I'm trying to install citadel server on ubuntu server 10.04 via apt-get install citadel-server. I get an error at:setting up citadel-server (7.71-1)export: 106: 007: bad variable namedpkg script exits with error code 1.would this be due to unmet dependency?WalterPS. filed a bug in launchpad
View 2 RepliesI am running an installation of Scientific Linux 6.0 (it is literally RHEL 6 minus the brand), and have successfully setup Citadel Groupware, and synced it with a Mozilla Thunderbird client with the Lightning calendar extension. It is very nice!
However, for the Citadel server to sync with my iPhone, I need to, and have have downloaded and successfully started the latest Groupware Sync Server from here. The Groupware Sync Server is basically an installation of Funambol, specially made to work with Citadel.
I tried to connect to the server from my iPhone with the Funambol connector app, and the Synthesis SyncML app, but none of them worked when I pointed them to: http://[hostname]:8080/funambol/ds (which is what the Groupware Sync Server documentation told me). Of course, I replaced [hostname] with my actual hostname.
I checked the logs of both sync apps, and they both say the following:
Quote:
[ERROR] processItemStatus: server sent status 506 in SYNC
[ERROR] Error #506 in source addressbook
On the Citadel and Groupware Sync Server forums, I was told that error 506 meant its something on the server going on, so I got the two relevant log files, /opt/Funambol/logs/ds-server/ds-server.log, and /opt/tools/tomcat/logs/catalina.out (the links point to pastebins of the output).
What does "error 506" mean, and how do I correct it?
BTW, I disabled my entire firewall just in case that was the issue.
I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I am looking to use Citadel in my machine, some questions come to mind before I install it again on my new server.
Can this tool support phpBB sending mail for activations etc?
Can I use CLI mail commands?
I have noted it can support a vast number of domains.
Code:
kenny_strawn@kenny-AOA110:~$ sqlite3 -html -line /var/www/fluxbb/ProprietarySuckware 'select o_base_url from memos'
Error: unable to open database "/var/www/fluxbb/ProprietarySuckware": unable to open database file
kenny_strawn@kenny-AOA110:~$
This database was automatically generated by FluxBB, so I am wondering just why it isn't opening.
I have installed the synckolab add-on in thunderbird to synchronize with my citadel server. The calendar and tasks in te server are synchronized to my client, but not the other way round, i.e. the changes in thunderbird are not written to citadel. Contacts get synchronized ok, in both directions.
Setup is:
Has anybody on this list set up a working synchronization of calendar and task items with synckolab?
know this is vague but I reallydont know much about securityhow secure is the citadel server
View 2 Replies View RelatedI'm running Ubuntu 8.04.4 LTS to host a moodle server in a school.. moodle is running OK - but I'm having problems with MySql Any mysql command generates:
unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'
I've taken a look in unknown variable 'pid-file=/var/run/mysqld/ and there is no mysqld.pid file I have followed these instructions that I found elsewhere:
If there�s no mysqld.pid inside /var/run/mysqld directory, create mysqld.pid
# cd /var/run/mysqld
# touch mysqld.pid
[code]....
But after reboot the mysqld.pid file is missing again.. I can access mysql via phpmyadmin - but webmin fails with unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'
I am running 8.04 Server on a VPS. I have installed Citadel. I also have some web pages that use sendmail for contacts.I see my mail.info logging a lot of the following entries.
Code:
mail sendmail[14051]: o0GNe7bS014051: from=smmsp, size=404, class=0, nrcpts=1, msgid=<201001162340.o0GNe7bS014051@mail.server.com>, relay=smmsp@localhost
[code]...
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View RelatedI'm running ubuntu 10.04 as a server that hosts a website and our email. I set up the email (Postfix) to work with Dovecot to enable IMAP and POP support.The mails can be retrieved and sent through this server with no hassles. We just have an issue that all emails sent via a client to any other address (be it on the same domain or not) will return to the inbox of that client.So basically, I open MS Outlook. Click new message and send it off to my GMail address. After I send it, it pops into my inbox on Outlook (stating that it came from me). The intended recipient also gets the message.
View 2 Replies View RelatedSince /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...
me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!
Running start_navicat script in kubuntu 11.04 returns bash error ./start_navicat: 10: arithmetic expression: expecting EOF: "2*100+13 2". The same navicat version runs fine in ubuntu 10.10 and 10.04. I tried deleting navicat folders - including hidden folders and reinstalling, but get the same error.Can't test ubuntu 11.04 because i can't get it running (black screen - even grub). xubuntu 11.04 is very unstable too. kubuntu 11.04 is very stable otherwise.no idea what to do, other than continue using ubuntu 10.10 (which is the best ubuntu version to date imho)
View 5 Replies View RelatedI am unable to run firefox on my Hp mini 110 running FC14. This happened, I think, after an update that I have done.
