How would I make my server execute PHP and Perl scripts? (I'm going to be working with both)
I have PHP5 and the latest Perl installed, and my installation is fresh.
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
code....
what is wrong i have a web server setup and working fine running a web store in php i have added a search engine for the web the easiest setup programme is with an extension .pl when i try and execute this it asks me if i want to download it or open it i had this problem with the php script which a reboot sorted out so i have tried rebooting but get the same problem does anybody know how i can get it to execute on my server?
View 2 Replies View Relatedi want to execute system command with perlm but it gives me error.
command is wmic client. here it is
#!/usr/bin/perl
open (EP, "/home/user/Templates/domainpc.log");
while (<EP>) {
chomp;
[Code]....
I'm playing with perl and found that I could just go:
"perl /home/me/bash_script.sh"
and it would execute, even though it's not a perl script. Is that just a feature or is there something I'm missing? Why does perl do this?
Is it possible to simultaneously execute all perl scripts within a folder? How?
View 1 Replies View RelatedI have a script to utilize the perl one liner to replace a ip address.
Code:
#!/usr/bin/ksh
set -x
PRIP=172.15.100.176
OPRIP=172.15.100.115
[code]....
the script runs fine. but the perl one liner seems not working at all. but if i copy the perl line to a command line, it runs correctly.
I had a problem on ubuntu when running "sudo apt-get dist-upgrade" and wanted to report how I solved it. Hopefully this helps anybody with similar problems.
I always got the error message:
Code:
The problem is in libxml-sax-perl.postinst which does not seem to be executable.
I did not install any perl packages manually by cpan and found the solution in http://ubuntuforums.org/archive/inde...t-1342009.html where it was only one part of a bigger problem.
I created a backup file (always a good idea) of my libxml-sax-perl.postinst:
Code:
I deleted the old file:
Code:
Created a new file:
Code:
With the following content (copied from the link mentioned above):
Code:
I am trying to write a perl script which will give an interactive session to a user to execute command on the server. I have written a small script to do this :
Code: !/usr/bin/perl -w
use strict;
use Net::SSH::Perl;
my $host = '192.168.1.1';
my $username = 'user';
my $login_passwd = 'test123';
[Code]...
When I try to compile some Java code on Ubuntu 10.10 (kernel 2.6+) using make and a Makefile.
I get an error indicating that the make utility cannot execute the java compile command (javac).
The error reads: /bin/bash: line 6: .: /usr/local/jdk1.5.0_18/bin/javac: cannot execute binary file
I am executing make as root. I have enabled permissions on all directories in the path /usr/local/jdk1.5.0_18/bin/javac and on javac itself.
I get this error whether using a jdk installed via ubuntu apt-get, or whether I install the jdk myself. And I get it using either Java 1.5 or 1.6
My machine has an 80386 processor. I notice the make utility is built for i686-pc-linux-gnu
However, I can manually compile using javac.
I can compile calling javac from within a bash script.
I can compile using the java compiler gcj from the command line: gcj --main=HelloWorld HelloWorld.java -o HelloWorld.exe
But I cannot compile java code from the makefile. Any reasons why I might be getting this error?
I am trying to make a hash of objects in perl (long story.) I have a package containing the main hash and all the subroutines necessary to work with it. My "new" subroutine used to add an object to the hash goes like this:
Code:
$tmpdir="/tmp";
$subdir="/AutoScript";
[code]...
Can i make a .desktop file taht it executes autostart.sh script or any other script?
like xmonad.desktop od dwm.desktop?so that when gdm or any other gui login manager loads autostart apps in xmonad?
how to make a c function present in the library to execute in php and should be able to pass a any new argument back to the c library from php
View 2 Replies View RelatedVery new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
[code]....
I have a Dell PowerEdge 2850 running Ubuntu 10.04 Server with SSH and Samba. My problem is that I am unable to execute my adduser.sh script which reads from a text file and adds users to the box and Samba. I have ran chmod a+x to make it executable and placed it in /usr/local/bin.
When I run sudo adduser.sh I get "sudo: unable to execute /usr/local/bin/adduser.sh: No such file or directory".
When I run adduser.sh I get "-bash: /usr/local/bin/adduser.sh: /bin/bash^M: bad interpreter: No such file or directory " I have been using Kubuntu as my home workstation for some time now but I have managed Windows servers but since I was given the freedom to setup this server I chose Linux.
how to bind a script to a F key (F12) that will run as root even when not logged in. I have a headless server on client premises where it'd be easier for them to press F12 to run this script that will be rarely needed than to give them SSH instructions etc. I know this must be do-able, but I can't get my Google-fu on for this question. The only way that I can possibly think of doing it is to touch a file whenever that key is pressed and have the script idly checking for that file every few seconds in a loop.
View 2 Replies View RelatedTrying to install Parallels Plesk Panel 10 x86_64 onto a completely new installation of Ubuntu 10.04.1 LTS
root@server:~# chmod +x parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
root@server:~# ./parallels_installer_v3.7.1_build101014.17_os_Ubunt u_10.04_x86_64
-bash: ./p.arallels_installer_v3.7.1_build101014.17_os_Ubun tu_10.04_x86_64: cannot execute binary file
Trying to install libmd5-perl on Ubuntu server 10.04 beta 2! It says there is no candiate version found for libmd5-perl
View 6 Replies View RelatedI have Apache/2.2.14 (Ubuntu) DAV/2 SVN/1.6.6 mod_fcgid/2.3.4 Phusion_Passenger/2.2.14 PHP/5.2.10-2ubuntu6 with Suhosin-Patch configured In UBUNTU 10.04 I like to install apache2 mod_perl I make apt-get install libapache2-mod-perl2 and I get: Quote: libapache2-mod-perl2 is already the newest version.
