I have checked several tutorial sites, to no avail. I can't seem to get Winpe 3.0 to boot over tftpd/pxe.Has anyone successful done this using Ubuntu 9.10?, or am I just wasting my time trying.
I want a debian server running dhcp/tftp/pxe containing a tarball of a 'client' debian installation.I want a client that pxe boots, talks to the server, creates a ramdisk, untars the 'client' tarball to the ramdisk and boots into it. Once that's working, I want an NFS map back to the server for the users home directory.Can't find any really helpful howto's... wondering if anyone on here has done this?
When I try to pxe boot a Sun X4100 (which actually has a RHEL OS on it right now) I get the message TFTP open timeout. All traffic is allowed for port 69 udp in both directions. I do get a dhcp address. I see that both on the server and the client it gets an IP. After that I get this message in the logs:
I have tftp-server running on Centos 5. Clients which are on the same subnet as the server are able to get and put without problems. I have a client that is across the internet that is having trouble getting files from my tftp server. A tcpdump reveals that the client is requesting the same file over and over again. In /var/log/messages, I am see the following error repeated over and over until the client finally gives up.
localhost in.tftpd[12727]: tftpd: read: No route to host
I'm looking for a purely standalone TFTP server that does not make use of inetd, can be run by non-root users (at non-root port numbers, of course), and if run as root, can do chroot and switch to a non-root user to shed root privileges.
The server is booting up properly and the system is running. When browsing web sites on the sever and they seem to run fine. But when you make requests to it, it seems to take a long time to process stuff. Such as large mysql request. Even to the point it freezes. It seems that if you make a request of some sort it just over loads. I have checked the logs and the most I can get from it that one of my wiki sites that seem to be getting nailed with spam bots trying to getting which is one of the databaes that where repaired could be slowing it down A LOT. Now I did find a couple databases that where marked as crashed and they have been repaired. I am not really sure what is causes the errors since the HD space is fine, ram is fine, internet connection is fine...So I am not familiar with diagnoses linux as much as I am with a windows pc. I am not real shell friendly. I am not good with the basic troubleshooting commands to try and identify the source of the problem to correct it. Could anyone point me the way...
Thanks in advance and I apologize for being a ra-tard on these. I should know this stuff more than I do running a server like this. It was created in 2006 and has been problem free since. Another thing, mass emailing isnt working either. It may be mysqld related. Sorry for the fragments and such. It also seems the SMTP isn't working properly as well suddenly.
Another error I been seeing:
PHP Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 16 bytesPHP Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 16 bytes some times I see this as a 32 or 64 bytes as well.
FTP Connection: It is also slow when making ftp connects. It is extremly slow but they finally do complete. It can be just a simple connection to display content. Slow.
I got two computers with the exact same symptoms today: Both seem to be alive. They answer pings and they host virtual machines which are working. However, I cannot login via SSH. I get
$ ssh -v obelix OpenSSH_5.3p1 Debian-3ubuntu6, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /home/mike/.ssh/config debug1: Applying options for obelix
[code]....
On the console I can switch the ttys and enter my login credentials. After that I see the GNU/Debian Linux welcome message an no prompt. The system seems to hang. I'm able to switch the tty again and login with the same result. (I tried that three times now and I start running out of ttys.) A search on the Internet suggested some ressoucre shortage. How could I release some resoucres than? How could I further investigate the situation before just trying a hard power off?
I've got a server that I've been trying to get Ubuntu Server 10.04.01 LTS installed and running on and I've gotten incredibly close to having it work, but the Network is still giving me issues. The installer went off without a hitch (once I fixed some optical drive issues) and it has actually detected the "Intel Corporation 82576 Gigabit Network Connection (rev 01)" Dual-port onboard NIC which shows up when I run lspci. I statically assigned an IP, Subnet, DNS Server and Gateway to eth0 and things looked good. ifconfig showed that it was "UP", and I could ping localhost, but if I tried to ping anything on the LAN it said "Destination Host Unreachable".
Here's the ifconfig and lspci (snippet)
======== ifconfig ======== eth0 Link encap:Ethernet HWaddr 00:25:90:2d:26:98 inet addr:172.30.1.75 Bcast:172.30.3.255 Mask:255.255.252.0 UP BROADCAST MULTICAST MTU:1500 Metric:1
im trying to setup a tftp server on red hat linux. Ive gone through like all the instructinos online. And like i didnt get any errors or anything when typing the commands on the terminal but basically every time i try to test it i never works sooo im not really sure how im suppose to do this. basically i have a tftp in one ip address. And with another system with a different ip address using the client tftp ipaddr(server) and i try to get foo and it never connects and I tried a ping and they ping together just fine soo im just not sure if the tftp server is even on
I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP serversBut I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
Feb 23 09:47:46 eth0-eth0 last message repeated 17 times Feb 23 09:55:06 eth0-eth0 dhcpd: DHCPREQUEST for 192.168.1.53 from 00:13:20:36:26:28 via eth0: unknown lease 192.168.1.53.
This is very old topic but despite of trying out all possible solutions available on net and forums, I am not able to setup tftp server on my 2.6.32.11-99.FC12.i686.PAE. Is there something obvious missing out.
/etc/xinet.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer # protocol. The tftp protocol is often used to boot diskless # workstations, download configuration files to network-aware printers,
I'm having a strange problem on some of our Debian servers. It all started about three weeks ago when we moved our virtual environment (VMWare ESX3) from a SAN to a NAS (NetApp). At first I thought it had to do with that move but since the other 9 servers are working perfectly I eliminated that idea. For over a year all 12 Debian 5 servers have been working great without mentionable failures. All servers are (where) up to date with the latest patches. About three weeks ago I started having kernel panics with the following message on three of our servers:
Code: Code: Bad EIP value EIP [00000000] 0x0 SS:ESP 0068:f6d7da18
Kernel panic - not syncing: Fatal exception in interrupt and other times it looks like just a dump of hexadecimal data. The only difference between those 3 servers is that they have several mounted shares connecting to the NAS using CIFS. So I was thinking that it might have to do with an update of some kind in regards to smb. I recovered an image from a month ago, before the troubles began, copied over the data and MySQL databases and configured the 'old environment with recent data' exactly the same with MySQL master-master replication, document synchronization and load balancing. This task I performed last night (no other way since it's a production environment). Up to this time neither of the two 'restored' servers had a kernel panic. The one that has not been restored is having one at random about every hour and a half. Following are the different versions between the 'at this time' working server(s) and the failing one:
Do we really need the lines if I am allowing any machine to connect? And I have only 1 network card. This is acting as a dedicated TFTP server.I ask as I get an error on the get and put commands as below:
tftp> get xxx.txt tftp: error received from server <File not found> tftp: aborting
However although it gives an error it DOES GET the file.The put command however does NOT put the file. I have nobody / nogroup setup for the directory permissions as well.
tftp> put .vimrc tftp: error received from server <File not found> tftp: aborting
I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
So I'm playing around w/ some Cisco equipment and needed a quick tftp server. Go to command line and type yum install tftp-server. I get No Package available! I can clearly see it here on the i386 repo. Any ideas?? In the meantime, I'm just going to upgrade this lil 600m laptop to CentOS 6 to quickly solve the problem but I thought it was curious.
Press F12 for network service boot PXE-M0F: Exiting Intel Boot Agent. When i take tcpdump on server i see dhcp discover and dhcp offer coming and going out but no tftp request on cobbler server in var/log/messages also i am seeing dhcp offer and discover
I'm trying to access data from TFTP server which is running on my fedora 15, when i tried to read that file from TFTP path..i'm getting response as time out.. even i tried to get the data in localhost itself...there also i'm getting same time out.. i tried all permission mode.
I am trying to wade through the semanage jungle to get permissions for a tftp client. I followed the HowTos [URL] but I get the following at the client:
tftp> status Connected to 192.168.1.101. Mode: netascii Verbose: off Tracing: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp> get hello.o4 tftp: hello.o4: Permission denied
I finally figured out that the firewall directives shown at the end of the HowTo refer to semanage although the options are stated incorrectly according to the man page for semanage. I did insure that the file hello.o4 in /tftpboot has read permission for everybody.
I'm trying to TFTP router configurations to a server in the same local network without having to first make files in the server's TFTP directory . The transfer of a config file from router to server works perfectly if I make a file with touch and then chmod the file with 777. I found information that says to use the -c or --create option in the TFTP configuration file (/etc/default/tftpd-hpa) if you want TFTP to work without having to create the files first. The problem is, I have set this parameter and restarted TFTP , but it is not working.
I am fairly new to ubuntu server, I want to setup a tftp server to mount a new kernel in a DaVinci platform. I was following the guide in this page [URL]..docs/linux_tftp, but accidentally I remove the xinetd.conf file. So I think that maybe removing and reinstalling xinetd the problem will be solved, but instead of that I can't completely remove xinetd and the follow message is print in the terminal
Removing xinetd ... invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found. dpkg: error processing xinetd (--remove): subprocess installed pre-removal script returned error exit status 100 invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 100 Errors were encountered while processing: xinetd E: Sub-process /usr/bin/dpkg returned an error code (1)
with that problem I can't start the service or stop it, I am blocked in the configuration of tftp server.
Perty self explanitory, I'm trying to boot up ubunto server edition 10.10 from a USB stick (pen drive) and it works fine until step 3 when it says "Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not put in the drive. If so you can insert it and try again
Try again to mount the CD-ROM? <Yes> <No>"
I don't have an installation cd-rom! I put the .iso file onto a memory stick, inserted it into my old computer (which i will turn into a server later) , restarted it and got past the first two slides and got this error? Do I have to put the iso on a cd-rom?
We have done an installation on a blade server (HP) for RHEL4.5.
The server have an HP smart array 2200 controller and during installation it can see the controller and disks just fine.
The installation completes up to the point where the system needs to reboot , however after the reboot it does not start up again and get stuck at the message: "Trying to boot from drive c:"
We used the rescue option to mount the installation and cant find nythign wrong, even with the grub setup (except that it points to hd96 as its primary disk). we tried changing this to hd0 as well but still no luck.
After about 3 installations we are still not having any luck.
I seem to be have problems with my boot image loading. I put memdisk in the tftpboot folder, I see at least it is trying to load the boot image. When I DO NOT put the append keeppxe I get the error "failed to load udp stack". If I do put append keeppxe I get "TFTP prefix". The boot images does not load either way. What else can I try?. The boot images is 6 megs and is a Dos based menu system.
below is a copy of the menu.
default vesamenu.c32 Menu Background howtoforge_pxe.png Menu Title Rob's Pxe Boot Menu label Install Ubuntu