Recently I've keep getting a white screen that flickers on and off, on my Samsung NC10 netbook.
It only seems to happen when I'm running off mains power, and screen brightness is 100%. Stops when I lower the screen brightness.
I've been away from Kubuntu for a while but came back when Kubuntu 11.04 was released because it's awesome. I have a newer laptop since then, a Latitude E6410 with Intel graphics and 8GB of RAM. Everything works great, except......Sometimes when I resume from suspend to RAM, the screen flickers with thin white lines across the screen. I can switch to a tty and reboot it from there, but I'm unable to use KDE until I reboot. A lot of times resuming from suspend works without issue, but sometimes this problem occurs. I haven't figured out exactly what triggers it. In fact, the most recent time it happened, I didn't even have an application open.
I would like to figure this out because I use suspend a lot. I rarely turn off my laptop unless an update requires me to. I prefer to be able to close my lid and resume whatever I was working on later, but with this glitch I cannot trust it to do that.
I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
I have been (in retrospect) screwing around with drivers and various packages in Synaptics on a Fujitsu Siemens ESPRIMO Mobile, which has a SiS graphic card. Now I get a normal boot up until about 5 seconds after the Ubuntu-mark shows up in the middle of the screen. After that the screen flickers and goes on and off, without any results. This just continues forever, without any solution. I have tried the recovery mode, and tried to remember which packages I installed, and then tried to remove them, without success. Any tips on what to do, except reinstall?
View 1 Replies View Relatedim still pretty new to linux and have been using it since december. lately the screen keeps blinking. almost like the screen is going out. this only happens while it uses the fedora from my hard drive. the screen acts just fine while in the BIOS and when i boot from the live CD its all smooth. but when i boot from my hard drive, as soon as fedora starts to boot up its starts blinking and flickering again. im running a virus scan right now with clamtk.
not sure if this is relevant or not but: 2 days ago my friend had a worm virus shutting down her laptop. so i backed up her important files and photos on a thumb drive, formatted and reinstalled her vista for her. during the installation of windows i popped the thumb drive into my laptop (fedora 12) and imediatly did a virus scan with clamtk. no viruses found.
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
As the title says, when I select the install option on the liveCD, the Ubuntu logo is shown, and the flickering starts. I've tried the vga=XXX option, but no luck. Any experiences? It doesnt' happen with the 9.10 live CD...
View 3 Replies View RelatedI'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
I burned Ubunto 10.10 to a disk and when it goes to load I can see the Ubunto load up and ask me what language I want except the screen flickers like crazy.
my video card: ATI Radeon HD 5700 series
here is the link to the short video: [URL]
I have a strange problem with some applications in 10.10. This applies so far to virtualbox and skype. When I try to start them, nothing happens. Virtualbox just flickers the edge of the screen. Virtualbox has worked before, and i'm reluctant to delete it as I have another machine installed. Skype has never worked, and even when I have reinstalled, the same happens.
View 2 Replies View RelatedI just installed Fedora 13 with KDE4 and my screen flickers! I have already read section 5.1 of [URL] but am unsure about how to carry out the suggestions. For instance how do I add "nomodeset" as a kernel parameter? I do not even know whether this is the proper solution.
View 2 Replies View RelatedI have this situation: I installed F13 on my laptop having an Intel Graphics Media Accelerator. The screen of my laptop was flickering and i did a 'yum update'. The flickering didn't stop, but after suspending the system once, the flickering stops and everything is fine. Now after each reboot i have to suspend the system once for the flickering to stop. Please help.
After discussing in #fedora in freenode, some people asked for these (i'm posting in case you need them too):
$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
/var/log/Xorg.0.log -> url.
I have laptop with Mobility Radeon HD3200 graphics. Gnome 3 works more or less fine until I start Skype. When Skype is running switching between the windows is a pain in the a$$. The screen flickers, looks crappy, takes ages to refresh, etc. Anyone experience similar things? I also noticed that when I start yumex I also get the screen doing the same things as with Skype, but to a much lesser extent and only for a few seconds. Could it be related to the network connection? Running F15 64
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I recently installed Ubuntu 10.04.1 (64-bit) on my Sony VAIO VGN-NW350F and every few minutes a 1-inch strech of multi-color quickly flickers on the screen. It almost looks like a bad hardware connection but I do not have this problem when running Windows. I am currently running at 1366 x 768 at 60 Hz.
View 2 Replies View RelatedI'm suddenly experiencing a white screen on my laptop after logging in, possibly as a result of some routine updates last night although I can't find any posts here today recounting similar problems.It's possibly Compiz related as I can get to a visible desktop by blindly using Alt+F2 and entering "metacity --replace". Maybe even a problem with my video drivers?
View 1 Replies View RelatedI'm new to ubuntu but I've installed ubuntu 10.10 on my desktop and it seems to work fine. But it keeps freezing up on me (sometimes a solid white screen, other times with vertical lines on a white background) and then becomes non-responsive. Sometimes there is a small (about 1in) square where the mouse was when it froze.I have a fairly old computer (emachines T6522). Is there something I can do to keep it from crashing?
