OpenSUSE Install :: Unable To Handle Kernel Paging Request At Ffffc90010b8000?
Aug 3, 2010
I've been trying to install Opensuse 11.3 from the Kde live cd, but the installation hangs when I'm almost done. Right at the beginning the installation is interrupted right with text that among other things says:
Bug: unable to handle kernel paging request at ffffc90010b8000. After a while though, the installation picks up and continues by itself. I'm then able to complete the necessary steps and I reboot the system so that it can complete the installation.
After reboot there is a new text message that says that the bios does not support EEC memory or something to that effect and then continues with the installation. When it has completed 82% of the autoconfiguration the installation just stops and stays that way.
I've had no problem installing previous releases, from 10.2 up to 11.2, on the same machine.
I've checked md5 sum and also checked the media before proceeding with the installation.
Upon reboot after the first installation step, I also tried the failsafe mode but got the same result.
View 9 Replies
ADVERTISEMENT
Apr 8, 2009
I am trying to install CentOS 5.3 on a computer where I successfully installed Windows XP.
Booting from the DVD I got the following error:
[<c0458f3c>] serial8250_init+0x6d/0xe4
[<c041abd4>] init+0x25/0x69
[<c041f46b>] ret_from_fork+0x1eb/0x73c
[<c04597eb>] init+0x181/0x19b
[Code]....
View 11 Replies
View Related
Apr 16, 2011
Does anyone have any idea what this is? I'm running F14 kernel 11-83, everything else is rock solid but I get this crash randomly, sometimes it runs for days no problem other times it crashes within a few hours.Someone recommended I run memtest86, I did for 24 hours and it showed no problems.
View 6 Replies
View Related
Nov 10, 2009
[Note: I'm typing this entire thing out. It probably isn't 100% verbatim. And I am using an older version of the kernel because 2.6.30.9.96 was not behaving either.]
Code:
BUG: unable to handle kernel paging request at efd86f5c
*pde = 00000000
[code]....
View 2 Replies
View Related
Apr 30, 2009
Here's the text from the serial console before I rebooted:
BUG: unable to handle kernel paging request at ffff8140320234b8
IP: [<ffffffff802b0a13>] dentry_iput+0x26/0x9d
PGD 8063 PUD 0
[code]....
My root server is using CentOS release 5.2 (Final), kernel 2.6.26.5-rootserver-20080917a, SMP, 64-bit This Oops happened yesterday and before that it happened on March 14th of this year, and before that on January 31st of this year, so a repeating pattern. On the January 31st Oops, I just rebooted. On the March 14th Oops, I reformatted the two swap partitions as follows: mkswap -c /dev/sda2; mkswap -c /dev/sdb2 On this last Oops, I turned off the swap for 24-hours, then decided to turn it on again after doing the above mkswap again. During the previous uptime, I had dumpcap packet capture running, but this last reboot, I'm not going to run it.
View 1 Replies
View Related
Jun 15, 2009
all of the following are made through live usb creator. when i tried with F11 i686 live kde, I got the following error: Bug: unable to handle kernel when i tried with F11 x86_64 live kde then at the time of installation my screen got blurred.
View 4 Replies
View Related
Nov 17, 2009
I am trying to install F12 on a Dell Latitude E5400 laptop. It got through the whole install process, but when it rebooted i just get a screen that says
"unable to handle kernel null pointer dereference"
and it just hangs there.
View 2 Replies
View Related
Jun 21, 2009
since upgrading to Fedora 11 I keep getting this error:
Code:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000041
IP: [<ffffffffa01fab94>] sync_request+0x1/0x8de [raid456]
PGD 49435067 PUD 494f6067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/virtual/block/md0/md/sync_speed
CPU 0
Modules linked in: ip6table_filter ip6_tables ip6t_REJECT nf_conntrack_ipv6
[Code]...
View 1 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Dec 10, 2009
Using the defaukt x86_64 kernel openSuSE 11.2 (uograded from 11.1) works fine.
I have compiled my own kernel using the 11.1 config with minor changes. Botting runs fine and looking at the boot.msg compared between the default and my own kernel I only see preloadtrace.ko module missing on my own kernel which I would not expect causing mthe problem.
After the boot I am unable to login on the X login screen, text console or ssh.
The X login hangs after I entered username/password. Th elogin box disaapears and the backgroundscreen remains.
On the text console (after stopping xwindows via CTRL-Backspace) I can enter the username but the password prompt will not appear.
On ssh, where I login via plublic key I will get a message that the key will be used for login and then the session hangs as well.
View 9 Replies
View Related
Nov 9, 2010
I am unable to boot the xen kernel but can boot the desktop kernel. The machine boots and the last message I see is:
(Xen) Created cpupool 0 with Scheduler SMP Credit Scheduler (Credit)
After this the screen just turns into a random mess. It looks like graphics memory is pointing at a area of memory filled with random data. The computer actually boots but the display is unusable and the keyboard fails (num lock doesn't work). I can cleanly halt by pressing the power button and waiting for disk activity to stop. After reading several other threads I've tried various combinations of vga=mode-0x0f00 and nomodeset but the result is always the same. I've set the vga mode to 0x0f00 as I actually get to see up to the "Created cpupool...." in this mode. The system boots without any issues with opensuse 11.2.
I'm using a gigabyte GA-Q35M motherboard and the output from lspci is:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) .....
