Ive just done the latest update ( AFAICT principally an upgraded kernel and firefox stuff)
I reboot the computer and then the perl script that was working whilst the upgrade was going on , now doesn't work , and i get prompted to save the *.pl file
WTF
mea culpa - on rebooting the browser , id left a stray 'print ' before writing the HTML header
I have a connection error when i try to use
sudo apt-get apache2 install
I'm running a virtual server with ubuntu server installed as the OS. The physical server is windows 2008.
I have configured the interface for a static ip code...
I have configured my resolv.conf so it points to the correct nameserver ip
When i ping both an ip or a hostname everything is OK
but when i run
sudo apt-get update
I just get a load of connection errors and i cannot install any packages
The last complete update failed on one package (Cups Common - 1.0 mb), each time I login the update is offered via update manager and each time it fails with this message:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...ntu3.6_all.deb
Connection failed [IP: 91.189.88.31 80]
can anyone shed light on this - (I'm running 9.04 Jaunty)
Libnss3-1d
xulrunner-1.9.1
xulrunner-1.9.1-gnome support
After click on install updates and entering password, a message says "Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages? Yes/No.
If I answer No, this message appears:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
If Yes, it tries to download but immediately:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po....10.1_i386.deb
404 Not Found [IP: 91.189.88.31 80]
It has always installed the updates with no problems, until these 3 updates remain in pending installation status.
I have a problem here with my back track. am not able to update my metasploit modules using svn-update nor sudo apt-get is working..
View 1 Replies View RelatedI have a kind of weird problem on one of our servers. The server software was upgrade a couple times now and it went from 8.04 to 8.10 to 9.04 to 9.10 to eventually 10.04Now I'm 100% sure the current version should be 10.04 but all of the sudden an 'apt-get update' does not work anymore, so I dig some further why that could be...A simple 'cat /etc/lsb-release' gives me this answer
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
[code]....
Can't boot after updating x this has happened before but not like this. Grub works just fine but nothing after what I can't do
1 10.04 = black screen
2 recovery mode=black screen
3 ctrl+alt+f1 = nothing
Since I have updated last night from maverick to the latest beta of natty narwal, I'm having a lot of trouble getting Nautilus (desktop included) to work.
It seems to crash since the very start as when I turn off the computer, the message of "force exit" appears.
When I try to update from a Debian notification of new updates the update window freezes without showing the updates. When I try to update in a terminal, I get the following message: "Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?". If another process is using it, I know nothing about it. How do I solve this problem?
View 14 Replies View RelatedI'm a total NOOB and I just finished a dual boot Ubunutu Studio 9.10 64bit/Windows 7 x64 install on a brand new i7 PC using a WD10EARS hard drive (with the new Advanced Format) and I gave myself top marks for getting by the mammoth amount of obstacles to accomplish what I have so far.
Item of note: you can NOT do a complete install with Ubuntu Studio 9.10 using a wireless device. The installer ONLY recognizes motherboard ethernet ports. No worries, I moved it to the office and the LAN line and got a complete install. I am using this in my living room though as a Media PC with MythTV and the distance requires me to use WIRELESS.
After a successful install, I was unable to get my brand new, out of box Netgear WG111v3 to establish a successful connection and I need your help. Pardon the length of this post, I will try to organize it as best as I can but I have done a LOT of troubleshooting before posting here. Here's what I did so far:
1. Tested Wireless in Win7 on same PC. Works GREAT! Rebooted, went into Ubuntu Studio 9.10 and got no joy.
2. This page says the WG111v3 works out of box with Karmic and I can state with 100% certainty it does NOT.
3. Went to this page (which is THE best how to out there) and followed instructions. I discovered a bug in wpa_passphrase immediately. I use a very complex passphrase using !#$&@ characters in the mix. wpa_passphrase dies with various errors when it sees these characters because it thinks they're command items rather than part of the text in my key. Try it yourself. Create any long text string with those characters and input it to wpa_passphrase. It dies. Works fine with regular letters/numbers. I had to use this page to get the HEX value for my passphrase so I could complete my interfaces file. On a hunch, I changed my passphrase on the router to be a simple 10 letter word all in lower case. wpa_passphrase changed that to HEX fine, updated interfaces file, rebooted router and PC and got nothing. So it's NOT the passphrase.
4. Went to this page, which again states it works out of box but doesn't and tried all the help there. NO JOY.
5. Tried here too. The help there is good when combined with #2 above but still nothing.
6. Went to unsupported versions of Ubuntu to try some old school tricks. Got nothing.
7. Found this site and it has EXACTLY my problem! I always end up with "No working leases in persistent database - sleeping." when it tries to get an IP address from the router. As you can see, that user found no fix either.
8. I turned off ALL security on the router and left it wide open, updated my interfaces file appropriately, rebooted everything and it still couldn't connect?
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
I wanted to do a routine check/update today and I received this error code...
View 3 Replies View RelatedI'm running OS 11.3x64, KDE 4.5.
After running updates yesterday (Friday) now the Shutdown and Log Off buttons don't work in KDE. This happens with the taskbar buttons, and in the Leave menu. The only way out now is to ALT+F1 into a console, log in as root, and run shutdown. The system will shutdown at that point, but it's pretty inconvenient. I'm using the login manager that installs with KDE (can't remember the name) since Gnome was installed as a secondary desktop.
I have followed the posted instructions on the "restricted formats" as specified in the stickie on the forum.
When I insert an audio CD, I can see the mp3/ folder in KDE with the tracks on the CD, but whenever I try to copy one of the mp3 files from the folder I get a VERY wide error messagebox stating that lame threw an error.
