Ubuntu Servers :: How To Setup A TFTP Server

Nov 12, 2010

I am trying to setup a TFTP server and followed these instructions in setting up TFTP-HPA.

[URL]

I pretty much followed every step but commented out these two lines from the /etc/xinet.d/tftp.

# only_from = 172.31.0.240/28
# interface = 172.31.0.252

Do we really need the lines if I am allowing any machine to connect? And I have only 1 network card. This is acting as a dedicated TFTP server.I ask as I get an error on the get and put commands as below:

tftp> get xxx.txt
tftp: error received from server <File not found>
tftp: aborting

However although it gives an error it DOES GET the file.The put command however does NOT put the file. I have nobody / nogroup setup for the directory permissions as well.

tftp> put .vimrc
tftp: error received from server <File not found>
tftp: aborting

View 1 Replies


ADVERTISEMENT

Fedora Servers :: Unable To Setup Tftp Server?

May 10, 2010

You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.

Code:
tftp your_pc_ip_address

View 2 Replies View Related

Server :: Configure/Setup DHCP, TFTP Servers?

Feb 23, 2010

I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.

[Code]...

View 1 Replies View Related

Ubuntu Servers :: Setup A Tftp Server To Mount A New Kernel In A DaVinci Platform?

Mar 16, 2011

I am fairly new to ubuntu server, I want to setup a tftp server to mount a new kernel in a DaVinci platform. I was following the guide in this page [URL]..docs/linux_tftp, but accidentally I remove the xinetd.conf file. So I think that maybe removing and reinstalling xinetd the problem will be solved, but instead of that I can't completely remove xinetd and the follow message is print in the terminal

Removing xinetd ...
invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found.
dpkg: error processing xinetd (--remove):
subprocess installed pre-removal script returned error exit status 100
invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found.
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 100
Errors were encountered while processing:
xinetd
E: Sub-process /usr/bin/dpkg returned an error code (1)

with that problem I can't start the service or stop it, I am blocked in the configuration of tftp server.

View 4 Replies View Related

Red Hat / Fedora :: Setup A Tftp Server On Red Hat?

Mar 26, 2010

im trying to setup a tftp server on red hat linux. Ive gone through like all the instructinos online. And like i didnt get any errors or anything when typing the commands on the terminal but basically every time i try to test it i never works sooo im not really sure how im suppose to do this. basically i have a tftp in one ip address. And with another system with a different ip address using the client tftp ipaddr(server) and i try to get foo and it never connects and I tried a ping and they ping together just fine soo im just not sure if the tftp server is even on

View 2 Replies View Related

Ubuntu Networking :: Setup TFTP Server To Work On Secondary Network Card?

Dec 14, 2010

a machine with 2+ network cards, need to setup TFTP server on one card and use internet on another.

the tftpd server works on default routing network adaptor with following configuration.

How set the TFTP server on the secondary network adaptor?

TFTP server tftpd by xinetd configuration in: /etc/xinetd.d/tftp
{
protocol = udp
port = 69
socket_type = dgram

[Code]....

Could not find how to change the post <prefix> I remembered clearly I did before.

View 1 Replies View Related

Server :: In.tftp Pxelinux.0_ Fails With TFTP Open Timeout

Mar 15, 2010

When I try to pxe boot a Sun X4100 (which actually has a RHEL OS on it right now) I get the message TFTP open timeout. All traffic is allowed for port 69 udp in both directions. I do get a dhcp address. I see that both on the server and the client it gets an IP. After that I get this message in the logs:

[Code]....

View 1 Replies View Related

Ubuntu Servers :: Ltsp Fails In Tftp Under U9.10 / Sort It?

Feb 17, 2010

In Jaunty (9.04) I've setup a small (eleven-terminal) ltsp network at the local school. It handled around 6600 working hours with ease.
Now I've upgrade the server to Karmic Koala (9.10) and it just stopped working.
1) The clients have PXE NICs
2) They get the proper IPs from the DHCP server and respond appropriately to changes in the DHCP configuration files.
3) DHCP server also points the clients to
filename=/ltsp/i386/pxelinux.0
4) When the clients try to download the pxelinux.0 over tftp they just timeout
5) /etc/inetd.conf has an entry like
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
6) The file /var/lib/tftpboot/ltsp/i386/pxelinux.0 exists on the server

I'm lost at all these configuration files and protocols.

View 7 Replies View Related

Ubuntu Servers :: How To Do A Tftp Remapping So WinPE 3.0 Will Boot

Mar 26, 2010

I have checked several tutorial sites, to no avail. I can't seem to get Winpe 3.0 to boot over tftpd/pxe.Has anyone successful done this using Ubuntu 9.10?, or am I just wasting my time trying.

View 4 Replies View Related

Ubuntu Servers :: Dnsmasq Does Not Serve Up Remote Tftp Ip?

