Fedora :: Firefox Will Returns An Error
Mar 11, 2011I am unable to run firefox on my Hp mini 110 running FC14. This happened, I think, after an update that I have done.
When ever I run firefox I get the following messages.
Code:
ADVERTISEMENT
Fedora :: XAWTV Cannot Run - Returns Error
May 9, 2011I am using Fedora 14 (64 bit version): Can't Start XAWTV. Returns the error.
$ xawtv
This is xawtv-3.99.rc6, running on Linux/x86_64 (2.6.35.12-90.fc14.x86_64)
xinerama 0: 1920x1080+0+0
WARNING: No DGA direct video mode for this display.
WARNING: keeping fbuf pitch at: 7680, as no base addr was detected
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
v4l2: WARNING: framebuffer base address mismatch
v4l2: me=(nil) v4l=(nil)
Warning: Missing charsets in String to FontSet conversion
Warning: Missing charsets in String to FontSet conversion
Oops: can't load any font
Fedora Hardware :: Fans Wont Stop - Pwmconfig Returns Error ?
Oct 8, 2009I am running Fedora11 on a brand new HP Pavilion Elite, and the fans just won't stop running at full speed.
I have tried
Code:
Which told me lm_sensors was already installed.
Next I did
Code:
Taking the default answer to all questions asked.
Doing
Code:
Gives me something like this:
Which I suppose are normal values, which do not require fans spinning at full power.
However,when I do
Code:
I get this output:
OpenSUSE Network :: NFS Server Returns Error For Client Mount Calls - Error 13
Mar 21, 2011I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
Networking :: Internet By Pinging Outside IP's But Firefox Browser Returns Cannot Locate Www
Mar 9, 2009Installed Fedora 10 with Mozilla-Firefox, I can get out on the internet by pinging outside IP's but Firefox browser returns cannot locate www. does anyone know what package I need so browser connects.
View 7 Replies View RelatedFedora Security :: Send An Email Using Evolution The Message Was Not Sent But Returns A Error Message?
Apr 30, 2009Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedFedora :: ATI Catalyst Control Returns "Bus Error" Kernel 2.6.30.9-90?
Oct 28, 2009i find it refreshing to give things a clean start when new kernels arrive... the net install is very satisfying...except when sad things happen with new kernels... let's talk about 2.6.30.9-90 2.6.30.8-64 was a solid and reliable kernel... with hardly a bug...things were working smoothly...... with the latest and greatest 30.9-90 we find that ATI's Catalyst Control ( amdcccle ) fails to run...
Code:
[HMSS013@Apple ~]$ amdcccle
Bus error.
OpenSUSE :: Ssh Command Returns Error?
Feb 26, 2010I have a service on my Suse 11 server which runs an ssh command (using openSSH) on another box.The output below is returned, but legitimate output is also returned as if the command had executed successfully. For example, the service executes an ls command through ssh, gets the error below, but also the contents of the remote directory as output. This is a problem because the service retries the command until it receives no error. I have been unable to replicate this manually from the command line. Does anyone know what might cause this or what this error really means?
View 5 Replies View RelatedSoftware :: Kdesvn Returns A Nasty Error
Jul 27, 2011I have installed in my opensuse 11.4 the kdesvn.
When I press the checkout button the program crashes and returns the following message:
Debian Configuration :: Railo Cfm Pages Returns 404 Error
May 21, 2011I have a new Debian Linux 6.0 server installed, running Linux 2.6.38.3-linode32 on i686. It has apache2 on front.
The master plan was to run Railo on this one, so I can continue my mad Coldfusion schemes to rule the world, so got the tomcat set up with it, as instructed by some guy I met on a chat. He seemed very reliable.
I got the whole thing working, can view my regular html files and whatnot, but as soon as I try to run a cfm file,
I get an error message on screen:
I have no idea whatsoever what to do next. This is my site with the html file:[url] and here is my test index.cfm file:[url]
OpenSUSE Network :: FTP Connection Returns IPv6 Error
Nov 1, 2010I'm having a little problem here. That, or I'm missing the obvious staring me in the face. I have this file server, called toad. I nuked it's system disk, reorganising the partitions and upgrading to openSUSE 11.3 x64. I installed vsftd with "Yast FTP server", and the config looks OK. I even compared it with that of another machine. But when I try to connect, this is what I get:
user@mainmachine:~> ftp
ftp> open toad
Connected to toad.geuens.org.
