Starting mysqld daemon with databases from /var/lib/mysqli m installed mysql-5.0.77-4.el5_5.4
[root@serv ~]# mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
[root@serv ~]# /etc/init.d/mysqld stop
[code]....
I need some help.Trying to set up bugzilla on my VM.After setting up the IP to use static i could log on to the url its not even loading up from command line its issueing an error.when i try to log on to mysql
bugzilla:~# mysql -u root mysql] ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
installing mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:
Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?
I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:
Code:
root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock
[code].....
i'm not the most knowlegable person but i have successfully installed mysql in the past. but now that i am attempting to install it again i'm getting this error during installation. has anyone seen this before?
mysql error: *Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1
all of the website content will be on a separate partition called "/websites". I've got SELinux enabled, and set the context on /websites and subdirectories to "public_content_t", so that httpd (Apache) can access this partition. This works. However we also have mysql databases stored on this partition as well, and we are getting errors like this in /var/log/auditd/audit.log: type=AVC msg=audit(1286249333.390:326): avc: denied { search } for pid=6167 comm="mysqld" name="/" dev=sda3 ino=2 scontext=system_u:system_r:mysqld_t:s0 tcontext=system_u:object_rublic_content_t:s0 tclass=dir
I've tried setting the context to "mysqld_db_t" on the MySQL database folders, but it appears that it cannot get to the partition at all, or anything outside of /var/lib/mysql/. How can we get mysqld to access databases on this partition? Right now there are symlinks from folders in /var/lib/mysql/ that go to each database on /websites partition. Setting SELinux to Permissive mode gets everything to work fine. Basically with SELinux in Enforcing mode, we're getting errors in the PHP applications that httpd can't connect to the databases.
i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I was having issues with MySQL Server and uninstalled it. I still have my databases at /lib/var/mysql.
My question: if I install MySQL Server (same version, 5.1) again, will it delete my databases, or will they still work?
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedRelational databases usually have their data over in /var/lib/something. Users are in /home (with data in /var/www). How can I apply a single total disk space quota across all of these independent software systems (file systems, RDBMS, etc.)?
P.S. There's a bet going on around me as to just how awesome SU is. Let's see what you've got.
Mysql starting problem after changing mysqladmin password.I tried all the solutions available on forums, but not solve the problem.At last I restored the mysql db backup, this make mysql service start, but till other databases not showing all tables.
View 1 Replies View RelatedI am using CentOS 5 Both a production server and VM CentOS get this problem.When issue:
# /etc/rc.d/init.d/haldaemon start
Starting HAL daemon: [FAILED]
I use a version of Ubuntu Desktop Edition 9.04 and installed various server software useful for my needs.
New issue. How do I get MySQL databases working on this system, and how do I get myPhpAdmin to help manipulate said databases onto the system?
I need to move mysql databases from my hard drive which is currently in external box. I can't boot the drive since the laptop is down. Nothing of the distribution on the drive is missing. I just need to know which files/folders copy to my new computer to have all databases running. Old computer ran on Dreamlinux (Debian-based). I'm currently running Ubuntu 9.10.
View 5 Replies View RelatedI have installed mysql ,php ,apache,phpmyadmin i have create a forum on mysite check it on[URL]..Now i have create a database with name login and then i create a table with name loginn ..After that in loginn table i create colums with name username (data type=varchar),and password(data type=int);i want when someone entered username and password in my sql ,it goes to database and userconnect to next page as we generally do in orkut or other social sites;I dont know how to connect with php with mysql and how to do it whole
View 3 Replies View RelatedQuick searches did not bring forth any standard solution.
I have installed Ubuntu Server 10 (x64) using LVM with two disks (this is a Virtual Machine on VMWare ESXi4)
During install I selected only disk 1, and LVM guided Installation Added LAMP and SSH
Server gives only a text mode configuration, great if you are a linux guru, but I am not so it took a bit to find a stripped down GUI. None could be found but I did the following:
apt-get install xorg gdm gnome-core (minimal Gnome install)
apt-get install gnome-system-tools (users and *****s, time)
apt-get install gnome-network-admin (network config)
apt-get install update-notifier (updates)
[Code].....
I have created a similar system with Ubuntu, now I wish to move the var/www directory to sda1, and the databases from MySQL.
Trying to set up a backup for mySQL databases in CRON.
