Ubuntu Servers :: BoxBackup Server Daemon Not Starting?
Jul 27, 2011
I'm trying to run BoxBackup to sync a couple active servers to a data server. I installed the server and client, making sure to follow the instructions closely with all the certificates. The problem is the service daemon on the service won't even start. The service manage reports: "bbstored dead but pid file exists" (basically, tried to instantiate the process, but it died due to faults).
Here's the log of the daemon in /var/log/box
Code:
Jul 27 13:05:10 frogbert bbstored[13429]: NOTICE: Box Backup Store Server v0.11rc8, (c) Ben Summers and contributors 2003-2010
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Starting daemon, version: 0.11rc8
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Using configuration file: /etc/boxbackup/bbstored.conf
Jul 27 13:05:10 frogbert bbstored[13433]: WARNING: Exception thrown: ServerException(SocketBindError) at ../../lib/server/SocketListen.h(232)
[Code]...
View 1 Replies
ADVERTISEMENT
May 1, 2010
I currently have sendmail installed. It starts as a daemon but I want to avoid doing that. I want to start it manually.Also am a dynamic host.so every time i start my computer my ip changes. I use ddclient to update my records at dyndns.com.but how to configure sendmail in the case of dynamic hosts since it looks at the file /etc/hosts which contains information about the static hosts.
View 2 Replies
View Related
Aug 29, 2011
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies
View Related
Apr 27, 2010
I've apparently messed up something I guess with the rc.M file. When I boot the system it goes to
Code: Starting HAL Daemon: /usr/sbin/hald --daemon=yes
and it freezes.
View 4 Replies
View Related
Mar 24, 2011
I am tring to stop avahi from starting and running at all.I use kill PID and killall avahi-daemon and it will not go away, it comes back with a new PID. Does anyone know a way of stopping it?
View 2 Replies
View Related
Jan 25, 2010
I am using CentOS 5 Both a production server and VM CentOS get this problem.When issue:
# /etc/rc.d/init.d/haldaemon start
Starting HAL daemon: [FAILED]
View 1 Replies
View Related
Jun 23, 2010
I have it downloaded (linux version). What folder should I put it in?? Does it matter?
I am new to bash so i dont know how to start the Ventrilo Server up.
I navigated to the folder the server is in and did ./ventrilo_srv and ./ventrilo_srv -d and they both come up "No such file or directory".
View 2 Replies
View Related
May 22, 2010
I have a fedora 13 rc3. The problem is that boot the system stops here Starting libvirtd daemon
Prior to that, stop at this point registering binary handler for windows application. I got up to enter the
tty2
to remove Wine
This time to stop here Starting libvirtd daemon
View 1 Replies
View Related
Feb 15, 2011
Starting mysqld daemon with databases from /var/lib/mysqli m installed mysql-5.0.77-4.el5_5.4
[root@serv ~]# mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
[root@serv ~]# /etc/init.d/mysqld stop
[code]....
View 6 Replies
View Related
Jul 26, 2010
So recently my MySQL server doesn't startup when Ubuntu boots (it used to) and therefore causes database errors with my Web applications. How do I add MySQL to the run at startup list?
View 1 Replies
View Related
Sep 15, 2010
I've followed this guide [URL] after rebooting the system hang at:
starting ati external events daemon [OK]
This line start blinking for a while, then nothing happen. I am using a radeon hd 4225. (I'm booting with acpi=off).
View 3 Replies
View Related
Feb 11, 2010
Running Ubuntu Server 9.10.I have a couple of programs that I would like to start at boot, they will both run forever. I have created a cron job with @reboot and that will start a program, but if I have multiple programs in there it waits for the first to finish before starting the next.
View 2 Replies
View Related
Oct 18, 2010
I recently installed an Ubuntu 10.04LTS server. I have zabbix-server on that machine, and I noticed that after reboot it won't start. Probabily, the mix of upstart and old init.d scripts result in zabbix starting when mysql is not active yet, in fact in zabbix-server.log I see it cannot reach db. How can I make sure zabbix-server waits for mysql?
