OS: Centos 5.6 The server is installed with Apache WebServer and an open source application called CiviCRM.Last few lines of yum update command executed as root.
--> Finished Dependency Resolution
perl-AnyEvent-5.240-1.el5.rf.noarch from rpmforge has depsolving problems
--> Missing Dependency: perl(Net::SSLeay) >= 1.33 is needed by package perl-AnyEvent-5.240-1.el5.rf.noarch
[code]....
I'm having some perl problems while using yum update... I recently upgraded to 5.3 and have the latest MailScanner.. I do not want to have to remove perl because it will remove a bunch of other things along with it.
[Code]....
This is a 64 bit machine
[root@intergate2 log]# rpm -q perl --qf '%{NAME} %{VERSION} %{ARCH}'
perl 5.8.8 x86_64
[root@intergate2 log]# yum install perl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.stanford.edu
* base: mirror.hmc.edu
* extras: mirror.raystedman.net
* updates: centos.eecs.wsu.edu
Setting up Install Process
Resolving Dependencies
---> Running transaction check
---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated
---> Package perl.x86_64 4:5.8.8-27.el5 set to be updated .....
Transaction Summary
Install 1 Package(s)
Update 1 Package(s)
Remove 0 Package(s)
Is there an easy way to update Perl from repos or do I need to compile from source to get a newer version?
Longer version
I'm trying to set-up MailScanner which requires a newer version of Perl IO than CentOS 5 appears to have in it's standard repos. I've also tried updating Perl from the rpmforge repo - but that just results in a bunch of transaction conflicts being reported by Yum. Is there another way of updating Perl from repos?
I've been running SQL-Ledger on Centos 5.5 (x86_64) for some time. At some point in time I must have done something to either perl or CPAN and I now get the following error in SQL-Ledger.
Not an ARRAY reference at SL/Form.pm line 1047.
Attempt to free unreferenced scalar: SV 0x18034630, Perl interpreter: 0x17363010 during global destruction.
Attempt to free unreferenced scalar: SV 0x18034630, Perl interpreter: 0x17363010 during global destruction
I'm trying to run yum update and I'm seeing the following
error:--> Finished Dependency Resolution
perl-IO-Compress-2.024-1.el5.rf.noarch from rpmforge has depsolving problems Missing Dependency: perl(Compress::Raw::Zlib) = 2.024 is needed by package perl-IO-Compress-2.024-1.el5.rf.noarch (rpmforge)
Error: Missing Dependency: perl(Compress::Raw::Zlib) = 2.024 is needed by package perl-IO-Compress-2.024-1.el5.rf.noarch (rpmforge)
You could try using --skip-broken to work around the problem
[Code]...
what is this, and more importantly, how do I fix it?
Quote:
Package Arch Version Repository Size
[Code].....
I am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
View 7 Replies View RelatedOn two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View RelatedI am unable to run perl-cgi script in my cent os Apache server. I have used locate perl command in terminal window and it gives following result:
[code]....
tell which is the path to perl for example "usr/bin perl"
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
I updated from centos 5.3 to 5.4 and the update is left hanging in the update for tog-pegasus. I updated the other packages but I resist, I can do?
I think the problem is the dependence of cluster-cim but I'm not sure ..
I followed the Perfect Server Setup form HowToForge using the CentOS 5.2 dist because it said it ran ISPconfig3 right out of the box on their site. (by the way, its VERY difficult finding 5.2 i dont know why)
Everything went fine until I had to run yum update, then I keep getting messages that it can't connect to the repositories.
I dont know if it's an issue of my nic not functioniing, or if there is something wrong with my network settings.
1) how can i verify that the nic is working? (using lspci it's listed and has [tulip] after it)
2) do i need to change the repos url?
I've been having problems installing httpd (in that it cannot be found when I do a Yum search). I get this error when running yum:
Bad id for repo: CentOS5 base, byte = 7
Bad id for repo: CentOS5 updates, byte = 7
after changing in the server the network configuration of DHCP to have an IP set, every time I run yum update I get the following error:
Error: Cannot find a valid baseurl for repo: rpmforge
And I noticed that every time you reboot the server the file resolv.conf is erased
I am attempting to use yum behind a MS Proxy. I am receiving the following error:
#yum list
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
http://mirror.centos.org/centos/5/os/i386/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again I beleive the yum.conf is configured correctly:
[Code]....
I want to upgrade their packages yum update,An error
yum update
Loaded plugins: downloadonly, fastestmirror, priorities
Loading mirror speeds from cached hostfile
* addons: ftp.chg.ru
[code]....
I'm running my own repository for my CentOS servers and ran into problem which seems to be on the 32bit boxes only. When trying to patch, I get the following dependency error.
[Code]....
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
where to find ODBC drivers for CentOS 5.5 to work with Perl 5.x (preferrably free)?
View 2 Replies View RelatedI did this several other similar servers here today without errors. I'm not quite sure what I'm getting hung up on here.
[root@devoratech yum.repos.d]# rpm -q centos-release
centos-release-5-3.el5.centos.1
[root@devoratech yum.repos.d]# yum repolist
[code]....
I cannot update perl due to a missing dependency.
Installed perl:
[kbs1@localhost ~]$ rpm -qa | grep perl-5
perl-libwww-perl-5.834-1.fc13.noarch
perl-5.10.1-112.fc13.i686
perl-5.10.1-112.fc13.x86_64
[Code].....
downgrade also does not work. I just updated F12 to F13 using DVD and this occured. Also prevents me from doing "full" yum system update, these packages always fail. I do not understand the problem, it says that perl-libs 5.10.1-112 requires perl-libs 5.10.1-112, but I have that installed.
I'd like to use a perl script to update a fields in mysql database when pianobar (command line pandora radio player) starts a new song. Pianobar has the ability to run a script based on events, I'd like to take advantage of and use perl toparse the artist,song,album and update the corresponding fields. Then later retrieve them and display them with php/html. I am by no means proficient with perl. I started to use bash, but it looks like perl will be much more efficient and and less time consuming.
Code:
#! /usr/bin/perl -wT
use strict;
[code]...
Ive just done the latest update ( AFAICT principally an upgraded kernel and firefox stuff)
I reboot the computer and then the perl script that was working whilst the upgrade was going on , now doesn't work , and i get prompted to save the *.pl file
WTF
mea culpa - on rebooting the browser , id left a stray 'print ' before writing the HTML header
To install BackupPC I need :
XML::RSS - allows the web interface to use RSS. Nice if you want backup notifications via RSS.
But I cannot find this perl-module in the repo's via yum.
Quote:No package perl-XML-RSS available.
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
View 3 Replies View RelatedI want to run following perl-cgi script in cent OS,but it just print the code as given below-
#!/usr/bin/perl
use Restrictionmap;
use Rebase;
use SeqFileIO;
[Code]....
When using YUM UPDATE from the prompt more than 230 items are scheduled for update however when the download process has completed I receive errors regarding Perl dependences such as:
file /usr/lib/perl5/5.8.8/List/Util.pm from install of perl-5.8.8-27.el5.x86_64 conflicts with file from package perl-5.8.8-18.el5_3.1.i386
I am unsure how to overcome this. It occurs on two different servers.
I have a permission to use several CentOS5 computers that are connected to a server where all shared programs sit. Accordingly, all Perl users for example have an identical path to Perl (e.g. /export/user/bin). The administrator suggested I'll install all the programs I need (specifically Perl and Mysql) in my personal space, and then add them to the path before the already installed ones. Accordingly, I could add/change modules without "sudo" privileges, and without changing the global setting.
View 1 Replies View Related