Ubuntu :: Sometimes When Resuming From Suspend - Screen Flickers With White Lines
May 29, 2011
I've been away from Kubuntu for a while but came back when Kubuntu 11.04 was released because it's awesome. I have a newer laptop since then, a Latitude E6410 with Intel graphics and 8GB of RAM. Everything works great, except......Sometimes when I resume from suspend to RAM, the screen flickers with thin white lines across the screen. I can switch to a tty and reboot it from there, but I'm unable to use KDE until I reboot. A lot of times resuming from suspend works without issue, but sometimes this problem occurs. I haven't figured out exactly what triggers it. In fact, the most recent time it happened, I didn't even have an application open.
I would like to figure this out because I use suspend a lot. I rarely turn off my laptop unless an update requires me to. I prefer to be able to close my lid and resume whatever I was working on later, but with this glitch I cannot trust it to do that.
View 5 Replies
ADVERTISEMENT
Oct 29, 2010
Recently I've keep getting a white screen that flickers on and off, on my Samsung NC10 netbook.
It only seems to happen when I'm running off mains power, and screen brightness is 100%. Stops when I lower the screen brightness.
View 1 Replies
View Related
Jul 13, 2010
I have this situation: I installed F13 on my laptop having an Intel Graphics Media Accelerator. The screen of my laptop was flickering and i did a 'yum update'. The flickering didn't stop, but after suspending the system once, the flickering stops and everything is fine. Now after each reboot i have to suspend the system once for the flickering to stop. Please help.
After discussing in #fedora in freenode, some people asked for these (i'm posting in case you need them too):
$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
/var/log/Xorg.0.log -> url.
View 2 Replies
View Related
Jan 26, 2010
I have installed Xubuntu 9.10 on an Acer Aspire One 160HDD, 1RAM, 11.6''If I switch to suspend mode, on resuming it shows a black screen (but it still works forcould ctrl-alt-del and then restart)I read somewhere it could be a problem with the swap particion, but I have partitioned/ 10GBSwap 2.5 GB/home the rest
View 5 Replies
View Related
Aug 19, 2010
I have noticed that there are some tiny white scanlines over the screen in linux, is this something known? specific graphics cards? just an issue with my setup?
Its hard to explain but its even horizontal scanlines, like small white lines over the screen, like every 3 line... was wondering if its my geforce 8800 or what it is?
View 5 Replies
View Related
Jun 29, 2010
I have a very strange problem since I turned to kubuntu 10.4. Often, after some heavy working, my laptop works very slowly and suddenly when loading something, it locks and white lines turns all over the screen, just like curtains. Linux jumps out of KDE and logs in automatically. That's very anoying since all my work is lost and it turns back to the previously saved session.
Also, often when I boot, the load screen is also mmissed up with those white lines. The only thing I can do then is to reboot.
I tried to re-install kubuntu (in first instance, i upgraded in kpackage, then i re-installed with formatting the root en swap partitions).
I don't know how to solve it. Only thing that seems reasonable now is to downgrade, since i didn't have this problem on 9.10 (fyi: I have a dell inspiron 1501 with ATI Xpress 1150 256MB HyperMemory video card, formerly i had problems to have good graphic drivers for it on previeous versions of kubuntu (some 3d games didn't work), maybe this has someting to do with it?)
View 3 Replies
View Related
Mar 14, 2010
I am having problems with my wuxga 1900x1200 laptop display.The machine is a Dell inspiron 8600 with nvidia chipset.I am running driver 175 from the Karmic repo. My problem is when the machine wakes up after a suspend, the display blooms to bright white.The only way I have found to recover is power off the machine. After a bit of research I suspect it may be the refresh rates in xorg.conf, but lowering the values has not changed anything. Here is what I have currently.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010[code]....
orig values were horiz 30-128 and vert 50-90.I'm not sure it's the refresh...
View 4 Replies
View Related
Sep 11, 2010
I'm running Ubuntu 10.04. What I want to do is have the xboxdrv (xbox userspace driver) run after I resume from suspend. I created a script for it to run at boot and that worked out fine but I can't figure out how to enable it after I resume. I found something that described how to resume a module from suspend and it was to be placed in /etc/pm/sleep.d. That script looked like this:
#!/bin/bash
case $1 in
resume)
[code]...
That was for a wireless module to load after a suspend. What I did was replaced /sbin/modprobe ath_pci with the location of the xboxdrv at /usr/bin xboxdrv; unfortunately, that didn't work. I actually tried pointing it to my script that runs at boot but that also didn't work. Is there anyway I can just write a simple script that will run after I resume?
edit: Okay I also tried putting a script in another place at /etc/acpi/resume.d/xbox.sh; I had to create the folder resume.d. There I put the same script that I use at startup (which works fine) and it still won't work.