I've entered the following line in /etc/crontab:
Code:
7 13 * * * root mysqldump -u root -pMYPASSWORD --all-databases | gzip > /home/myuser/mysql_backups/database_`date '+%Y-%m-%d'`.sql.gz
grep CRON /var/log/syslog shows:
[Code].....
If I run the command outside of CRON, it creates the backups no problem, but CRON is not doing anything.
I have a laptop and a desktop PC, both running Ubuntu 10.04 and both are configured the same way. I am using Unison-gtk to sync the data between both computers... This works for everything... except for my mysql databases. Any way to simply sync my mysql databases on both computers. Right now I need to do this table-per-table... and it is quite long to proceed like this. What I need is a script or a program (open and preferably free) that would just compare both databases (all the tables) and sync them either by updating existing tables or by creating them. This should work both ways... obviously. I could write a script for this, but I am sure there already is something for this out there.
View 9 Replies View RelatedI have a system with opensuse 11.0 and mysql
After changing the administrator password only information_schema and test databases are shown in GUI tools (webmin or mysql administrator GUI tool). After the error I restored the password to the old used
if I use mysql in terminal, and use show databases; I can see the 7 databases that I have.
I aslo cannot access to any field using GUI tools (cannot acces to database permissions, or MySQL Server Configuration, host permissions or MySQL system variables). The error is:
DBI connect failed : Access denied for user ''@'localhost' to database 'mysql'
Do you know how to restore the view/access to databases?
How do I restore MySQL Databases from an old hdd with Ubuntu on it which won't boot? Information below is not necessary just explaining how I ended up in this situation. Today the harddrive crashed on one of my development servers and I have no recent backup of the MySQL databases on the server.
The stuff on the server weren't horrible important but it would still be nice if I were able to recover some of the files. This is the thing, I don't think the harddrive is entirely dead because it comes to a screen saying harddrive error something enter to continue then it says GRUB in the upper left corner before the computer crashes/reboots.
So I installed Ubuntu server on a new HDD and now I want to attempt to recover the databases from the old HDD by mounting it in Ubuntu but before trying I would like to know who one does that. As I've understood it's a bit more complicated then one might thing because MySQL uses binaries and not plain-files.
Rebooted my server after some funky stuff started happening with mysql. Turns out the drive that stores the mysql databases has gone missing. I did an fdisk, and the partition table is gone. I used gpart to see if there were any partitions available & there were -- two + one swap. Can you help me put this back together I know very little about reconstructing a table to use... Here is the output of what I've talked about...
b14:~# fdisk -l
Disk /dev/sda: 164.6 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders
[code]....
how can I display all databases and their size using command lines (linux) in a mysql server?
View 3 Replies View RelatedMy server is using MySQl mysql-5.0.77-3.el5 on Centos 5.4.When I check mysql log at /var/log/mysqld.log,it displays warning Quote:
100524 11:46:21 mysqld started
100524 11:46:21 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
100524 11:46:21 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
[code]....
I know very little about MySQL, but I've got some users that need it for testing on a Linux server.So I had set it up a while back, but now I'm running into some small problems.Right now, each user has his own database that I created and can do whatever with it. Each user only sees their own database.I didn't want them to be able to create new databases at all, but they can and when they do anyone can see them.
EDIT(Apparently they can only create databases beginning with the word "test" in the name)
I need to either:
1) Stop them from creating new databases (without affecting their ability to interact with the existing database)
OR
2) Make it so that when they create a database, only they have privileges on it and only they can see it (except mysql root of course).
Anybody know the statement to set these kinds privileges up?
EDIT: pfft... I've a read a bit more and realize that this is an intended part of the installation.
EDIT2
I'd still like to remove the ability to make test databases.
EDIT3:Ok, for reference this is how you prevent users from making and using test databases:
shell> mysql -u root -p
Enter password: (enter root password here)
mysql> DELETE FROM mysql.db WHERE Db LIKE 'test%';
mysql> FLUSH PRIVILEGES;
I've created a mysql user and he can connect Joomla to mysqld when everyone has full permissions to the mysql homedir but I know this is bad from a security standpoint. If I set mysql user as the only one with permissions then I can't connect. I know Joomla support is not very help from past experience, wish I could dump it for something else but it does work great once it is configured so I need to keep it around, can anyone make a guess as to what permissions I need to have set on mysql's home dir so that joomla can still connect yet I am more secure than now?
View 11 Replies View RelatedSince /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...
me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
I have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