View 7 Replies View RelatedI'm running Ubuntu 10.10 off a desktop. I was using it for quite a while up until last night when out of nowhere while surfin', and browsing, the screen just turned white, I've tried restarting by powering off manually, as I couldn't get it to any other way. After the computer restarts, it might flash black for a sec a couple of times, then back to being white again, the BIOS screen doesn't even show up. It sounds like in the background the computer might still be loading up. My monitor is a 21"LCD, if that means anything?
View 2 Replies View RelatedI have been using Netbook Remix 9.10 and it's been great until this morning.
Today when I turned it on, after Grub and the loading screen, the system brought up a smaller white screen in the corner with my username@machinename"~$ as the first line.
This looks like a terminal window. I can see my folders and use the system but I get no GUI anymore. Not sure why this is happening.
Tried booting into Recovery and updating the system, but to no avail. I've also searched the forums for the last few hours but have not found anything similar.
Anyone have any idea what to do? code...
Not sure if this is relevant to my problem or not. However, I do remember this happening on my desktop version of 9.10... that was solved by installing 9.04.
I have an Acer Aspire 5220 with and AMD processor and 1 GB of RAM. I had Windows vista and now have Dual Boot Vista / Kubuntu 9.10 clean install. Recently a blank white box appeared in the upper left corner of the screen. About 10-20 minutes after I log in it appears and disappears after 1-2 hours.
View 2 Replies View RelatedAbout 1/2 - 3/4 of the times I boot my PC to 10.04 RC, It quickly goes into a white screen at the beginning and then just hangs there. I updated from 9.1 and it did this, then I fresh installed and had same issue, including when I tried to boot of the 10.04RC boot CD (before 10.04 was even installed). There is nothing listed under sys/admin/hardware. In all cases, I have to hold power button, and keep rebooting...eventually, it will boot normally. I had no problems in 9.04 (nor on XP which I had on the system originally). I do not have a dual boot system, only ubuntu. I have ATI x1900 video AMD 64 X2 dual core 4200 Asus MSI motherboard 2gig ram 250 gig WD HD
View 8 Replies View RelatedAfter being on the computer for awhile, it suddenly stops and goes to the purple screen like one would see when turning the computer on, only slightly distorted. after a few moments it switches to a black screen with a flashing _ but you can't type anything, and then it changes so it's blank, and these white bars start to flash on the screen. I just put 10.04 on my computer about two days ago, it's been doing it since. When I first tried to upgrade from 9.10 I encountered a huge error of some sort so I just put a brand new install onto the computer from CD.
View 3 Replies View RelatedI started installing ubuntu and it goes thourgh the loading screen then it goes stripped white.
View 2 Replies View RelatedI know this is Ubuntu forums, but my other laptop has Ubuntu and I know this is a community full of very smart people (got Ubuntu help the other day).Anyway , this laptop's problem is, the screen goes teal i areas that were once white. Now, originally I thought something was broken, but now my theory is it's a loose connection. On the bottom left of the screen there is a thick black cable that leads up behind the screen and connects with that duct tape looking thing. If I simply lift up on the black cable, the screen goes back to normal.
View 1 Replies View RelatedUsing Ubuntu 10.10.Recently updated to kernel 2.6.38.Strange problem.. all windows display fine when they are not minimized. But as soon as I minimize ANY window, all the contents are wiped out. All I get is a title bar with white window. This happens with every window e.g. browser, games, system windows, text pad etc.I am using Nvidia drivers. Could that be the problem?
View 1 Replies View RelatedIn an attempt to find a good version of the Ievan Polkka, I went to visit Grooveshark, only to find that apart from the top Grooveshark bar andthe middle play-controls bar, everything else is white.I have installed Flash using Flash-aid. I have Java 6u26 installed manually and verified by the Java website
View 4 Replies View RelatedNo matter what app I use, if I view a window at full screen, the contents of the window are white instead of displaying the content. I have to re-size the window smaller in order to see the contents of a window. What can be causing this and how do I fix it?
I am using a HP laptop running 11.04 in Classic mode.
I have 10.04 installed in a dual boot system with windows 7 pro on 1 desktops and one laptop. Also dual boot on a desktop with windows xp and Ubuntu 10.04. The two desktops run AMD processors and the laptop uses an Intel processor. On the two desktops after booting the screen will fade to black and white and then back to color. While in the black and white the computer is frozen. This happens using Firefox mainly and other programs. It never happens using my laptop with the intel processor. Does Ubuntu 10.04 have a problem with AMD processors? It does it so much it is hard to do anything with the and desktop computers, but I have never seen it happen on my intel laptop.
View 10 Replies View RelatedI recently downloaded Ubuntu 9.1 and burned it to a CD. However, I can't seem to get it to boot. I got to the main menu and selected to run it directly from CD, and the Ubuntu symbol showed up saying it was loading things, but then the screen went black and nothing happened even if I waited over 15 minutes. During this time the HDD light was flashing every second or two, and I could see about three white pixels at the top most row of the screen.
View 8 Replies View RelatedMy terminal program comes up as a white screen (see Screen shot picture)and so does the login screen (Like when you run updates and it asks you to log in so you can update, YES that screen) I have searched and found nothing on this
I have a Dell Optiplex GX115
Dell LED flat screen 49T monitor
Ubuntu 9.10
512mb ram
80gb hard drive