View 2 Replies
View Related
Aug 3, 2010
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies
View Related
May 30, 2010
Before upgrading to 10.04 from 9.10, I had sound issues after resuming from suspend (I had no audio at all). I found a script that solved the sound issue. My problem now is, with 10.04, the script keeps my laptop from going into suspend. I haven't been able to find anything to resolve this issue in 10.04. Any help as to why/how to resolve?
View 4 Replies
View Related
Sep 9, 2011
The machine completely locks up (Caps lock LED doesn't even light up). I've followed the wiki, but the following command did not yield any information. dmesg | grep "hash matches" after echo 1 > /sys/power/pm_trace
View 2 Replies
View Related
Feb 13, 2010
Touchpad on my laptop does not works after I resume it from hibernation/suspend. I have FC9 (sulphur) installed on my system.
View 3 Replies
View Related
Sep 4, 2015
When I suspend my computer, everything resumes fine... but the sound. The sound actually still works for the internal speakers, but not anymore for any jack-plugged headset or speakers. If I reboot, it works again. I also see nothing in the logs (dmesg, /var/log/messages).
These two commands return the same thing before and after resuming:
Code: Select allwoowoo:~$ cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7a14000 irq 34
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7a10000 irq 33
[Code].....
I also tried
Code: Select allsudo alsa force-reload
As it was recommended a lot when I googled it, but it seems that the alsa bin/script is not available on debian. It tells me repeatedly to install alsa-base, which was already installed. The following commands have been run one after the other, in that order:
Code: Select allroot:~# alsa force-reload
The program 'alsa' is currently not installed. You can install it by typing:
apt-get install alsa-base
alsa: command not found
Code: Select allroot:~# sudo apt-get install alsa-base
Reading package lists... Done
Building dependency tree
Reading state information... Done
alsa-base is already the newest version.
[Code] ....
How to prevent me from rebooting each time I need sound after suspending my computer?
View 4 Replies
View Related
Dec 11, 2010
since ever, i face the problem, that i cannot continue using my computer properly after i suspended it to ram and wake it up again.Fedora 14, 64-bit, most recent and stable kernel
mainly KDEMotherboard: Gigabyte P55A-UD4Hard DrivesSAMSUNG HD501LJSAMSUNG SP1213NI can figure out, that everything works fine, but with a severe delay.Having a look at my led, signifying hard drive activity, it flases once a second for approx 10ms. frequency is very constant.so i performed several checks:firstly, hdparm -i, there is no difference before and after sleeping mode:
Code:
[root@bobbl-pc bobbl]# hdparm -i /dev/sda
/dev/sda:
[code]...
View 1 Replies
View Related
May 31, 2011
I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
View 5 Replies
View Related
Mar 5, 2010
I recently installed Ubuntu on my laptop and on my desktop i have two white lines on both sides. Ive been living with them there but after changing my theme ive really noticed them. Gnome-Panel covers up the lines, but they are still on the wallpaper.
Every wallpaper ive tried has had this problem, ive tried wallpapers with smaller resolution, same resoluton of my screen (1280x800) and larger ones.
I have a NVidia GeForce 8400 GS with drivers installed from jockey. Ive attached a screenshot.
View 6 Replies
View Related
Jul 24, 2011
I installed Ubuntu server (32-bit) on a Dimension 2200 (256mb ram, celeron processor). When I boot, i get white and black lines over the screen which makes the text beneath it impossible to see. I've (attempted to) post an image showing this.Is there any way to fix this? The text-mode installer and the GRUB menu display fine.I've used ubuntu on many PCs and never seen this happen, and I couldn't find any results when I googled the issue.
View 2 Replies
View Related
Feb 18, 2010
When the computer is in standby i press the power button and it whirrs into life but the screen stays blank and the power light stays orange.
Only way to sort it is to turn it off then on again.
View 1 Replies
View Related
Apr 15, 2011
I bought a laptop from ZaReason (zareason.com) with Ubuntu already installed. I am currently running 10.10. The machine has worked great but recently has had problems coming back from hibernation. This is a new problem and did not seem to coincide with an update or new software. When I try to "wake up" my laptop, it shows a bunch of text (I am not that computer-literate, so I don't understand the text) and becomes unresponsive. I will insert an image of my screen when it is frozen: DSCF7055.jpg
View 2 Replies
View Related
Mar 13, 2010
I have been (in retrospect) screwing around with drivers and various packages in Synaptics on a Fujitsu Siemens ESPRIMO Mobile, which has a SiS graphic card. Now I get a normal boot up until about 5 seconds after the Ubuntu-mark shows up in the middle of the screen. After that the screen flickers and goes on and off, without any results. This just continues forever, without any solution. I have tried the recovery mode, and tried to remember which packages I installed, and then tried to remove them, without success. Any tips on what to do, except reinstall?
View 1 Replies
View Related
May 29, 2011
I have weird graphical glitches in Gnome 3. They appeared in RC3 and now appear in the final release, but they didn't appear in beta. Here's what they look like, there are horizontal white lines appearing in different places where they shouldn't appear:
[URL[
it can be a result of this bug:[URL] but my glitches look different than the ones in there.