When ever I run firefox I get the following messages.
Code:
I am using Fedora 14 (64 bit version): Can't Start XAWTV. Returns the error.
$ xawtv
This is xawtv-3.99.rc6, running on Linux/x86_64 (2.6.35.12-90.fc14.x86_64)
xinerama 0: 1920x1080+0+0
WARNING: No DGA direct video mode for this display.
WARNING: keeping fbuf pitch at: 7680, as no base addr was detected
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
v4l2: WARNING: framebuffer base address mismatch
v4l2: me=(nil) v4l=(nil)
Warning: Missing charsets in String to FontSet conversion
Warning: Missing charsets in String to FontSet conversion
Oops: can't load any font
I have a service on my Suse 11 server which runs an ssh command (using openSSH) on another box.The output below is returned, but legitimate output is also returned as if the command had executed successfully. For example, the service executes an ls command through ssh, gets the error below, but also the contents of the remote directory as output. This is a problem because the service retries the command until it receives no error. I have been unable to replicate this manually from the command line. Does anyone know what might cause this or what this error really means?
View 5 Replies View RelatedI'm running Ubuntu 10.04 with a complete LAMP installation (for local developement purpose).
Everything is OK (I installed phpMyAdmin without problems) except for one big problem: php shows 500 server internal error instead of a complete error report.
I tried editing php.ini and in-script runtime configuration but nothing changed.
I have a function in my SOAP server that returns an array. When the client calls this function, it only receives "array", and when I use foreach to print each member of this array, it tells me that this is not an array. If I change the returned value of the function to a string or integer type everything works fine though, so I don't think that there is any problem with the client.I am using NuSOAP library on php to achieve that.I had doubt when declaring the type of return value of the function. In XML schema there is no array type, so I specified the return value as a string like this:
PHP Code:
$server->register("getLocation",
array('country_population' => 'xsd:string',
[code]....
I'm simply trying to compile a vanilla kernel from Kernel.org, I've done it before, however "make menuconfig" returns an error after I've made my changes to the config file.
Code:
Why is make returning that error? I am using a 64-bit kernel.
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
I have installed in my opensuse 11.4 the kdesvn.
When I press the checkout button the program crashes and returns the following message:
I have a new Debian Linux 6.0 server installed, running Linux 2.6.38.3-linode32 on i686. It has apache2 on front.
The master plan was to run Railo on this one, so I can continue my mad Coldfusion schemes to rule the world, so got the tomcat set up with it, as instructed by some guy I met on a chat. He seemed very reliable.
I got the whole thing working, can view my regular html files and whatnot, but as soon as I try to run a cfm file,
I get an error message on screen:
I have no idea whatsoever what to do next. This is my site with the html file:[url] and here is my test index.cfm file:[url]
I'm having a little problem here. That, or I'm missing the obvious staring me in the face. I have this file server, called toad. I nuked it's system disk, reorganising the partitions and upgrading to openSUSE 11.3 x64. I installed vsftd with "Yast FTP server", and the config looks OK. I even compared it with that of another machine. But when I try to connect, this is what I get:
user@mainmachine:~> ftp
ftp> open toad
Connected to toad.geuens.org.
500 OOPS: could not bind listening IPv6 socket
I'm prettige sure IPv6 is deactivated. The firewall is disabled on both machines. I've looked this over again and again. Can't find it. It's not the connecting machine, I've tried from another.
The system is Debian Squeeze/Sid with apt.conf set to Squeeze as the default. Most packages are from Squeeze.
I ran apt-get upgrade and it returned an error-code.
It might be it is this bug: Bug#574153: python-pkg-resources: Missing file leaves it unconfigured
I tried aptitude install -f, to hold it and to remove the package python-pkg-resources, but i am getting told the package would be in a very bad stage, and i should re-install it. That doesn't work.
I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies View RelatedI am trying to install wxpython from source package when ran ./configure command it came up with a strange message which says
Code:
Code:
For some reason the script below works fine when I run it directly but when I run is using source, I get a not found error?
With source: (line 11 is where the 'test' statement is)
Quote:
gtonder@sydlnx03:~> source set_aliases.sh -v 11:31AM
1
set_aliases.sh
[Code].....
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I am trying to convert a file using ffmpeg. I have this following code in a terminal.
ffmpeg -i introvideofinal -vcodec libx264 -acodec libfaac introvideofinalfinal.mp4
It returns an error dealing just with the h264 codec saying that I need to use a vpre parameter? I can't find any documentation on using the vpre parameter.
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.