Ubuntu Servers :: (SDE) Sense Key - Illegal Request (Current)
Jan 3, 2011
I have an MD3000 storage attached to dell server via sas cables, running ubuntu server.
the kernel keeps throwing these messages every other second on the console, but the drives from MD are fully accessible.
Jan 3 12:04:24 node2 kernel: [71041.035822] sd 5:0:1:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 3 12:04:24 node2 kernel: [71041.035828] sd 5:0:1:0: [sde] Sense Key : Illegal Request [current]
Jan 3 12:04:24 node2 kernel: [71041.035833] sd 5:0:1:0: [sde] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1
View 1 Replies
ADVERTISEMENT
Jan 12, 2010
Tomorrow I decided to dedicate 100% of my disk to opensuse! So I backed up the files from the remaining windows partition, deleted them and expanded the /home partition. Well, I ran into some problems during first boot. I referred to an article at the wiki and fixed it. Although I did some small fixing manually at the fstab file. The system booted! But I can't browse anywhere outside the local network! At this forum I found some info regarding the dmesg |tail command. Here is my output:
biduzido@biduNote:~> dmesg |tail
[ 1256.061852] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.061865] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.061873] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.061882] end_request: I/O error, dev sr0, sector 0
[ 1256.061890] Buffer I/O error on device sr0, logical block 0
[ 1256.062662] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.062672] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.062682] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.062690] end_request: I/O error, dev sr0, sector 0
[ 1256.062697] Buffer I/O error on device sr0, logical block 0
View 6 Replies
View Related
Mar 16, 2010
After kernel upgrade to latest version I get a lot of failure messages in syslog and dmesg:
Code:
Mar 16 22:50:30 s6 kernel: [515925.148335] megasas: Failed to copy out to user sense data
Mar 16 23:07:57 s6 kernel: [516970.118242] megasas: Failed to copy out to user sense data
[code]....
View 2 Replies
View Related
Jul 25, 2011
I recently ran into the following problem when trying to ssh into my Ubuntu 11.04 server:
>> ssh user@site.com
PTY allocation request failed on channel 0
I don't know for sure, but I think this happened after one of the latest Ubuntu updates I installed. In case it's of relevance, I'm remoting in from Terminal (Mac OS X 10.7 - Lion). Edit: The problem seems to be with Lion..
[Code]...
View 1 Replies
View Related
May 5, 2011
I use Apache 2.0.55 (Ubuntu) as a document server for a business association. When the document files expire, I change the permissions so that only the owner can open them but I like to leave them on the server so that they are all in one place.
Here is my trouble--when visitors come to the site and get the directory listing, all the document files show up, whether the visitor can access them or not.
Is there some way to configure the server to not show the inaccessible files?
I guess a few technical details might help. During their useful lives, the files permissions are set to 644. Once they expire, I change them to 600. After the change, the files are still visible. Setting them to 000 doesn't help either.
It might be of note, but directories behave differently than files. If I set a directory to 600, it disappears from the listing.
View 2 Replies
View Related
May 13, 2011
Is there a way trigger a shell script after my DHCP server successfully gives out, either a specific IP address or to a specific MAC address.I have two Xbox360's in my house that both receive IP address via DHCP reservations from the Ubuntu server.I have come to accept that without having two public IP addresses getting both to have an open NAT will be very difficult. I have decided that I am OK with only one being able to have an Open NAT at a time, but I want to change the firewall rules according to which Xbox 360 turned on first. This way I can move between level in my house and play online without having to modify rules manually.
View 3 Replies
View Related
Sep 1, 2011
i've installed nagios just from a while and after i installed centreon, since this when i try to log in the web interface of nagios it shows up this message: Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.17 (Ubuntu) Server at localhost Port 80
View 1 Replies
View Related
Jun 25, 2010
how to redirect all client http request to https request in squid
View 1 Replies
View Related
Feb 1, 2010
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
View 4 Replies
View Related
Nov 10, 2009
[Note: I'm typing this entire thing out. It probably isn't 100% verbatim. And I am using an older version of the kernel because 2.6.30.9.96 was not behaving either.]
Code:
BUG: unable to handle kernel paging request at efd86f5c
*pde = 00000000
[code]....
View 2 Replies
View Related
Feb 18, 2011
So since i have installed linux, I have been ready about how virus are not nearly as likely to infect linux system as windows, i am running a dual-boot though and import my profile and have a lot of my files from windows system on linux, can they potentially be infected in the windows sense?
View 2 Replies
View Related
Feb 9, 2011
I have Ubuntu Server 10.04 Lucid (LTS) installed on my server (EC2 instance). I'd like to install Memcached on it. When I type "sudo apt-get install memcached" I get version 1.4.2-1ubuntu3 installed.