I have a Mobility Radeon HD 5650 video card. Should I just update my system regularly and hope it gets fixed, or is there some way to fix it by tweaking some settings or stuff? Maybe by installing the official ATI drivers? I'm not sure, but I've read somewhere that the official drivers don't work well with Gnome 3, is that true?
View 9 Replies
View Related
Aug 21, 2010
I've just done a clean install of 10.04.01 (64bit) and am having a few issues with the Nouveau driver.
1. I'm getting a series of horizontal lines across the screen ( image).
2. I'm getting, what appear to be, GPU lockups. This appears to happen after an amount of browsing and rendering images.
My system setup is:
10.04.01 LTS
grep 'Monitor name' /var/log/Xorg.0.log
(II) NOUVEAU(0): Monitor name: EA231WMi
VGA compatible controller: nVidia Corporation G71 [GeForce 7300 GS] (rev a1)
View 2 Replies
View Related
May 4, 2011
I'm using the default Ambiance theme with 11.04, but my bottom gnome panel has strange white vertical lines as well as a very light background on active windows. It's almost as if it's using the Clearlooks theme for open applications and Ambiance for everything else. Also when I right click some of the systray items I get weird backgrounds in the tooltip. So far I've tried deleting all my .gnome config folders in my home directory, logging in/out etc. and nothing seems to work. Attached screenshots of the problems.
View 1 Replies
View Related
Apr 22, 2011
I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...
View 1 Replies
View Related
Jan 9, 2009
Downloaded the F10 live CD. Booted to it, got past the white, blue, and dark blue loading bar then my screen would be covered in black and white lines. No sign of the GUI except for a mouse cursor. ctrl+alt+backspace would cause the display to blink off and then come back on to the same thing. ctrl+alt+f2 would bring me to a terminal, logged in as root, but from there I couldn't do anything. startx would tell me I had x running on another screen.
hitting tab when booting the livecd and adding "xdriver=vesa" and "nomodeset" to the boot line. That works. I get to the desktop at native res with desktop effects. Killer. I tried to install; install went flawless, rebooted to my HDD and the same issue, black and white bars. When booted to my HDD, however, ctrl+alt+f2 doesn't bring me to a terminal, it causes my monitor to go into sleep mode and my computer becomes unresponsive so I can't do anything from the command line.
Here's what I'm getting at : how do I get my installed version of F10 to do the "xdriver=vesa" and "nomodeset" args that the livecd can do?
My machine is a home built machine I bought off of a friend. P4 2.4 ghz, GB RAM, 2 80GB HDDs, Radeon x1600.
View 3 Replies
View Related
Apr 1, 2010
I've had a look and can't find this particular problem on the boards (feel free to correct me if there is something useful already though). I've recently got a Sony HDTV, and have hooked it up via HDMI to an Nvidia GeForce graphics card. Surprisingly enough, I'd like to watch movies/TV this way. However I'm experiencing flickery horizontal white lines on the desktop, and horizontal lines through video. I generally use VLC to play stuff, and have the 805 Nvidia proprietary driver installed.
So far I've tried:
Changing the resolution and refresh rate (Including the native TV ones)
Using Twinview, Separate X Screen and unplugging my monitor altogether.
Uninstalling the Nvidia Drivers and using the standard ones
Re-Installing the Nvidia Drivers
Xine Player
Changing video output of VLC to X11
Using Force scaling (I think, it's a tv-specific setting to compensate for differences in native resolution)
Switching desktop effects on and off
In short, it doesn't seem to be an issue with drivers, resolution, refresh rate, video files, codecs or players. How to stop these flickery lines as I wouldn't like to have to give up on the OS over one problem.
View 2 Replies
View Related
Mar 21, 2010
im still pretty new to linux and have been using it since december. lately the screen keeps blinking. almost like the screen is going out. this only happens while it uses the fedora from my hard drive. the screen acts just fine while in the BIOS and when i boot from the live CD its all smooth. but when i boot from my hard drive, as soon as fedora starts to boot up its starts blinking and flickering again. im running a virus scan right now with clamtk.
not sure if this is relevant or not but: 2 days ago my friend had a worm virus shutting down her laptop. so i backed up her important files and photos on a thumb drive, formatted and reinstalled her vista for her. during the installation of windows i popped the thumb drive into my laptop (fedora 12) and imediatly did a virus scan with clamtk. no viruses found.
View 14 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Sep 1, 2011
The problem is black screen after resuming hibernation.After I switch my computer on (after hibernation), I can see some progress bar and (after loading to 100%) black screen appears.I have Debian + GNOME and I DON't have xscreensaver.
View 2 Replies
View Related
Aug 28, 2010
As the title says, when I select the install option on the liveCD, the Ubuntu logo is shown, and the flickering starts. I've tried the vga=XXX option, but no luck. Any experiences? It doesnt' happen with the 9.10 live CD...
View 3 Replies
View Related