Oct 25, 2010

I have it working fine when tftp and dhcp are installed on the same server but when trying to forward to a remote tftp it does not work. Dnsmasq insist on giving its local ip.I have added to config:dhcp-boot=pxelinux.0,pxetest2,192.168.0.130and I tried with and without the original hcp-boot=/var/lib/tftpboot/pxelinux.0Not much on this topic on the google nor on the dnsmasq homepage.

View 1 Replies View Related

Ubuntu Servers :: Installing LTSP When Using A Separate DHCP And TFTP?

Mar 17, 2010

I want to install Ubuntu LTSP on top of an already existing system. However, I want to use a different DHCP and TFTP server. Do I simply just install 'ltsp-server-standalone' with apt and run 'sudo ltsp-build-client', stop the DHCP and TFTP server and stop them from starting automatically? Would I then just copy over the pxelinux.cfg/default file from /var/lib/tftpboot along with the initrd.img and vmlinuz images to the TFTP server?

Edit: Do I need to actually copy the whole /var/lib/tftpboot/ltsp directory over to the TFTP server?

View 1 Replies View Related

Fedora Servers :: Can't Use Tftp \ Remotely It Doesn't Work?

Jul 29, 2009

Server: CentosClient: F11Remotely it doesn't work

Code:
tftp 10.0.0.2
tftp> status

[code]....

View 4 Replies View Related

Fedora Servers :: TFTP Case Insensitive To File Name Requested

Jun 19, 2010

I am downloading some files via tftp from the server (call it my server) and I need the server to be case insensitive to the file names requested. That is If I request "SoMe.TTL" and the actual file name is "some.ttl" it should send "some.ttl" back! Right now it is case sensitive and is a pain in the but because some windows clients upload files to that directory and the names can have any case. Furthermore, the file request mechanism must allow the user to input the required file name, hence the user can write using any case. Can the tftp-server solve cases by it's own? How about dnsmasq's internal tftp server? Ok, maybe I wasn't explicit above:
I need to make the fedora tftpd-server Case Insensitive!

View 2 Replies View Related

Ubuntu Servers :: Setup A Dedicated Web Server With Server 10.10 ?

Nov 24, 2010

After installation Ubuntu Server 10.10 I don't know what to do next to access to the Internet.

View 9 Replies View Related

CentOS 5 Server :: TFTP-server Unable To Send Files To Clients Outside It Subnet?

Sep 9, 2011

I have tftp-server running on Centos 5. Clients which are on the same subnet as the server are able to get and put without problems. I have a client that is across the internet that is having trouble getting files from my tftp server. A tcpdump reveals that the client is requesting the same file over and over again. In /var/log/messages, I am see the following error repeated over and over until the client finally gives up.

localhost in.tftpd[12727]: tftpd: read: No route to host

View 1 Replies View Related

CentOS 5 Server :: Setting Up Tftp-server - Cisco Switch Configurations Can Be Sent

Feb 15, 2011

I am trying to setup CentOS server 5 with tftp where the Cisco switch configs can be sent. I have the following:

[code]...

View 14 Replies View Related

Server :: Troubleshooting Winpe 3.0 Not Booting With PXE/TFTP Server ?

Mar 27, 2010

I have been trying to accomplish this feat for about a week now, and I always seem to get a boot up error.

Here is how I call WinPe from my default file

Code:

View 2 Replies View Related

Ubuntu Servers :: Small Server Setup Possible?

Jan 5, 2010

i got an old server with a 64mb flash-disk in.this seems to be the boot-disk.would it be possible to get ubuntu server on this?there is also an ide-disk in.in my opinion it should be good to boot of the flash disk and put the /home or /srv on the ide disk.someone any ideas about this?

View 9 Replies View Related

Ubuntu Servers :: Setup The Server From The Beginning

Oct 8, 2010

I am completely new to everything linux, however I decided that it was time to do something with an old pc I had and I was thinking of setting it up as a home server. I look around for an easy guide on how to set up the server from the begining but I can't seem to find one that's good for a complete beginner like me.What I would like to do is to had the server as a place where I keep all my movies, music etc and be able to acces it from my home network and also from outside of it. Also, I would like to connect my two printers to this server and share them on the network.

Is there a place where I can find simple information about what I want to do and is it possible for a complete beginner like me to do what I want to do?

View 9 Replies View Related

Ubuntu Servers :: Setup A Server For The Company?

Jan 11, 2011

I need to set up a server for my company.There are only 4 people working here and we want a server that will allow us to run a cloud-like system. We want to be able to log in and use programs and have our files available from within the office and at home. I've used Citrix in the past and would like something similar, but free/open source if possible.I want an Ubuntu based server that gives the user a windows compatible environment. What I mean is it needs to be able to run windows software.What kind of hardware do I need? We want to run fairly resource hungry software like GIS and mapping software. I want to run Ubuntu server but what other software will I need?