Ok I try sudo a2enmod mod_perl ERROR: Module perl does not exist! how I make Perl work in apache2 UBuntu 10.04
Some time ago I installed LAMP in my server, but now I need to execute .php files from the command-line (in order to execute some manteinance scripts for mediawiki). Seems that the PHP files running in the server are run thru some kind of "module" in apache2. Can I tell apache2 to run a .php file in command-line mode using that php module? Or should I install a fresh copy of php-5? Won't that interfere with apache or mangle the system?
View 4 Replies View Relatedstarted setting up my 3rd ubuntu server under the OS of Ubuntu Linux 9.04 64 bit. I have configured the server to allow root access and am using this to execute this file. As you can see from the screenshot of PuTTy, the file exists but is refusing to load up. I am also able to nano the file. I have tried moving the file to /root/ and still had no luck.
View 3 Replies View RelatedOn Ubuntu 10.04 with Apache and PHP installed, I can execute a test.php file
Code:
If I specify it on my Apache web server
Code:
However, I am not able to configure the web site to execute index.php automatically.
These are the settings I have.
Code:
Ive just done the latest update ( AFAICT principally an upgraded kernel and firefox stuff)
I reboot the computer and then the perl script that was working whilst the upgrade was going on , now doesn't work , and i get prompted to save the *.pl file
WTF
mea culpa - on rebooting the browser , id left a stray 'print ' before writing the HTML header
I've just installed subversion.I need to create a script /etc/init.d/svnserve that will start at boot time.I want to use start-stop-daemon --start so I can track my process and eventually kill it using start-stop-daemon --stop.My problem is that I can't get it to work and the documentation shows no exemple.
I've replaced $DAEMON by the whole line: svnserve -d -R -r $REPO_ROOT and got -d is not an option.I'm not quite sure what to do at that point. If someone has some experience with start-stop-daemon it would be great.
I am trying to insall CPAN, apparently I do this by typing CPAN at the command line.After much else, this results in
Code:
**UNRECOVERABLE ERROR**
Could not find gdlib-config in the search path. Please install libgd 2.0.28 or higher.
If you want to try to compile anyway, please rerun this script with the option --ignore_missing_gd.
Warning: No success on command[/usr/bin/perl Makefile.PL INSTALLDIRS=site]
[code]....
I am installing VMware-server-2.0.2-203138.i386 on FC 12
Have an error when executing vmware-config.pl initially. When I try again it has the message:-
start of messages;
The following VMware kernel modules have been found on your system that were not installed by the VMware Installer. Please remove them then run this installer again.
vmmemctl
vmci
vmxnet
vmhgfs
vmblock
I.e. - 'rm /lib/modules/2.6.31.12-174.2.3.fc12.i686/misc/<ModuleName>.{o,ko}'
Execution aborted.
End of message
I tried remove them using modprobe e.g.
modprobe -r -v vmemctl the response was "WARNING: All config files need .conf: /etc/modprobe.d/anaconda, it will be ignored in a future release."
Subsequently I tried vmware-config.pl, but have the same error.
I'm running an Apache web server version 2.2.11 on Fedora 10. I'm trying to get it to run a PERL cgi script but with only partial success. The script uses the PERL cgi package.
The perl script is a simple test case that creates a form to fill in. Once the submit button has been clicked it should then return the data submitted. The perl script writes this to a file called output.cgi
The intial script located in /var/www/cgi-bin/index.cgi gets executed fine when I go to [URL], this works with no probs. However once I hit the button to submit the data I then get the error
Not Found
The requested URL /cgi-bin/output.cgi was not found on this server. Apache/2.2.11 (Fedora) Server at localhost Port 80 Im not sure if its a perl problem or server setup problem, theres probably a simple switch or something but Im out of ideas at the moment.
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
View 2 Replies View Relatedhere is the upload form:
<form enctype="multipart/form-data" action="uploader.php" method="POST">
Choose a file to upload: <input name="uploadedfile" type="file" /><br />
<input type="submit" value="Upload File" />
</form>
[Code]...
I recently reinstalled the B module for perl. Now I found out it didn't just do that, it installed a whole new copy of perl into /usr/local/bin/perl. When I type 'which perl' at the terminal, it says '/usr/local/bin/perl' instead of '/usr/bin/perl'. Normally, this wouldn't bother me. But I installed the one in local/bin without threading support. The one that comes with the system already is build with threading support, which is why I want to switch back to the system perl, and possibly remove the one in /usr/local/bin.
So how do I change it so that the result of 'which perl' returns as '/usr/bin/perl'? And what do I have to do to remove /usr/local/bin/perl?
The reason I need threading support is because I'm designing a file copier that copies several chunks of a file simultaneously to speed up the copying process. Guaranteed a useful script if it works.
I am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
View 7 Replies View Related
