Ive tried on multiple occasions to setup a dhcp server, but all the google searches return legitimate results it seems, and ill set everything up, except the last few instructions i have to configure /etc/dhcp3/dhcpd.conf and /etc/default/dhcp3-server, but ubuntu says its not there.Im running Ubuntu Server 11.04 and using nano to edit files
View 4 Replies
I have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
Does anyone have a link to a tutorial on how to set up a DHCP server and SAMBA as a windows domain controller? I can't really find good detailed guides by searching google.
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedThis dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedI just got DHCP working, but I need to add a "Pre-Defined Option" for the Cisco VoIP network here. At least that's what it's called in Windows. This "Pre-defined Option 150" is necessary on Windows dhcp servers tied to Cisco VoIP networks, but I have no idea where to start getting that set up in Fedora.
View 3 Replies View Relatedi have a homework where i have to set up a dhcp server on linux. I am using ubuntu. I tried following: [URL] However after running "sudo apt-get install dhcp3-server" the file "/etc/default/dhcp3-server" does not appear.
View 9 Replies View RelatedI'm curious if anybody can shed some light for me in this department. We're in a large environment with a Windows DHCP Server. We have been tinkering with LTSP on Edubuntu as thin and fat clients. It works great, but right now we just have 1 server handling the lab, which works fine unless we want to expand, which may be very possible.
These are the instructions I received:
Login to your windows server and load the DHCP configuration screen
Create a DHCP reservation for the MAC address you obtained
Add the configuration options below to enable the machine to boot from the LTSP server
017 Root Path: /opt/ltsp/i386
066 Boot Server Host Name: <ip address>
067 Bootfile Name: ltsp/arch/pxelinux.0 # Specify CPU architecture in place of 'arch', for instance 'i386'
From: [url]
I'm curious, what if I want to have multiple Ubuntu servers on the network that I want to have bootable? For example, let's say I have 3 labs, and 3 servers. Server A to Lab A, Server B to Lab B, and Server C to Lab C. I want all C's computers to boot to C, and B to B, A to A, etc.
1 - How would I add multiple entries on the Windows DHCP Server to allow all 3 (A B C) servers to boot?
2 - How would I be able to isolate the clients so ONLY Lab A clients boot to Server A, etc?
How to set up DHCP server in Redhat Linux 6
View 1 Replies View RelatedIs it possible to setup dhcp server in such a way that even if a client disconnects for a short period of time (5 - 10 minutes) the dhcp server keeps that address for that specific client and lease it back. Tracking can be done using the mac address of the client.
View 2 Replies View RelatedI decided to forgo my router's DHCP capabilites and try to make a random computer at my home take on the job.
First of all here's my network topology:
I have a cable modem hooked up to eth0 on my linux box, and this is where my internet comes from and works fine.
I also have another ethernet, eth1, which is connected to a wireless router in bridge mode. My end goal is to have my linux box sit between my internal network and the outside world. Thus it will need to act as a DHCP server, a NAT and as a firewall. Right now I'm just focused on the DHCP part.
Here is a copy of my dhcpd.conf file:
My /etc/sysconfig/dhcpd file has:
However the issue is that it is still listening on eth0. and not issuing any leases on my internal network.
What I think is happening is that it's not recognizing the 10.0.1.x subnet because my router is issuing leases on the 169.254.193.x, even though I put it on bridge mode. But I could be totally off mark.
Also running tcpdump on eth1, I can see requests coming in for dhcp, but my server isn't responding to them.
I've set up a very simple net with a dhcp + dns server using dnsmasq. It works but the server itself cant resolv clients names. Clients do resolv without any problem my /etc/dnsmasq.conf
[Code]...
is it possible to setup a DHCP server using the loopback or a virtual interface? I installed Sun VirtualBox on my fedora system and want to try and kickstart them from within the same box on a virtual network. Is this possible and has anyone done it? I only have a single NIC in the box and it is on my public network.
View 1 Replies View RelatedI my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
i have a lucid server box running a dhcp server and webmin.i want to bridge openvpn to the network that the dhcp server serves.all the configurations ive seen, id essentially have to install openvpn onto a computer underneath the dhcp server to accomplish this.
View 3 Replies View RelatedHow to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View RelatedIn my instructions for LAN boot, I am up to the next step :"You need the DHCP server software. If your distribution has none then you can use dhcp-3.1.3 and compile it."ok, so in F11 Live USB . . . I have downloaded and extracted files - they are still in Download directory . . .
Code:
[root@localhost Download]# dir
dhcp-3.1.3 dhcp-3.1.3.tar.gz
[code]....
I am trying to set up a DHCP server for a network that does not go on the Internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the Internet. No matter what I do when I try to start the dhcpd service it fails code...
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies View RelatedI have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?
View 1 Replies View RelatedI'm establishing a server that runs DHCP server, NAT gateway and VPN server. It have two physical interfaces, one for intranet and one for internet. The NAT gateway will give internet access for intranet. Another site will connect to this server by VPN. I need the server to assign a different subnet for that site other than the local site. Do anyone know how to config the DHCP server? Should I config the client classing, and how to do it?
View 3 Replies View RelatedI am trying to get custom options to work.
This is my Dhcpd.conf file
This shows that I have 3 custom option in RED.
Now when I try to pull an Ip from the 96.63.0.0/24 subnet I do not see the options in the DHCPACK from the server. The client gets an IP 96.63.0.12 but no options are present in the DHCPACK or any other DHCP transaction. I have confirmed this trhough tcpdumps on the server and client.
The server version I am using is:
The version of the DHCP server is :
Internet Systems Consortium DHCP Server V3.0.6-Fedora
turn up the level of logging that my DHCP Server is writing to SYSLOG?I can't seem to find a syslog.conf file to edit.
View 1 Replies View RelatedI'm attempting to run a DHCP server on my home network to enable PXE booting for ethernet clients, but I'm having quite a few issues getting it all up and running. I'm not entirely sure what is wrong, but I keep encountering errors in syslog as follows:
Code:
Feb 27 02:26:46 servnerr-1 dhcpd: Wrote 0 leases to leases file.
Feb 27 02:26:46 servnerr-1 dhcpd:
Feb 27 02:26:46 servnerr-1 dhcpd: No subnet declaration for eth0 (192.168.1.3).
[code]....
Networking is not exactly my strong suit, but I would like to get this up and running if at all possible.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedAfter installation Ubuntu Server 10.10 I don't know what to do next to access to the Internet.
View 9 Replies View RelatedI am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
