I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
I followed this guide: [URL] and restart the Squid Server with no errors but when I try to SSH into it:
Code:
ssh -L 8080:squidserver:8080 user@squidserver
It just hangs there for a long time, not timing out and eventually (after a long wait) I get this:
Code:
ssh_exchange_identification: Connection closed by remote host
What could be the problem? I can SSH normally into the computer, but not into the proxy server. Do I need to forward the 8080 port on that network?
i am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies View Relatedi just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies View RelatedCentos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies View RelatedMy company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies View RelatedI'm using a Debian box as a gateway. I'm planning on bridging my DLink 604T modem/router so that traffic on the LAN goes to my gateway (which only has one NIC). The Debian box is running a PPPoe application which I'm hoping to log into the ISP through the DLink. I plan to configure the box as a squid transparent proxy. Most Howtos I've seen use NAT with 2 NICs, eth0 for the LAN and eth1 for the Internet. Any step-through to set up NAT for this?
View 4 Replies View RelatedI have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...
View 3 Replies View Relatedi have squid 2.6 server running on rhel5. by default teamviewer access is deny. i want to allow access of teamviewer but not getting.
View 4 Replies View RelatedI'm using squid version 2.7. The problem is when access.log is writing in new file for a new day, the access.log is written under "root" id, not "proxy" id. It caused the squid services not be running. I have to "chown" access.log to become "squid" id in order to run squid services. What I saw here is new access.log is written by "root".
View 2 Replies View RelatedI'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies View RelatedI am using Redhat 5.3 , I configured well access list using IP address, but my customer want to access list on MAC address basis.
View 2 Replies View Relatedi was tasked to setup a proxy server to block access to some websites. i'm using centOS 5 and Squid 7:2.6 STABLE21-6.e15...i appended the following and tested the configuration with the supposed server i am using and the it does seem to work but now i'm wondering how i can test it with a client computer..i have 2 LAN cards and i just connected the other to one PC (can a direct connection work or does it need to pass thru a switch or hub)...i just can't figure out how it should be... how do i configure the 2nd LAN card to use this computer as its proxy server?
View 8 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I am configuring a proxy server in my desktop, which in turn passthough a proxy ( parent proxy ). I have added following line for this
cache_peer proxy.tcs.com parent 8080 0 proxy-only default
But for parent proxy, we have to specify username and password in this line, I am confused here.
login=userassword | PASS | *assword
Here where I have to enter username and password ?
I need to setup a squid 3 proxy with https bumping. Unfortunately I'm not very familiar with squid and https in general.
I already perfomed the following steps:
1.) compile from source
Code: Select all./configure --with-openssl --enable-ssl-crtd
make
make install
2.) configuration (http)
I used this guide: [URL]
3.) configuration (https)
[URL]
The server is now working for http and https, but is the server secure, too? Is the default config already secure or do I need to configure additional security features? (e.g. things like cert validation, cert pinning, [dont know what's importend], ...)
I have set up squid3 and dhcp server on my Ubuntu 10.04 box with IP address of 192.168.0.160. Single network card.Squid runs on port 3148. Everything works fine for the users provided that I set up the proxy details manually on each client pc.I want to set up the Squid to run as a transparent proxy and after reading around I have done the following.In the Squid3 conf file I have entered http_port 3148 transparent.Dropping to Root ( sudo -i )However the transparent proxy does not work and if I enter iptables -L I can see that the rule above has not been retained. The default rules in iptables only show up.
View 5 Replies View Relatedi must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
i want to setup squid proxy server at my home. my service provider has ISA server install on its machine. in windows as a client we have to enter proxy settings manually to IE and firefox. but now in squid where i have to define to use this proxy settings. and what about /etc/resolv.conf . my service provider's connection settings are stated as under.:
IP ADDR= 192.168.1.x
subnet mask=255.255.255.0
Proxy= 192.168.1.1 port= 8080
we having more than 5000 users and will have 7 squid proxy servers with high end configuration upto 4gb ram n 320*5 HD in rhel4&5 most of them complaining that at peak hours their browsing speed is slow but we are having 1gbpgs link at peak hours i.e when established connections r flowing more than 550 browsing gets slow how to do fine tuning are squid is only responsible to access upto 600 connections
View 2 Replies View RelatedThis dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedI want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies View RelatedI have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
We have two offices suppose A and B. At office A, we use centos 5.3 computer as router and squid proxy server. At office B we use a cisco router to connect to Internet. Computers at office A that has direct access to Internet can access computers behind cisco router at office B using vnc viewer. But computers at office A that can use internet only through squid proxy can't access computers behind cisco router at office B. Is there any way so that I could allow squid clients to access computer behind cisco router at office B using vnc viewer.
View 3 Replies View RelatedI am a newbie to SQUID.How to configure it and make it active in my system?
View 1 Replies View RelatedI am using squid server. I want to redirect one perticular url request to other squid proxy server .
View 1 Replies View RelatedI am trying to install Squid 2.6 as Transparent proxy server.Can anyone provide the step by step configuration details
View 8 Replies View RelatedI have configured Squid proxy on RHEL 5. Now I want all squid clients to use default website which is set by Squid Proxy Server. So whenever user opens their browser they will visit same website automatically.
View 3 Replies View Related