I know there's a newer version 1.4.5 and looking at [URL]..I found it's available in the newer version of Ubuntu (Maverick). Question: is it possible to get the newer version 1.4.5 using apt-get on my current server?
View 1 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Feb 13, 2010
I need to downgrade curl (newest version has a bug I can't get around) and I'm not exactly sure how. I have removed curl (sudo apt-get remove php-curl), and downloaded and installed (./configure, make, make install) the version I need and everything looks fine for that. However, my phpinfo page doesn't show curl support anymore, so I assume I need to recompile php with curl support. My question is, how do I recompile php with all the current settings it has now? I used apt-get to install it with a bunch of other packages, so I'm not really sure what arguments to use when I recompile it. Is there a way to print the current settings?
View 7 Replies
View Related
Jun 23, 2010
Now that Ubuntu is at a LTS stage with Lucid and is easier to install PV in XenServer, I have been wanting to drop my current debian VM nodes in favor of Ubuntu 10.04. So far I have DRBD8 and OCFS2 all working nicely as primary/primary and I am on the next stage of my setup by installing ldirectord and heartbeat. Can anyone shed some light on heartbeat-gui (hb_gui) as it no longer seems to be in the repositories (since Jaunty)?[URL].. I understand that Lucid now uses pacemaker as part of a clustering suite but I have no idea if I really need it. I really liked being able to run hb_gui and logging into the heartbeat cluster to manage resources via point and click so if anyone has any hints on replacements or newer preferred methods to accomplish the same tasks via point-n-click,
View 1 Replies
View Related
Oct 19, 2010
both audio inputs (I use the integrated mic on my notebook) and jack-sense (integrated speakers/headphones) work properly, as they should. But after some time (from few minutes up to several hours) both of them cease to work simultaneously. After that the mic input levels turning gray and speakers don't work at all (when headphones were connected at that moment) or speakers don't mute when I connect my headphones (if headphones were not connected then). After I reboot, everything is okay again for some time, but then it happens again. Setting mixer levels manually with alsamixer doesn't help at all. I also tried different snd-hda-intel model settings in alsa.conf, but that just made things messed up, so I stayed with auto setting. This way everything (inputs/outputs/sense) works as should until it simply stops working.
It's maverick, ALC268, ATI Azalia (Intel HDA), alsa 1.0.23, but I had this problem with karmic and lucid as well when I tried them. Now I want to switch from Win7, but this is the only thing keeping me from it.
View 1 Replies
View Related
Nov 26, 2010
I'm using an Acer Aspire 5536g and Ubuntu 10.10 x64. I can't get any sound from my mic with PulseAudio installed and the headphone jack sense function doesn't work either - when I plug my headphones I get sound from both them and my built-in speakers. I don't have any problems with PulseAudio removed.
View 9 Replies
View Related
Jun 30, 2011
Does it make sense to run sshd confined/protected by apparmor? I get tons of attack/hack attempts on my ssh port daily, I created a white list on my firewall to specify the IP addresses that can ssh into my network. I was also thinking of activating the sshd profile in apparmor for some added protection?
View 5 Replies
View Related
Sep 4, 2011
Wallpaper, with a complimentary color scheme for windows decoration, and icons and sound effects inspired thereby, loaded as a set. Is there an app that does this for KDE? It seems like linux gives me more options, but without an important tool to utilize them. I'm sorry to bring a question here that's probably been asked many times over the last dece, but the likely hits on "theme" and "windows" has overwhelmed my search fu.
View 4 Replies
View Related
Apr 11, 2011
Please help me to increase web traffic to my site and need hit for ad-sense.
View 1 Replies
View Related
Jul 11, 2011
I've been trying to install the latest updates on my Ubuntu 10.10 system but keep getting the same error in Update Manager and the terminal:
Code:
dpkg: file triggers record mentions illegal package name I've tried running sudo dpkg --configure -a and sudo apt-get upgrade -f after running sudo apt-get update but to no avail.
After searching the forum and google I haven't been able to find this issue or a solution to a similar issue that works for my problem.
View 9 Replies
View Related
Feb 5, 2010
At home I'm currently running Hardy on a desktop machine and Jaunty (Eeebuntu) on an EeePC. I often connect the desktop to the internet via a cellphone as modem. I also often connect the EeePC to the desktop via crossover cable and SSH into the desktop so I cam watch video files from the desktop on the EeePC from the sofa or bed.
I'd like to be able to use the desktop's internet connection from the EeePC. This means I have to set up the desktop so the EeePC can share its connection - this involves setting up the desktop as a gateway I believe?
Looking around for info on how to do this, I found this guide [URL]...in-ubuntu.html - but unfortunately it seems this guide has not been written correctly. It repeats itself in one section (below: repeated section in bold):
[Code]...