View 9 Replies View Related

Ubuntu Servers :: How To Setup A Dhcp Server

May 30, 2011

Ive tried on multiple occasions to setup a dhcp server, but all the google searches return legitimate results it seems, and ill set everything up, except the last few instructions i have to configure /etc/dhcp3/dhcpd.conf and /etc/default/dhcp3-server, but ubuntu says its not there.Im running Ubuntu Server 11.04 and using nano to edit files

View 4 Replies View Related

Ubuntu Servers :: Setup A SQUID Server On Red Hat

Aug 2, 2011

I am trying to set up a SQUID server on my Red Hat Linux 7.3. to act as a cache server.

The machine has 2 network interface:

eth0 172.30.254.4/23
eth1 172.3.254.65/23
Default gateway is 172.30.254.19/23
The hostname is "amelie".

[Code].....

View 2 Replies View Related

Server :: DHCP & TFTP Debugs?

Feb 23, 2010

I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP serversBut I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.

Feb 23 09:47:46 eth0-eth0 last message repeated 17 times
Feb 23 09:55:06 eth0-eth0 dhcpd: DHCPREQUEST for 192.168.1.53 from 00:13:20:36:26:28 via eth0: unknown lease 192.168.1.53.

[code]....

View 1 Replies View Related

Server :: Unable To Set Up TFTP On Fedora 12

May 10, 2010

This is very old topic but despite of trying out all possible solutions available on net and forums, I am not able to setup tftp server on my 2.6.32.11-99.FC12.i686.PAE. Is there something obvious missing out.

/etc/xinet.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer
# protocol. The tftp protocol is often used to boot diskless
# workstations, download configuration files to network-aware printers,

[Code]....

View 18 Replies View Related

Ubuntu Servers :: Setup Email Alerts For SVN Server

Jul 21, 2010

I recently setup a server running subversion. It is working well and all, but I am curious as to how to make it send out email alerts to my team when a commit occurs.Also, are their any good GUI tools to manage a subversion server in Ubuntu. The command line is fine since I made some scripts but a nice GUI would be great! Maybe that could be a fun project to work on.

View 1 Replies View Related

Ubuntu Servers :: Setup Virtual Web Server On Laptop?

Sep 20, 2010

I'm running Ubuntu 10.04 server as a guest on a Windows 7 host using VirtualBox. I've set the VirtualBox configuration to use a Bridged network connection so that I can access the internet through the Ubuntu guest and to access the Ubuntu apache server through my Windows host.This is all running on my laptop which connects to various routers using dhcp (some ip addresses start with 198. while others start with 10.) What I need is a single static ip address (or hostname/url) to setup my cms (drupal).how I can accomplish this given the varying routers the laptop connects to?

View 6 Replies View Related

Ubuntu Servers :: Setup A Secure And Reliable Server?

Dec 27, 2010

how to setup a secure and reliable server, i have three ubuntu 10.10 servers a Dell PowerEdge 850,1850 and 2850 which has a Dell PowerVault 220s attached to it.The Dell PE850 Server Consists of:

Intel Pentium D 3.0GHz
4 GB RAM
Eventually 2x250GB Sata Hard Drives

The Dell PE850 Server Consists of:

2xIntel Xeon Processors 3.4GHz
4 GB RAM
2x76GB SCSI Hard Drives RAID 1

The Dell PE850 Server Consists of:

2xIntel Dual Core Processors 2.8GHz
4 GB RAM
6x76GB SCSI Hard Drives RAID 5 (pretty sure)
Dell PowerVault 220s

I would like to setup a reliable webserver, mail server, DNS and Dynamic DNS, DHCP, SQL, FTP, Samba (with Roaming Profiles), PXE Boot Server.I know how to setup most of the server modules, i would just like to know the best way to do it tho. I also want to no how to setup the secuity of the system correctly, and setup and partition up my hard disks to allow for the best reliabilty, even when a server crashes.I would like to now how to set these servers up from start to finish in a sence.

View 1 Replies View Related

Ubuntu Servers :: Secure File Server Setup

Dec 29, 2010

I am going to set up a file server on Ubuntu. I have searched a while, but can't seem to find a guide to what I want. The requirements specifications are the following:File server: possible to upload, change and download files.Linux (Ubuntu) clients, Windows clients if possible.Access restriction to deny access to other than registered users.Only the user should be able to read the content of the files.Ideally root should not be able to see the individual files, but in worst case it is ok for root to see the files.Root should not be able to open the files.Point 1-3 is easy to find out how to set up. But I can't seem to find a way to deny root to view the files. The only solution I can think of is to encrypt files or a whole folder, but I don't know how to set it up.

The setup is for a home network, but the server used as a file server will have a web server as well. If someone manages to get access to the server I don't want them to be able to read the files.

View 5 Replies View Related

Ubuntu Servers :: Setup A DNS Server On Local Network?

Jun 14, 2011

I am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):

@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600

[code]....

View 1 Replies View Related

Fedora Servers :: Setup A FTP Server On 11?

Nov 15, 2009

i have been searching ways to setup an ftp server. but it seems, everything i tried does not work or not what i wanted.how to setup an ftp server, allowing only permitted users. I'm using the desktop edition live cd.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved