This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 RepliesBack in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedI've set up a very simple net with a dhcp + dns server using dnsmasq. It works but the server itself cant resolv clients names. Clients do resolv without any problem my /etc/dnsmasq.conf
[Code]...
I have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
i have a homework where i have to set up a dhcp server on linux. I am using ubuntu. I tried following: [URL] However after running "sudo apt-get install dhcp3-server" the file "/etc/default/dhcp3-server" does not appear.
View 9 Replies View RelatedIve tried on multiple occasions to setup a dhcp server, but all the google searches return legitimate results it seems, and ill set everything up, except the last few instructions i have to configure /etc/dhcp3/dhcpd.conf and /etc/default/dhcp3-server, but ubuntu says its not there.Im running Ubuntu Server 11.04 and using nano to edit files
View 4 Replies View RelatedHow to set up DHCP server in Redhat Linux 6
View 1 Replies View RelatedIs it possible to setup dhcp server in such a way that even if a client disconnects for a short period of time (5 - 10 minutes) the dhcp server keeps that address for that specific client and lease it back. Tracking can be done using the mac address of the client.
View 2 Replies View RelatedI decided to forgo my router's DHCP capabilites and try to make a random computer at my home take on the job.
First of all here's my network topology:
I have a cable modem hooked up to eth0 on my linux box, and this is where my internet comes from and works fine.
I also have another ethernet, eth1, which is connected to a wireless router in bridge mode. My end goal is to have my linux box sit between my internal network and the outside world. Thus it will need to act as a DHCP server, a NAT and as a firewall. Right now I'm just focused on the DHCP part.
Here is a copy of my dhcpd.conf file:
My /etc/sysconfig/dhcpd file has:
However the issue is that it is still listening on eth0. and not issuing any leases on my internal network.
What I think is happening is that it's not recognizing the 10.0.1.x subnet because my router is issuing leases on the 169.254.193.x, even though I put it on bridge mode. But I could be totally off mark.
Also running tcpdump on eth1, I can see requests coming in for dhcp, but my server isn't responding to them.
I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
is it possible to setup a DHCP server using the loopback or a virtual interface? I installed Sun VirtualBox on my fedora system and want to try and kickstart them from within the same box on a virtual network. Is this possible and has anyone done it? I only have a single NIC in the box and it is on my public network.
View 1 Replies View RelatedI my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
Does anyone have a link to a tutorial on how to set up a DHCP server and SAMBA as a windows domain controller? I can't really find good detailed guides by searching google.
View 2 Replies View RelatedI'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
On a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
I have come across this option given below in dhcpd.conf file for DHCP Server configuration. Can any body let me know what this option is all about.Code:option T150 code 150 = string;
View 2 Replies View RelatedI wanted to setup my server as a router/gateway just for educational purposes and also when it succeeded i will keep the gateway and place it on the front line right after my modem.
My current setup as it is now :
The GATEWAY/ROUTER will be doing the main work to act as a dhcp server and firewall.
Now my setup as it is now :
So now what i ment to do was :
Let the clients connect to the gateway via ETH1 and all the stuff being router to ETH0 which is the NIC that is connected to the internet.
But now i have two huge problems :
1. The DHCP configuration seems to be fine the client machines get their ip adresses and /etc/resolve.conf looks fine to. But somehow the GATEWAY/ROUTER wont let me use the specified external DNs server so i cant do anything on these machines.
2. The firewall script [url] at line 27 should be DROP but if i use this line of code the GATEWAY/ROUTER cannot use his dns server settings so when i try to browse the internet or ping a machine outside my local network it would came up with nothing.
\Actually i lost the login details of my server so im recovering it in rescue mode.what i want to ask here is if i restarted my server what i need to do in order to work as it was before.on my server samba and dhcp server is configured.will my client users can access there network if login page comes or i need to do something else such as restarting services or not.
View 1 Replies View RelatedI have a openSUSE10.2(X86-64) Linux DHCP Server in my environment. It has a lot of VM's and Desktop systems which get added continuously. Also, it has a lots of Static-IP entries.Part-IIssue:The DHCP Server stopped leasing the IP's somehow.Workaround:1. Stopped the dhcpd service. (service dhcpd stop)2. Navigated to /var/lib/dhcp/db folder.3. Deleted the "dhcpd.leases" and "dhcpd.leases~" files.4. Recreated the "dhcpd.leases" file. (touch dhcpd.leases)5. Started the dhcpd service. (service dhcpd stop)
View 2 Replies View RelatedI want to set up a dhcp server such that the clients get same ip every time. Giving fixed address to every client would be a long process.
"I don't want to assign a specific ip to the client but what i want is the server provides same ip every time"
Just looking for the best/most reliable setup. In a nutshell, I would love to have a Domain Controller no DHCP File server. I want to leave the DHCP to the router. I need virtual to run a software off from it. Samba server and that is basically it. My questions are:
1. Can I have a Domain Controller without DHCP server?
2. Should I run virtual server headless? so I dont install any gui?
3. This should have been my 1st question. I have two disks, is raid handled by the Bios or do I have to do something in linux(DMRAID)?
I have worked with many if not all the things I have mentioned here, however, I have never done it from scratch.
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies View RelatedI have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.
Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:
Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
[Code].....
I'm kinda new to this. I've had my laptop dual booted with vista and Ubuntu for about a year. I'm just now starting to configure Ubuntu for a DNS and a DHCP Server.
View 2 Replies View Related