View 2 Replies
View Related
Mar 1, 2010
The audio plays both on speakers and headphones, try all varients of snd-hda-intel model=[ref, auto, dell, dell-bios, etc] but doesn't fix this problem.
cat /proc/asound/card0/codec#* | grep Codec
Codec: Conexant ID 5067
Laptop: Vostro 1014
OS: Jaunty
Kernel: 2.6.28-18-generic
ALSA : 1.0.18-ubuntu11
View 2 Replies
View Related
Apr 25, 2010
Gateway m275 with Fedora 12 is unable to read DVD+RW media. Media is recognizable on DVD+RW drive.
What do I need to set to make it readable or is the problem the media type?
View 1 Replies
View Related
Jun 18, 2011
I want to search a bunch of files in Ubuntu to find the ones that have file names which Windows won't allow. There is too many to do it manually.
View 1 Replies
View Related
Jan 23, 2011
I'm trying to build a shared library, and am receiving several undefined reference linking errors. Specifically, ffmpeg linked with libx264. I'm aware that this is not an appropriate forum for questions specific to ffmpeg or libx264. In order for one library / application (ffmpeg) to reference another library (libx264), the linker has to know where the referenced library (libx264.so) is located in the file system.
I'm pretty sure the linker knows where libx264.so is, because I receive a different error message when I run ffmpeg's configure script if the linker can't find libx264.so. In general, should running the install target of a make file be preferred over specifying the appropriate paths in the CFLAGS and LDFLAGS environment variables? I've tried both, and it doesn't seem to make a difference in regard to my error which method I choose.
How exactly is a library referenced? My error messages are
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d26'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d22'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d2'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d20'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d24'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `d0'
/root/ffmpeg/libavcodec/libavcodec.so: undefined reference to `q1'
If I can find out what library 'd26', 'd22', etc. are declared in, I should be able to resolve the undefined references. What exactly are 'd26', 'd22', etc.? Are these functions, classes, or something else? How can I find out what functions / classes are defined in a particular library?
View 2 Replies
View Related
May 26, 2011
I noticed my Internet slows to a crawl when I'm running bittorrent, but when I look at my torrent app (Transmission), the upload/download speeds are mere kilobytes per second, and my Internet has much higher bandwidth capabilities than that.So I tested it:No torrent running
(ping: 13 ms, down: 11.39 mb/s, up: 2.80 mb/s)
Torrent running
(ping: 752 ms, down: 4.30 mb/s, up: 0.19 mb/s)
[code]....
View 5 Replies
View Related
Jun 23, 2009
After I installed a gigabit router, I could not access my nfs server anymore; I tried with the previous physical set-up and all was OK so clearly it is the new router that is the disturbing factor. After some (and then some) experimenting, it would appear that the following specific feature needs to be enabled: Filter Internet NAT Redirection This feature uses port forwarding to block access to local servers from local networked computers. Select this feature to filter Internet NAT redirection. It is not selected by default.
The reason I had simply looked over it is that I did not see how internet nat redirection could be related to the local network. As I read the details, it became clear that it really is but it also raised new questions. Have I now allowed just anyone on the internet to access to my nfs server? Because the description is not very clear either as it mentions both internet and local network. And what is that odd terminology? Filtering allows access, not filtering does not - that seems like the world upside down ...
View 2 Replies
View Related
Dec 22, 2010
I use Ubuntu 10.10 and setup Proftpd apps which I would like to use to access to my files from outside of my SOHO LAN network. This is work on LAN very well but from outside I get some error msg. However I establish connection with my Ubuntu FTP Server machine but I can't get list of files and folders on server.
I get this error msg:
227 Entering Passive Mode 89,216,116,8 243,96 --> i know what this no means: my Stat IP and the port
500 Illegal Port Command
Get Directory
FTP Port Command failed
Some Additional Information:
On the edge of SOHO LAN i use Cisco router for access to the Internet.
NAT is configured, PAT (NAT overload) is configured also.
I forward ports which I needed for FTP: 21 and 20, and passive ports 60000 - 60001.
When I use Windows OS and BUlletProof FTP server (port 21 or some custom port i.e. 65021) I only forward that port (21 or custom port i.e. 65021) and everything works great.
View 1 Replies
View Related
Oct 12, 2009
I just upgraded Fedora 10 to Fedora 11. When I rebooted I just had a flashing cursor. So I typed Ctrl-Alt-F2 to open a console window on booting. That worked fine. I was going to edit xorg.conf because I suspected the problem was related to haveing installed the latest Linux NVIDIA drivers (and custom kernal) in Fedora 10 before upgrading to Fedora 11. But, I decided to edit the run level in /etc/inittab first. Unfortunately, I fat fingered run level 3 to runlevel 333. No when booting I get hung up with the error "telinit: illegal run level 333". When I try to use Ctrl-Alt-F2 to open a console window on booting now it doesn't work. How to get into a console window with this error?
View 1 Replies
View Related
