Ubuntu Installation :: Upgrade To 10.04 - Freezes On The Screen
Jul 19, 2010
Yesterday I upgraded from 9.10 to 10.04 (32 bit). Everything seemed to go well with no errors until the point where the system needed to restart at the end. After it restarted (and every power cycle since), it gets to the "ubuntu" screen with the moving cycle of square dots underneath, and stays there for ever. The screen resolution is absolutely goofed up, the word Ubuntu cannot be clearly read (looks like it is way overdriving the monitor). All letters seem to have like vertical bars on either side.
Below the Ubuntu and the dots, there appears to be two lines of completely illegible text (they just look like multicolored boxes about the size of characters.
I tried using the shift key to get to grub and try to boot into recovery mode--no luck. I tried using grub to boot to the previous kernel--no luck. It just sits there at the Ubuntu screen with this weird resolution/appearance.
I can boot from the Live CD and things work fine. I can see the file system, grub files etc. Any help debugging this would be most useful.
View 3 Replies
ADVERTISEMENT
May 28, 2010
Today I upgrade my Ubuntu 9.10 pc to the latest Ubuntu 10.04 LTS. The upgrade went perfectly with no errors. But when I login to my account Ubuntu loads but then the screen freezes and nohing happens. Then I am just left with a blank desktop with only the Ubuntu 10.04 background and no panels.
View 2 Replies
View Related
Mar 14, 2010
After successfully upgrading from 8.04 to 8.1 (where even my wireless worked for the first time) I got a system freeze when I tried to upgrade to 9.04.
I suspect the graphics driver but don't know how to upgrade without X running. After booting in generic mode (kernel 2.6.28-1 I can log in the shell but am lost without the GUI.
View 2 Replies
View Related
Dec 10, 2010
Today I decided to do the upgrade from 10.4 to 10.10. Unfortunately the upgrade has frozen for the last few hours (after it has completed ~60% of job)... The problem is with xorg, when I log through ssh to the computer I see the xorg process takes 30%. what I could try not to 'smash' the OS... I am not an expert. During the upgrade I have experienced only 1 error with no space left on the device (it exceeded the estimations) but I have freed additional 2GB and it continued for some time.
View 3 Replies
View Related
May 3, 2011
I just tried to upgrade from ubuntu 10.10 to 11.04 (64bit). Everything went fine until the machine tried to reboot. Now it stops while booting on the screen where the ubuntu logo and five red dots appear. I'm unable to open a terminal (alt+ctrl+f1 does not result in anything) and the only thing I've been able to do is to reboot the machine.
If I reboot by pressing ctrl+alt+delte I see some information for a short while, it seems that the boot stops on "checking battery state" I've googled this, and it seems that quite a few other have had the same problem, but they have been able to open a terminal, any ideas on how I can do this? Or any other suggestions on how to fix this?
My system is a dekstop with a Nvidia GTX 260 graphics card. I recently installed the newest Nvidia driver. I forgot to mention that I did an online upgrade.
View 8 Replies
View Related
May 24, 2011
Screenshot attached. System itself is fine as in i can move the window around, etc no problem but the upgrade itself just hangs. Left it for 20 mins with no progress.....
Anyone got any clue as to how to fix or a work around? I dont know if its related but I just upgraded from 10.4 to 10.10 and am now trying to upgrade to 11.4
View 2 Replies
View Related
May 24, 2011
Just wanted to upgrade my desktop computer and after the terminal shows:
Installling new version of config file /etc/apparmor.d/usr.sbin.cupsd ...cups start/running, process 7944
The display froye, mouse does not move any more, keyboard does nothing, no chance to escape into a text terminal. Nada. After rebooting the system I get a kernel panic. This is now second of two upgrades to 11.04 that failed, and I do not know how often upgrades failed previously, but rather often.
View 1 Replies
View Related
Jan 7, 2010
i have recently installed linux ubuntu and set it up, i was then promted to install updates (roughly 174). i did this, however once the updates had been downloaded, they continue to install then about halfway through it freezes, nothing happens and time does not fix this problem. I have restarted the laptop and 4 options appear, including recovery menu's, i have re-installed ubuntu as what i tried from that menu did not work.
View 2 Replies
View Related
Feb 23, 2010
I seem to have a small problem. Since september, i hooked up an old Acer laptop (with just 560 RAM and a 16 mib graphical card) to a computer screen, a keyboard and a mouse, so that i had an extra 'computer' for my mother to use. Old people prefer bigger screens to ponder upon.
But anyways, each time i want to update or upgrade the 9.04 Ubuntu distribution, it freezes. This is quite annoying since i really want it to upgrade to 9.10, for possible faster results.
View 4 Replies
View Related
Feb 5, 2011
I was running 10.04 with no problems. Upgraded. I may or may not have lost power before the upgrade was finished. Now my system locks out the keyboard and mouse on the login screen...nocapslock light or anything, but I know it's still running because the clock at the bottom increments once per minute. Booting safemode does not help, it simply hangs at some point on the scrolling black screen instead.I can boot 9.04, which is still installed on another partition, just fine.Is there any way I can boot to a terminal and try running apt-get again, to see if I can fix whatever's wrong?
