The problem is black screen after resuming hibernation.After I switch my computer on (after hibernation), I can see some progress bar and (after loading to 100%) black screen appears.I have Debian + GNOME and I DON't have xscreensaver.
View 2 RepliesI use Debian Jessie with Linux 4.4.6 from backports and obviously systemd. My graphics card is Intel HD 5500, my processor is Broadwell i5-5200U. I use Toshiba Satellite Pro laptop.Suspending to RAM works fine, but I have problem with hibernation. Resuming from hibernation also works, but only when time between hibernating and resuming is a few hours. When this time is for example 10 hours (I hibernate before going to sleep and resume next day morning), I can't resume from hibernation. I see only black screen and keyboard doesn't work. In that case when I type in terminal
Code: Select alljournalctl
I can see:
Code: Select allPM: Starting manual resume from disk
PM: Checking hibernation image partition UUID=8640b415-7de4-48c2-b6ab-2629a5894316
PM: Hibernation image partition 8:4 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
This is weird, because when I hibernate and resume after 2 hours, everything is OK. My SWAP is large enough (I have 16 GiB of memory and 16 GiB of SWAP).
I have Code: Select allGRUB_CMDLINE_LINUX_DEFAULT="quiet resume=UUID=8640b415-7de4-48c2-b6ab-2629a5894316 acpi_osi=linux i915.enable_rc6=1 i915.lvds_downclock=1 i915.enable_fbc=1 pcie_aspm=force" in /etc/default/grub and Code: Select allRESUME=UUID=8640b415-7de4-48c2-b6ab-2629a5894316 in /etc/initramfs-tools/conf.d/resume
I hibernate my computer using hibernate button in Kickoff in KDE Plasma.
I have installed VirtualBox and since then resuming from hibernation doesn't work again (my previous thread: [URL] ....). My question is: Can VirtualBox kernel modules (vboxpci, vboxnetadp, vboxnetflt, vboxdrv) break hibernation? If yes, what to do? Maybe unload them before hibernation, blacklist when resuming and load after resume? And how to do that with systemd? URL....
View 4 Replies View RelatedI bought a laptop from ZaReason (zareason.com) with Ubuntu already installed. I am currently running 10.10. The machine has worked great but recently has had problems coming back from hibernation. This is a new problem and did not seem to coincide with an update or new software. When I try to "wake up" my laptop, it shows a bunch of text (I am not that computer-literate, so I don't understand the text) and becomes unresponsive. I will insert an image of my screen when it is frozen: DSCF7055.jpg
View 2 Replies View RelatedTouchpad on my laptop does not works after I resume it from hibernation/suspend. I have FC9 (sulphur) installed on my system.
View 3 Replies View RelatedI have installed Xubuntu 9.10 on an Acer Aspire One 160HDD, 1RAM, 11.6''If I switch to suspend mode, on resuming it shows a black screen (but it still works forcould ctrl-alt-del and then restart)I read somewhere it could be a problem with the swap particion, but I have partitioned/ 10GBSwap 2.5 GB/home the rest
View 5 Replies View RelatedI installed Debian Squeeze from Debian 6.01 CD 1 on my old Pentium 4 Desktop. Now when I log off, the screen gets black and login window is not appearing. I have tried all old post of linux questions forum and also of ubuntu
View 7 Replies View Relatedi have an installation of wheezy 7.8 i think. i was facing difficulties in read of matroska video. therefore have decided to installer gstreamer1.0 wich should be resolve my problem. i have added the backports repository in apt sources list. after an apt-get update i launch apt-get install gstreamer1.0 . i have noticed it have starting downloading more file than it needs i concluded that it was a upgrade or something like because the kernel was also updated. after the the packet downloading it has started the installation with some errors related to LOCALE LCC. it has stopped and restarted some services wich is normal. i have closed all others apps and restarted. Here start the hell. after the restart i have passed the kde login screen and after BLACK SCREEN with mouse working.
Alt+F2 don't open the krunner
What i have tried? i have rename the /home/jefcolbi/.cache and back it again, rename /home/jefcolbi/.kde and back it again. next i have tried to check the Xorg config file. i created a new one with X -configure, modified it to feet my system configuration this does not resolve the problem but add another the keyboard is not working in graphical mode.
My system configuration:
Toshiba laptop Satellite Pro L300
Dual core
3gb Ram
graphic card:Mobile Intel(R) GMA 4500MHD
sound card: Intel HD Audio
debian whezzy 7.8 with KDE
Note: everything was working fine before trying to install gstreamer1.O from backports repository
I have a problem with my computer running debian testing with kde. When after a while I'm away form keyboard my screen turn off for power saving, but I cannot in any way turn it on again.
I tried moving mouse, pressing some key, Ctrl + Alt + Del, Ctrl + Alt + BackSpace, Ctrl + Alt + Esc, and also Ctrl+Alt+F1/2/ecc.. No way. I had to reset my computer every time.
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies View RelatedI am new to Linux and installed Debian. After the Installation I started Debian and ended in a black screen. I came out there changing to a terminal (ctrl+alt+F1) but I dont know how to get Xorg running. I am using the Mainboard:Gigabyte GA-D510UD without any extras (means just the Mainboard with Ram and an IDE Hdd). here is the Log file from Xorg [URL]... System Information is in the log.
View 7 Replies View RelatedWhat I mean by black screen is that whenever I view a video or if there is video content anywhere on the page, my whole monitor goes black for around 3 seconds then plays the video content.
I am running Jessie 8.2 by the way.
Yesterday I done an upgrade with apt and since that time whenever I boot up I am presented with only a blank screen and an unresponsive cursor. I cannot switch console using Ctl+Alt+F*. The only thing I can do is Alt+SysRq+(R,E,I,S) which kills gdm3 and gets me back to the console.
* I can get into Xorg fine via the startx command
* As a temporary fix, if I enable automatic login (via /etc/gdm3/daemon.conf) then gdm3 works.
But I can't get the normal authenticated login screen to work.
Output of journalctl for a failed attempt at running gdm3 with verbose debugging enabled:
Code: Select allOct 25 01:24:43 [hostname-removed] systemd[1]: Starting GNOME Display Manager...
Oct 25 01:24:43 [hostname-removed] systemd[1]: Started GNOME Display Manager.
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Enabling debugging
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Changing user:group to Debian-gdm:Debian-gdm
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Successfully connected to D-Bus
[Code] ....
One other thing worth noting, before upgrading yesterday, I changed mirrors and accidentally pasted in "stable" into /etc/apt/sources.list. So basically I did an initial upgrade, realised my mistake, switched back to testing (which I was on before) and done another upgrade, which is when I noticed this problem.
After applying upgrades to debian 8.2 on a lenovo yoga3 notebook and a reboot I am not able to login into my GNOME desktop. The login screen stays black. If I press the power button to suspend I can see the login screen with default background for ~1 second before it turns black again. What can I do to fix this issue? Is there a way to login via terminal and do a rollback? Can I use my home folder an personal settings if i reinstall debian and keep the /home partition?
View 14 Replies View RelatedSo I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
I recently came to Debian. As I have an ati card, I tried the proprietary drivers first, but then came back to radeon (open-source). In the process, I think I may have broke my xorg.conf . Sometimes, when the monitor goes into sleep mode, when I came back, the screen remains black (sometimes I see just the cursor).
Here is my xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
Also, I have lots of backups in my X11 folder, like xorg.conf.fglrx-3, xorg.conf.original-1, or backup.xorg.conf. Is it safe to remove them? What should I do about the main xorg.conf?
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
Is there a config file to toggle whether the screen is locked after hibernation? I looked all over preferences but if it's there, I missed it. In Ubuntu, the screen was always locked after waking up. In Squeeze, it's going directly to desktop. It's not a biggie but you never know when someone might try to access your account so I kind of liked that it would wake up locked. Maybe it's doing that because I'm the only user on the system?