View 9 Replies
View Related
Nov 22, 2010
I am trying to share files between Windows XP machine, ubuntu server, debian server and ubuntu desktop. But mainly between ubuntu server and Windows XP computer.I also like to learn samba, because probably I could do all this with ftp server as well.I set up and configured samba following the instruction on Online Ubuntu Server Guide.But when I run the command:sudo /etc/init.d/samba restartI get:bash: /etc/init.d/samba: No such a file or directory I don't know what is wrong?
View 9 Replies
View Related
May 20, 2011
Getting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
View 9 Replies
View Related
May 5, 2011
i'm not the most knowlegable person but i have successfully installed mysql in the past. but now that i am attempting to install it again i'm getting this error during installation. has anyone seen this before?
mysql error: *Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1
View 6 Replies
View Related
Feb 1, 2010
I'm trying to install postgresql 8.3 on Ubuntu 8.04 LTS server and I'm running into problems starting it. Commands I've done # apt-get install postgresql postgresql-common Things I've tried Starting it manually
# /etc/init.d/postgrsql-8.3 start
Nothing appears in my /var/run/postgresql When I try and start psql as the postgres user I get the following error psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? I've been following the docs at: https://help.ubuntu.com/community/PostgreSQL
View 2 Replies
View Related
Apr 23, 2010
I have recently purchase a Dyxel DMA-1100p and have had a great success rate using the native MS windows software to broadcast my media files from the server to the TV that the DMA is connected to. I have install ushare on Fedora 12 and have not had much luck streaming media to the TV with it.
I have all the ports outlined in [URL] set to forward to the DMA, when accessing the server menu of the DMA "Fedora" shows in the server list but cannot be access. I either receive "starting server" or "Not authorized to browse this server" I have tried with router setting for UPNP enabled and disabled without any luck.
[Code]...
View 1 Replies
View Related
May 27, 2010
I have a test server on which I'd like to run up to 30 separate instances of a program as daemons, each running on a different IP address bound to the server. I've created a init script that takes an additional command line parameter - the last octet of the IP address. For example:
Code:
sudo myprog 40 start
sudo myprog 41 start
This would run instances of the program on IP addresses 192.168.1.40 and 192.168.1.41 respectively. But it's looking like this approach isn't doable if I wish to have any or all of these run at startup, as the links in the rcN.d directories can only link to the init script, not pass a parameter.
View 2 Replies
View Related
Jul 22, 2010
I have installed transmission on a headless server. I am using transmission-daemon and connects to the webclient on the LAN. However from WAN I can't connect. I have forwarded port 9091 in my router and it connects with the server, but I get 403: Forbidden.
Here is my settings.json file:
Code:
{
"alt-speed-down": 500,
"alt-speed-enabled": true,
"alt-speed-time-begin": 480,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": true,
"alt-speed-time-end": 0,
"alt-speed-up": 10,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"dht-enabled": true,
"download-dir": "/data/download",
"download-limit": 1000,
"download-limit-enabled": 0,
"encryption": 2,
"incomplete-dir": "/var/lib/transmission-daemon/info/Incomplete",
"incomplete-dir-enabled": false,
"lazy-bitfield-enabled": true,
"max-peers-global": 200,
"message-level": 2,
"open-file-limit": 32,
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 20683,
"peer-port-random-high": 20500,
"peer-port-random-low": 20599,
"peer-port-random-on-start": true,
"peer-socket-tos": 0,
"pex-enabled": true,
"port-forwarding-enabled": false,
"preallocation": 1,
"proxy": "",
"proxy-auth-enabled": false,
"proxy-auth-password": "",
"proxy-auth-username": "",
"proxy-enabled": false,
"proxy-port": 80,
"proxy-type": 0,
"ratio-limit": 0.2500,
"ratio-limit-enabled": true,
"rename-partial-files": true,
"rpc-authentication-required": true,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "password",
"rpc-port": 9091,
"rpc-username": "transmission",
"rpc-whitelist": "127.0.0.1,*.*.*.*",
"rpc-whitelist-enabled": true,
"speed-limit-down": 1500,
"speed-limit-down-enabled": true,
"speed-limit-up": 50,
"speed-limit-up-enabled": true,
"umask": 2,
"upload-slots-per-torrent": 4,
"watch-dir": "/data/download",
"watch-dir-enabled": true
}
View 4 Replies
View Related
Jan 26, 2010
i am succesfully installed TeamSpeak 3 server and now i want to startup it automatically without screen daemon and on every startup on linux ubuntu 9.10 i am using this command for start the TS3 server:./ts3server_linux_amd64 dbplugin=ts3db_mysqlin home/user/Desktop/ts3server_linux_amd64
View 4 Replies
View Related
Oct 13, 2010
I installed MySQL on my Ubuntu 10.04 desktop. As I need it only once a month I removed it from all runlevels but mysql is still running after boot up. "lsof" shows that it is running and listening for connections.
Code:
neo@ubuntu:~$ sudo lsof -i
[sudo] password for neo:
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 927 root 3u IPv4 7819 0t0 TCP *:ssh (LISTEN)
sshd 927 root 4u IPv6 7821 0t0 TCP *:ssh (LISTEN)
avahi-dae 945 avahi 12u IPv4 8107 0t0 UDP *:mdns
avahi-dae 945 avahi 13u IPv6 8108 0t0 UDP *:mdns
[Code]...
How can I evaluate what started the MySQL daemon? WHy is it running?
View 1 Replies
View Related
Dec 19, 2010
I am having some trouble making the dropbox daemon start at boot. I followed these instructions -> [URL], which are basically a replica of the original instructions from the Dropbox Wiki [URL]. The installation went fine, except that the machine still cannot start the daemon at boot. I tried to modify the init.d script a bit (see the attachment), but it still wont work (I am not sure if my changes made any significant difference, though). The daemon will only start if I invoke it manually after login with the command:
Code:
[user@machine:~]$ service dropbox start
Which executes the daemon just fine. I also tried adding this line of code to crontab:
Code:
@reboot /etc/init.d/dropbox start
This command starts the daemon if I check with the command "service dropbox status", but if I execute the official dropbox CLI command:
Code:
~/bin/dropbox.py status
it says that Dropbox isn't running and I still have to execute it manually.
P.s.: The machine runs Ubuntu Server 10.04, with all the latest system patches and updates.
View 3 Replies
View Related
Mar 11, 2010
I would like to be able to simply run a shortcut file or batch file in a windows os to start or stop my transmission-daemon.I was thinking about using putty to auto login and execute a file using the -m switch. A problem I am running into is that /etc/init.d/transmission-daemon stoprequires the use of sudo.That would require entering a password which would be automated and insecure or would require manually typing int he password.
View 1 Replies
View Related
Jun 19, 2010
I would like to run a server or ssh or ftp on a specific portSort of jailed daemon that runs with a login / pwd that is not /etc/passwd based to?
View 9 Replies
View Related
Sep 27, 2010
I've just installed subversion.I need to create a script /etc/init.d/svnserve that will start at boot time.I want to use start-stop-daemon --start so I can track my process and eventually kill it using start-stop-daemon --stop.My problem is that I can't get it to work and the documentation shows no exemple.
I've replaced $DAEMON by the whole line: svnserve -d -R -r $REPO_ROOT and got -d is not an option.I'm not quite sure what to do at that point. If someone has some experience with start-stop-daemon it would be great.
View 2 Replies
View Related
Jan 20, 2011
I'm more of a CentOS person, but after some issues on my new box I switched to Ubuntu server. I am working on getting it setup as a mail server (mainly for testing at the moment and soon be live). I performed apt-get install sendmail then apt-get install exim4 and got the message:Could not perform immediate configuration on 'exim4-daemon-light'. Please see man 5 apt.conf under APT:: Immediate-Configure for details. I have Ubuntu Server 10.10 32-bit on a Dell Intel Poweredge.
View 7 Replies
View Related
Feb 22, 2010
waht is kernek log daemon..? why kernel log daemon always stop and restart back automatic?
View 1 Replies
View Related
Mar 5, 2009
I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.
View 1 Replies
View Related
Jul 7, 2010
I have a script as report.sh which prints its out put in some file.Now I want to run this as a service so that when I start this service it shud run in the background and give me the out put.Again I should be able to stop it and I should able to configure its so that it can start when I start my system.What I have doneIn the /etc/servicesI have added report 5555/tcphen in the /etc/xinetd.d I have created a file report_com where I have given
service report
{
socket_type = stream
[code]...
View 8 Replies
View Related