View 7 Replies
View Related
Oct 4, 2010
Yesterday I updated openSuse 11.3 on my laptop. Kernel update from 2.6.34.4-0.1... to 2.6.34.7-0.3-desktop was included. Yast performed fine and at the end it stated to reboot for using the new Kernel. So I did, but what a bad surprise!! Normally the Grub menu should have been updated, but not this time. Fortunately I know how to handle this, but not all users will be able to resolve this problem, so here's what to do if this happens to you: You will run into the Text console saying: Press any button to continue... Before doing this write down on a piece of paper the text lines visible on the screen, starting with:
kernel /boot/vmlinuz-2.6.34.4-0.1-desktop root=/dev/disk/by-id/ata-Hitachi....... resume=/dev/disk........
or whatever it reads for your system. You will need this info to edit the menu and succeed to boot. Now press any key and you will get the Grub menu. The standard option will be highlighted. press "e" to edit that option. Next you will see the Grub menu lines
First press key "o" to add a new line, select it by arrow down, press "e" to edit the line. (In my case it was not possible to edit the full original line, but only the added options like vag=0x317) Enter the line you wrote down, but change the kernel's version number to the new one Should look similar like:
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Hitachi.......
(it works if you only use the part before "resume=/dev/disk....") After finishing hit Enter and you will turn bach to the Grub menu lines. Now move with the up/down arrow key to the old line, press "d" to remove the old line. Next move to the line with "initrd /boot/initrd-2.6.34.4-0.1-desktop", press "e" and edit the line so that it reads: initrd /boot/initrd-2.6.34.7-0.3-desktop press Enter to move back to the Grub menu lines. Now press "b" to boot. After booting log in, open your file manager as root, browse to /boot/grub and open the menu.lst file to edit and change the kernel old version numbers to the new one. Save it and next time it your machine will boot normally again.
View 1 Replies
View Related
Apr 25, 2011
This is completely baffling me..I have a Lenovo Thinkpad X301, which has been running OpenSUSE 11.1 for a while, with vanilla kernels from kernel.org, built and installed in the standard (i.e. not SUSE) way.
A week ago, I dupped to 11.2, and also installed kernel 2.6.38.4 . This was compiled with the gcc-4.3 available under 11.2. Everything worked fine (after the necessary messing around to get X working again).
This weekend, I dupped to 11.4 (via 11.3, of course). After more messing around to get X working again, things were working ok - using the same 2.6.38.4 kernel I'd built under 11.2. I then re-built the kernel. It appears to compile and install ok, and I haven't changed the configuration or the grub configuration. However, it doesn't load. Normally, I just get a blank screen after grub starts it loading. If I boot in basic VGA mode 0, then I get a few lines of messages before it hangs - it hangs complaining about APIC not connected to io bios, and if I boot noapic, it gets a few lines further before hanging after some message I don't know about (allocating 4 HET). I don't suppose that's relevant, anyway.
I've tried three different gcc versions, and two different linux versions (2.31 as well), and the same thing happens. This sounds like something going badly wrong with ld or as or something - but I don't see how anything could have happened that wouldn't have been noticed by thousands of others.
View 5 Replies
View Related
Mar 2, 2010
I can not install files RPM, says there is error in the request.
View 1 Replies
View Related
Mar 9, 2010
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
View 7 Replies
View Related
Feb 4, 2011
openSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250
Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.
Can I make the blank VGA options permanent?
View 5 Replies
View Related
Jun 21, 2011
I am new to Linux and I'm trying to install OpenSuse on my machine:
AMD Athlon 64 3200+ / 2.0 GHz
ATI Radeon Xpress 200
512.0 MB DDR SDRAM
ATI Radeon Xpress 200 Shared video memory (UMA)
DVD-RW 16X TSSTcorp CD/DVDW TS-H552B drive
Western Digital WD3200AAJB 320GB Hard Drive
I downloaded the ISO for version 11.4-i586 DVD size from DirectLink on opensuse.org. I checked the Windows MD5CHECKSUM and verifyied it. The installation goes fine until it begins installing packages when it prompts:
"Insert Disc 1"
Which I believe is the Disc that I burned already with the ISO file and is in the DVD-ROM drive that it's asking for. This happens for several files, and prompt me to either
retry/skip/abort/cancel
If I click Retry I get "media1.media not found" or a similar message. If I click Abort/Skip/Cancel the installation stops and takes me to a text version of the installation which then stops and says that it can not find the Installation Package either.
I have looked for reasons behind this but all I could find was possibly Mounting the DVD-ROM but the installatin runs fine until it begins looking for specific files and says it can't find the files on the Disc, even though it's in the DVD drive.
View 6 Replies
View Related
Sep 2, 2010
I recently decided to try out OpenSuSE after a few years of using kubuntu. However, upon lanuching the install disk I get the following kernel panic: "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(3,1)". I am using the 64-bit DVD install and I have verified the md5 of both the download and the disk itself. The specs for my computer are:
Core 2 Q6600
4gb ddr2 RAM
MSI P6N-SLI motherboard
Nvidia GTX 480
View 9 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
Jan 27, 2010
I need to understand southbridge related code in linux source code.
For that I have downloaded Linux source code version:2.6.28 .
I have seen the code but didn't find code specific to southbridge handling.
Is Linux source code contains southbridge specific code?If so where can I find the code?
View 7 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Mar 20, 2009
A FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
View 1 Replies
View Related
Oct 19, 2009
I'm wondering if there is any application being able to handle compressed SWF files. If I try it with mencoder (mplayer), it tells me:[swf @ 0x91a0a30]Compressed SWF format not supported No way in Fedora Core 11?
View 3 Replies
View Related
Jun 14, 2010
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
View 2 Replies
View Related
Jun 19, 2010
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
View 3 Replies
View Related
Jun 25, 2010
how to redirect all client http request to https request in squid
View 1 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
Feb 11, 2010
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies
View Related
Jul 21, 2010
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
View 1 Replies
View Related
Sep 1, 2011
i've installed nagios just from a while and after i installed centreon, since this when i try to log in the web interface of nagios it shows up this message: Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.17 (Ubuntu) Server at localhost Port 80
View 1 Replies
View Related