500 OOPS: could not bind listening IPv6 socket
I'm prettige sure IPv6 is deactivated. The firewall is disabled on both machines. I've looked this over again and again. Can't find it. It's not the connecting machine, I've tried from another.
Ubuntu :: Start_navicat Returns Bash Error In Kubuntu 11.04?
May 13, 2011Running start_navicat script in kubuntu 11.04 returns bash error ./start_navicat: 10: arithmetic expression: expecting EOF: "2*100+13 2". The same navicat version runs fine in ubuntu 10.10 and 10.04. I tried deleting navicat folders - including hidden folders and reinstalling, but get the same error.Can't test ubuntu 11.04 because i can't get it running (black screen - even grub). xubuntu 11.04 is very unstable too. kubuntu 11.04 is very stable otherwise.no idea what to do, other than continue using ubuntu 10.10 (which is the best ubuntu version to date imho)
View 5 Replies View RelatedDebian :: Python-pkg-resources Returns Error Code
Apr 9, 2010The system is Debian Squeeze/Sid with apt.conf set to Squeeze as the default. Most packages are from Squeeze.
I ran apt-get upgrade and it returned an error-code.
It might be it is this bug: Bug#574153: python-pkg-resources: Missing file leaves it unconfigured
I tried aptitude install -f, to hold it and to remove the package python-pkg-resources, but i am getting told the package would be in a very bad stage, and i should re-install it. That doesn't work.
Hardware :: Installing Ethernet Driver Returns Error
Mar 22, 2011I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies View RelatedGeneral :: Installation Of Wxpython Source Returns - Error
Jan 19, 2010I am trying to install wxpython from source package when ran ./configure command it came up with a strange message which says
Code:
Code:
General :: Shell Script Returns Error When Using 'source'
Mar 21, 2011For some reason the script below works fine when I run it directly but when I run is using source, I get a not found error?
With source: (line 11 is where the 'test' statement is)
Quote:
gtonder@sydlnx03:~> source set_aliases.sh -v 11:31AM
1
set_aliases.sh
[Code].....
Debian Multimedia :: Libao2 Or Libao4 Returns Dpkg Error
Apr 6, 2010I ran into this:[url]
I tried to ignore it (yesterday it made me remove xmms2-plugin-all, i could have lived with that for a few days), but it is getting worse: gnomebaker, mpg123, vorbis-tools, cdrdao, etc.
So i remove beloved apps , run aptitude install -f and what not. The result is that either libao2 or libao4 give me trouble (depending which version is installed at that moment).
After the upgrades are available again it's big fun over here. Is it just me or are others running in a lot of "dpkg returned an error message" too? The first time ever i got to use aptitude to get problems solved. Gnome terminal gives me segmentation fault but no error messages. And so on.
Ubuntu :: Make Menuconfig Returns An Error In Kernel Compilation
Jul 12, 2010I'm simply trying to compile a vanilla kernel from Kernel.org, I've done it before, however "make menuconfig" returns an error after I've made my changes to the config file.
Code:
Why is make returning that error? I am using a 64-bit kernel.
Ubuntu :: Brasero Returns Internal Error When Burning An Audio CD?
Jul 17, 2011I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
General :: Startvnc, Arch, E17, Returns Error, Picture Inside?
Mar 20, 2011When I type the command
Code:
startvnc
I get the following error
[code]....
Server :: Open A Database File In Sqlitebrowser Returns An Error?
Oct 31, 2010Code:
kenny_strawn@kenny-AOA110:~$ sqlite3 -html -line /var/www/fluxbb/ProprietarySuckware 'select o_base_url from memos'
Error: unable to open database "/var/www/fluxbb/ProprietarySuckware": unable to open database file
kenny_strawn@kenny-AOA110:~$
This database was automatically generated by FluxBB, so I am wondering just why it isn't opening.
Debian Hardware :: Wireless Card Drivers Make Returns Error
May 7, 2011I get errors when i try to use "make" on the package.
View 2 Replies View RelatedUbuntu Servers :: Citadel-server Install Returns Error Bad Variable Name?