[When I use the command line tool "ripit" - the mp3s are generated without problems, so I assume all my encoders are working.]
Copying an ogg file with the KDE audiocd integration works fine, but unfortunately ogg is not supported on an iPod, and since ripping CDs through a VM with iTunes takes forever and a day, I want to rip the mp3 files and then copy to the VM so I can use iTunes to sync them to the iPod (sigh).
And yes, I would prefer to use Amarok to sync to the iPod directly but I made the mistake of buying an iPod recently and I've found that the 5/6th gens don't work (and probably never will) due to the hash encryption.
I have a server installed with a Fedora 8 and the other client PC were installed with Windows XP. Recently, I copied an educational courseware (this courseware is developed specially for Windows based PC) into the Linux-based server. I found that the .EXE (application file) :were unable to be opened in all of the clients and also the server. How can I solve this problem?
View 7 Replies View RelatedEjabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...
Looks like it may be a permissions problem.
Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?
I'm having some perl problems while using yum update... I recently upgraded to 5.3 and have the latest MailScanner.. I do not want to have to remove perl because it will remove a bunch of other things along with it.
[Code]....
OS: Centos 5.6 The server is installed with Apache WebServer and an open source application called CiviCRM.Last few lines of yum update command executed as root.
--> Finished Dependency Resolution
perl-AnyEvent-5.240-1.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency: perl(Net::SSLeay) >= 1.33 is needed by package perl-AnyEvent-5.240-1.el5.rf.noarch
[code]....
Trying to run Cluster to use GFS over iSCSI, but get fencing error.
Here is what I do:
1. edit /etc/hosts code...
I cannot update perl due to a missing dependency.
Installed perl:
[kbs1@localhost ~]$ rpm -qa | grep perl-5
perl-libwww-perl-5.834-1.fc13.noarch
perl-5.10.1-112.fc13.i686
perl-5.10.1-112.fc13.x86_64
[Code].....
downgrade also does not work. I just updated F12 to F13 using DVD and this occured. Also prevents me from doing "full" yum system update, these packages always fail. I do not understand the problem, it says that perl-libs 5.10.1-112 requires perl-libs 5.10.1-112, but I have that installed.
Very new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
[code]....
I'd like to use a perl script to update a fields in mysql database when pianobar (command line pandora radio player) starts a new song. Pianobar has the ability to run a script based on events, I'd like to take advantage of and use perl toparse the artist,song,album and update the corresponding fields. Then later retrieve them and display them with php/html. I am by no means proficient with perl. I started to use bash, but it looks like perl will be much more efficient and and less time consuming.
Code:
#! /usr/bin/perl -wT
use strict;
[code]...
I have got red hat5 installed on my pc,but not able to run perl or php programs on it. only html display can be obtained,but perl and php programs are not running on firefox browser.when executed,web browser page with server not found msg is displayed.
View 11 Replies View RelatedHow would I make my server execute PHP and Perl scripts? (I'm going to be working with both)
I have PHP5 and the latest Perl installed, and my installation is fresh.
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
code....
Trying to install libmd5-perl on Ubuntu server 10.04 beta 2! It says there is no candiate version found for libmd5-perl
View 6 Replies View RelatedI have Apache/2.2.14 (Ubuntu) DAV/2 SVN/1.6.6 mod_fcgid/2.3.4 Phusion_Passenger/2.2.14 PHP/5.2.10-2ubuntu6 with Suhosin-Patch configured In UBUNTU 10.04 I like to install apache2 mod_perl I make apt-get install libapache2-mod-perl2 and I get: Quote: libapache2-mod-perl2 is already the newest version.
Ok I try sudo a2enmod mod_perl ERROR: Module perl does not exist! how I make Perl work in apache2 UBuntu 10.04
This is a 64 bit machine
[root@intergate2 log]# rpm -q perl --qf '%{NAME} %{VERSION} %{ARCH}'
perl 5.8.8 x86_64
[root@intergate2 log]# yum install perl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.stanford.edu
* base: mirror.hmc.edu
* extras: mirror.raystedman.net
* updates: centos.eecs.wsu.edu
Setting up Install Process
Resolving Dependencies
---> Running transaction check
---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated
---> Package perl.x86_64 4:5.8.8-27.el5 set to be updated .....
Transaction Summary
Install 1 Package(s)
Update 1 Package(s)
Remove 0 Package(s)
CentOS and RHEL even though I've been using various Debian/Ubuntu Distros for quite some time. However, I always used to install perl modules via apt-get or, if that did not work, via cpan.In CentOS, I tried installing a couple of perl modules via yum but there are only a very few available. When trying to install perl modules via cpan, the install process usually fails during the make process.I'd prefer to install those modules via the distribution's package manger yum as it's easier to resolve dependencies. Are there any repositories I should add to have more perl packages available? (Where to add further repositories, I just know /etc/apt/sources.list in debian based distros)The other option still would be to install perl modules via cpan. For instance, when trying to cpan install Geo::IP, the output is as follows:
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
Database was generated on Wed, 02 Mar 2011 02:42:03 GMT
[code]....
Is there an easy way to update Perl from repos or do I need to compile from source to get a newer version?
Longer version
I'm trying to set-up MailScanner which requires a newer version of Perl IO than CentOS 5 appears to have in it's standard repos. I've also tried updating Perl from the rpmforge repo - but that just results in a bunch of transaction conflicts being reported by Yum. Is there another way of updating Perl from repos?
[Code]....
W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems