Software :: Citadel Mail Server Security?
May 19, 2011know this is vague but I reallydont know much about securityhow secure is the citadel server
View 2 Replies
ADVERTISEMENT
Ubuntu Servers :: Citadel Support PhpBB Sending Mail For Activations?
Oct 31, 2010I am looking to use Citadel in my machine, some questions come to mind before I install it again on my new server.
Can this tool support phpBB sending mail for activations etc?
Can I use CLI mail commands?
I have noted it can support a vast number of domains.
Server :: Synchronize Thunderbird And Citadel Through Synckolab
May 23, 2010I have installed the synckolab add-on in thunderbird to synchronize with my citadel server. The calendar and tasks in te server are synchronized to my client, but not the other way round, i.e. the changes in thunderbird are not written to citadel. Contacts get synchronized ok, in both directions.
Setup is:
Has anybody on this list set up a working synchronization of calendar and task items with synckolab?
Server :: Error 506 During Funambol Sync With Citadel Groupware
Jun 18, 2011I am running an installation of Scientific Linux 6.0 (it is literally RHEL 6 minus the brand), and have successfully setup Citadel Groupware, and synced it with a Mozilla Thunderbird client with the Lightning calendar extension. It is very nice!
However, for the Citadel server to sync with my iPhone, I need to, and have have downloaded and successfully started the latest Groupware Sync Server from here. The Groupware Sync Server is basically an installation of Funambol, specially made to work with Citadel.
I tried to connect to the server from my iPhone with the Funambol connector app, and the Synthesis SyncML app, but none of them worked when I pointed them to: http://[hostname]:8080/funambol/ds (which is what the Groupware Sync Server documentation told me). Of course, I replaced [hostname] with my actual hostname.
I checked the logs of both sync apps, and they both say the following:
Quote:
[ERROR] processItemStatus: server sent status 506 in SYNC
[ERROR] Error #506 in source addressbook
On the Citadel and Groupware Sync Server forums, I was told that error 506 meant its something on the server going on, so I got the two relevant log files, /opt/Funambol/logs/ds-server/ds-server.log, and /opt/tools/tomcat/logs/catalina.out (the links point to pastebins of the output).
What does "error 506" mean, and how do I correct it?
BTW, I disabled my entire firewall just in case that was the issue.
Ubuntu Servers :: Citadel-server Install Returns Error Bad Variable Name?
Jan 17, 2011I'm trying to install citadel server on ubuntu server 10.04 via apt-get install citadel-server. I get an error at:setting up citadel-server (7.71-1)export: 106: 007: bad variable namedpkg script exits with error code 1.would this be due to unmet dependency?WalterPS. filed a bug in launchpad
View 2 Replies View RelatedUbuntu Security :: Keep Attackers Off Mail Server?
Jun 8, 2011here is my mail log I have setup virtual hosting with postfix and courier examples from my maikl.info file
Code:
8 14:46:46 dynamicweb pop3d: LOGIN FAILED, user=arthur, ip=[::ffff:95.31.15.64]
Jun 8 14:46:46 dynamicweb pop3d: LOGIN FAILED, user=ashley, ip=[::ffff:95.31.15.64]
Jun 8 14:46:46 dynamicweb pop3d: LOGOUT, ip=[::ffff:95.31.15.64]
[Code]...
Security :: Tools For Securing Mail Server?
May 21, 2011iam working on mail server in redhat centos. i want to know how to secure my mail server for heavy loading , any monitoring tools in GUI or console , is any essential tool which is used in Like MNC for mail server..
i know few command in like top,netstat,etc through google but i willing to know some more
Server :: Mail Bouncing - SMTP Error From Remote Mail Server After Initial Connection: 550 Access Denied
Aug 30, 2010This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
Ubuntu Servers :: Migrate Postfix Mail Server To Exchange 2010 Mail Server
Nov 3, 2010I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedServer :: Mail Server Migration - How To Deliver Locally AND Forward Mail To New Server
Jan 21, 2011Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
Ubuntu Servers :: Make A Local Mail Server That Itself Is A Client To A WAN Mail Server?
Mar 10, 2011How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedServer :: Mail Server Configuration - Send Mail To External Domain(internet)
Feb 22, 2011There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedCentOS 5 Server :: Postfix And Hosts File - The Mail Server Could Not Deliver Mail
Mar 20, 2011I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
Ubuntu Security :: Updated Browsers Using Update Manager Have Lost Security Login Pages For Web Mail?
Mar 3, 2011i updated both browsers i have and lost my secure log-in pages (no padlocks showing ) concerning different Web mail accounts.Just before i did these updates i checked an unrelated thing on-line regarding my sound card of which i kept a copy of and got this message below :
!!ALSA/HDA dmesg
!!------------------
[ 12.762633] cfg80211: Calling CRDA for country: AM
[code]....
Fedora :: Unable To Connect From Clients Computers To Mail Server For Receiving Mail?
Oct 15, 2009I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies View RelatedUbuntu :: Can't Send From Own Mail Server With Mail Client (Thunderbird Or Evolution)?
Jun 1, 2011I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
Ubuntu Servers :: Secondary Mail Server And A Mail Gateway/relay?
Aug 3, 2011Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
ISP supplied CISCO router
Draytek VigorPro 5510 UTM
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?
General :: Configure Mutt Mail Client For Mail Server Other That Gmail?
Jan 9, 2011I am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...
Server :: Send Mail From Unix Mail Command To Yahoo-id With Attachment?
Feb 15, 2010i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedServer :: Postfix Logs - Difference Between The Mail.log And Mail.info Files?
Jul 27, 2010I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
SUSE :: Mail Bouncing - Xx@xx.com SMTP Error From Remote Mail Server After Initial Connection
Aug 30, 2010This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
View 4 Replies View RelatedGeneral :: Debian Mail Server As A User Send A Mail With Attachment Maximum Wight Is 5 Mb
Jun 8, 2011How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedServer :: Configure Postfix To Relay Mail To Multiple Internal Mail Servers With Different Domains?
Aug 6, 2010Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
Server :: Configure Mail With Postfix & Cyrus-imap - Cannot Send Mail Through Command Line
Nov 19, 2010I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
Server :: Build The Virtual Machines To Exclude The Actual Mail Files And Mail Logs From CentOS?
Oct 12, 2010I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
Networking :: Send Mail - Internet Mail Server Seems Not Working At All
Mar 30, 2011i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
Server :: Gmail Does Not Work For Receiving Mail Through Function MAIL()
Sep 6, 2010I do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...
You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..
Server :: Setup An MTA To Pass Mail Onto An External ISP/mail Provider?
Jul 1, 2009I have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).
View 2 Replies View RelatedSoftware :: Debian Mail Server Won't Send Or Receive Mail
Apr 22, 2010i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
CentOS 5 Server :: Cent OS 5.4. - Send A Mail With Mail In Console
Apr 21, 2010i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View Related