. I can't open up the terminal or anything at this point, I have to restart the computer.
This also happens when I use the live CD.
I've done apt-get update, dist-upgrade... no change. Not to mention, I can't get into xorg anymore to change the video driver to VESA (it's always had trouble in previous versions without the restricted nvidia drivers)