View 14 Replies View RelatedI want connect from remmina to jessie on another system via xdmcp but only black screen happened.
my daemon.conf
Code: Select all[security]
DisallowTCP=false
[xdmcp]
Enable=true
[debug]
Enable = true
And gdm3 listen on udp/177. My syslog :
Code: Select allJul 16 10:17:46 office /usr/bin/dbus-launch[1455]: X Error of failed request: BadValue (integer parameter out of range for operation)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Major opcode of failed request: 140 (RANDR)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Minor opcode of failed request: 7 (RRSetScreenSize)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Value in failed request: 0x0
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Serial number of failed request: 150
[Code] ....
Since doing a "full-upgrade" using the testing repositoriesotice that before an application can display its window, I get a frame with a black background for anything up to a second. I run a PC with 4 cores of 2.4 GH each.What could be the reason for this annoying behaviour?
View 5 Replies View RelatedOpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.
View 5 Replies View RelatedThis obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View RelatedWhen the computer is in standby i press the power button and it whirrs into life but the screen stays blank and the power light stays orange.
Only way to sort it is to turn it off then on again.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI've been away from Kubuntu for a while but came back when Kubuntu 11.04 was released because it's awesome. I have a newer laptop since then, a Latitude E6410 with Intel graphics and 8GB of RAM. Everything works great, except......Sometimes when I resume from suspend to RAM, the screen flickers with thin white lines across the screen. I can switch to a tty and reboot it from there, but I'm unable to use KDE until I reboot. A lot of times resuming from suspend works without issue, but sometimes this problem occurs. I haven't figured out exactly what triggers it. In fact, the most recent time it happened, I didn't even have an application open.
I would like to figure this out because I use suspend a lot. I rarely turn off my laptop unless an update requires me to. I prefer to be able to close my lid and resume whatever I was working on later, but with this glitch I cannot trust it to do that.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI`ve got problem with zoneminder and dvr card.I`ve got black screen when I`m using video for linux 2 or white screen when I`m using video for linux 1. My zoneminder logs
6.03.2010 13:31:44.079779 zmdc[3765].INF ['zmc -d /dev/video0' starting at 10/03/26 13:31:44, pid$
26.03.2010 13:31:44.108492 zmdc[3765].INF ['zmc -d /dev/video0' crashed, signal 6]
[code]....
I've installed Ubuntu 9.10 in my old desktop, i.e. Compaq Evo D510 e-pc:
Intel Pentium 4 1.7Ghz
1GB 400Mhz RAM
80GB HDD
Intel 845G chipset board
Onboard 4X AGP Intel Video chipset
Onboard audio
The above is my setup and Ubuntu runs perfectly fine when it is being cold booted, i.e. I shut it down during the night and boot it in the morning, it boots perfectly fine. But while using, it suddenly freezes and I'm only able to move my mouse pointer and nothing else works on the screen. I tried doing the Ctrl+Alt+(F1/F2/...) but nothing works.
So when I restart it using the power switch, it goes into the black screen and nothing loads up. I'm stuck over here. And if I turn it off for around 30mins by removing the power plug, and then reboot it again, Ubuntu loads without any problem and runs for sometime, then again the same freezing problem happens and I have to wait for another 30mins to boot it up again.
I have a 28" monitor connected to it and it runs at 1920 x 1200 (16:10) resolution at 60Hz.
Although it's worked very consistently in the past, since moving to the newer kernels (3.16 or 4.0) on strech/sid, resuming from hibernation seems to randomly work -- sometimes it loads the image from swap, but other times it simply does a fresh boot. To troubleshoot, I've increase the size of swap and then updated 'fstab', the initramdisk, and grub -- but still no reliable behavior...
View 10 Replies View Relatedi have a intel video card (laptop)when i try to watch movie, i get a blackscreen..... but i listen the soundMPlayer2 2.0 (C) 2000-2011 MPlayer Team
Playing_game.avi.
Detected file format: AVI format (libavformat)
[lavf] stream 0: video (mpeg4), -vid 0
[code]...