View 1 Replies
View Related
Jan 20, 2010
I tried to install ubuntu 9.10 with the live cd, but my computer freezes on the welcome screen, where you select the language (for the second time).After that the ubuntu logo starts pulsing and after a while the welcome screen appears. At this point, my mouse and keyboard are frozen (though the laser is still working) and the only way is to turn my computer off. I can't even eject the cd rom.
View 6 Replies
View Related
Feb 2, 2010
I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies
View Related
Jun 14, 2010
I upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
View 7 Replies
View Related
May 11, 2011
I've been using Ubuntu 11.04 for some time now and I'm experiencing many severe bugs. One of this is very bothering and I still can't find a solution. I experienced many problems maybe related to this, but seems to have gone away by downgrading xserver-xorg-video-ati. Still anyway, when in dual screen, after some time, the screen completely freezes. The system is completely freezed, I can't even go to a shell, but I noticed it is possible to log in via ssh.
I've never had problems with ATI opensource drivers. Now I even noticed a logout problem anyway (which is known as far as I know). Is there anyone else experiencing the same? I found some others complaining about something similar, but not exactly the same and still no solution. Is it possible to somehow debug this when it happens? I have to note that I'm still using kernel version 2.6.35 because the new 2.6.38 is not booting at all. But I don't know whether this is the problem or not.
View 4 Replies
View Related
May 6, 2010
I have a Wubi installation, and the upgrade to 10.04 froze. I didn't note down the point at which it froze.
When I tried to reboot, I got the grub screen, and when selecting Ubuntu I get lots of text messages scrolling by, but it freezes at battery check.
The machine boots fine into Vista.
Rather than spend a lot of time trying to figure out what went wrong in the upgrade, my inclination is to delete the Wubi installation from within Windows, and then do a fresh install of 10.04 under Wubi. Is this feasible/sensible?
There are a handful of files I would like to salvage from the prior installation, however. Could I do that with a Live CD since the prior installation was under Wubi?
View 3 Replies
View Related
May 11, 2010
I have been running 32 bit karmic (and before that jaunty, intrepid and hardy) with no problems on my Dell D620 laptop. Since I upgraded to lucid, I get occasional freezes. It often happens at the gnome login screen after I click on my name but before I can enter the password, or upon restore from suspend but sometimes at other times. It doesn't happen all the time but often enough to be really annoying. When the freeze occurs, the mouse pointer responds to the touchpad or an external usb mouse, but no mouse button events are recognized and the keyboard has no effect either. I can't switch virtual terminals or anything. If the system was up and had a DHCP address at the time of the freeze, I believe the network still responds to ping. The only thing I can do to get the system back is hold the power button for 30 seconds until it powers off. The desktop CPU temperature monitor does not indicate excessive heating at the time of the freeze. I don't know whether I should try a re-install of lucid, or just go back to karmic.
View 4 Replies
View Related
Oct 11, 2010
I did normal net upgrade after the official release of 10.10 yesterday evening. On reboot I get a frozen system with a blank screen. Checking via safemode, I find it is stuck when 'checking battery state' but this is a desktop machine! Apt update, uninstalling ubuntu-desktop, reinstalling ubuntu-desktop, etc.
View 9 Replies
View Related
Sep 30, 2010
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies
View Related
Jan 29, 2011
I just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
View 9 Replies
View Related
May 4, 2011
I just dusted off my old Compaq Prezeio 900Z. Unfortunately, when I try to install Ubuntu, it screen freezes on me and the computer restarts.
View 9 Replies
View Related
Dec 8, 2010
Ok, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies
View Related
May 14, 2015
Acer desktop m3641
mcp73 (the motherboard?)
Intel pentium dual cpu e2200
ram 2gb
hdd 300gb
The only os is debian and there is plenty of space on the hdd.
Symptoms: When I click on something, say Evolution or Empathy or Maps, about 1 in 5 times the screen will freeze and I have to switch the computer off and on again.
I had this problem with Wheezy and could not resolve it. In the past week I have installed Jessie 32bit and then Jessie 64bit and I get the same problem.
On downloading my copies of Jessie I have verified the md5 and sha.
View 5 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Apr 18, 2010
I start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
View 4 Replies
View Related
Jan 13, 2011
I have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
View 9 Replies
View Related
Aug 11, 2011
I have a Lenovo Thinkpad T520 laptop with Nvidia NVS 4200m Graphics card. I installed Ubuntu 11.04.
Before I installed Ubuntu 11.04 I had went to my bios and disabled Nvidia Optiums and changed the graphics to Discrete Graphics. Then inserted my Ubuntu 11.04 CD and installed.
With this I had gotten unity to work. However when I pull the power cable from the laptop my screen freezes. Also if press "FN"+ Home or END to change the brightness of the screen my screen freezes and no longer able to move the mouse or press anything on keyboard.
Did anyone ever run into this problem and or fix this issue? I can get the graphics working properly with Ubuntu 11.04 with Unity with a Nvidia NVS 4200m graphics card.
View 2 Replies
View Related
Aug 16, 2011
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies
View Related
Jun 8, 2015
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
View 5 Replies
View Related
Aug 19, 2009
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
View 1 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