Jan 17, 2011I'm trying to install citadel server on ubuntu server 10.04 via apt-get install citadel-server. I get an error at:setting up citadel-server (7.71-1)export: 106: 007: bad variable namedpkg script exits with error code 1.would this be due to unmet dependency?WalterPS. filed a bug in launchpad
View 2 Replies View RelatedGeneral :: Python Script Using Tar From A List Returns Error: Has No Attribute 'startswith'
Apr 4, 2011create a tar file from a list? My script returns the error: AttributeError: 'list' object has no attribute 'startswith' I want to create a compressed tar file containing the directory /usr/lib and the files in the list assigned to variable b.
code:
import tarfile
tar = tarfile.open("backup.gz", "w:gz")
[code]....
Software :: CDemu Returns Error Loading Shared Library Libmirage.so.2?
Jul 2, 2010I have downloaded CDemu from http://sourceforge.net/projects/cdemu/ and installed it without errors. However when I go to /usr/local/bin and run ./cdemud it returns the following error,
Quote:
ben@Scottie /usr/local/bin $ ./cdemud
./cdemud: error while loading shared libraries: libmirage.so.2: cannot open shared object file: No such file or directory
I find this confusing as I have installed libmirage - http://sourceforge.net/projects/cdem...r.bz2/download - and I have found libmirage.so.2 in /usr/local/lib.
Debian :: When Try To Make A Directory Or Upload A File It Returns An Error Saying That Permission Is Denied?
Apr 9, 2010I ftp into the server and see the files, but when i try to make a directory or upload a file it returns an error saying that permission is denied.I am wanting the users to be able to log on with their user account and then be able to have full control over their directories. What can i do to fix this problem?I have enabled port forwarding for ftp. What else is there i can do? If you need any extra information, let me know! I would like to get this fixed asap!Here is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
[code]....
Ubuntu :: Convert File Using Ffmpeg Returns Error Dealing Just With H264 Codec?
Jan 20, 2011I am trying to convert a file using ffmpeg. I have this following code in a terminal.
ffmpeg -i introvideofinal -vcodec libx264 -acodec libfaac introvideofinalfinal.mp4
It returns an error dealing just with the h264 codec saying that I need to use a vpre parameter? I can't find any documentation on using the vpre parameter.
Programming :: System() Routine Returns: Access: Unix Error (2) No Such File Or Directory
Oct 23, 2010I am running shell command through C program using system() routine.
I am executing "opcontrol --status" an executable using the this routine and I get the following error. access: unix error (2) No such file or directory
But when I give the complete path to the executable it runs perfectly.
The executable is installed in "/usr/local/bin/" And the path variable has this path.
Fedora Networking :: Connecting To FTP Error "Failed To Execute Child Process "/usr/lib/firefox-3.5/firefox" (No Such File Or Directory)"
Aug 3, 2009I am running F11 and I want to mount an FTP, but when I try to connect to an ftp server using Places -> Connect to Server, or the bookmarks I made I get an error that says 'Failed to execute child process "/usr/lib/firefox-3.5/firefox" (No such file or directory)' and sometimes it mounts anyway, but most the time it doesn't, and it never connects to the folder I asked it to, I just have to open the mount and navigate to it. I figure this happened because Firefox upgraded to 3.5.1 and the folder is now /usr/lib/firefox-3.5.1/firefox, but I don't know how to update this so that it looks in the right location.
View 6 Replies View RelatedFedora :: Firefox Redirect Error 404 Not Found
Jun 14, 2010I have been using F12 for quite some time now...and its working really great...although am still having some problems...but am sure will get used to it. I have a simple wifi setup at my place, with the dsl modem connected directly to the wifi router. For the past couple of days, whenever i try to access some websites it takes me to [URL] web page. with the following error. Theres no website hosted at this address
[Code]....
Couple more thing that i have noticed is
1. when i clear all my history cache cookies etc.....it starts to work fine....for some time.
2. If i type an address like...www.google or www.facebook it shows the same [URL] page with no website hosted error...instead of the default firefox error page.
3. The search toolbar in firefox also doesnt works properly when ever this thing happens......any search will give a 404 error 404 Not Found The requested URL /search?q=test&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a does not exist.
