Fedora Servers :: DMA / Ushare - "starting Server" Or "Not Authorized To Browse This Server"
Apr 23, 2010
I have recently purchase a Dyxel DMA-1100p and have had a great success rate using the native MS windows software to broadcast my media files from the server to the TV that the DMA is connected to. I have install ushare on Fedora 12 and have not had much luck streaming media to the TV with it.
I have all the ports outlined in [URL] set to forward to the DMA, when accessing the server menu of the DMA "Fedora" shows in the server list but cannot be access. I either receive "starting server" or "Not authorized to browse this server" I have tried with router setting for UPNP enabled and disabled without any luck.
[Code]...
View 1 Replies
ADVERTISEMENT
Jan 21, 2010
I am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies
View Related
Jun 23, 2010
I have it downloaded (linux version). What folder should I put it in?? Does it matter?
I am new to bash so i dont know how to start the Ventrilo Server up.
I navigated to the folder the server is in and did ./ventrilo_srv and ./ventrilo_srv -d and they both come up "No such file or directory".
View 2 Replies
View Related
Jul 26, 2010
So recently my MySQL server doesn't startup when Ubuntu boots (it used to) and therefore causes database errors with my Web applications. How do I add MySQL to the run at startup list?
View 1 Replies
View Related
Jul 27, 2011
I'm trying to run BoxBackup to sync a couple active servers to a data server. I installed the server and client, making sure to follow the instructions closely with all the certificates. The problem is the service daemon on the service won't even start. The service manage reports: "bbstored dead but pid file exists" (basically, tried to instantiate the process, but it died due to faults).
Here's the log of the daemon in /var/log/box
Code:
Jul 27 13:05:10 frogbert bbstored[13429]: NOTICE: Box Backup Store Server v0.11rc8, (c) Ben Summers and contributors 2003-2010
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Starting daemon, version: 0.11rc8
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Using configuration file: /etc/boxbackup/bbstored.conf
Jul 27 13:05:10 frogbert bbstored[13433]: WARNING: Exception thrown: ServerException(SocketBindError) at ../../lib/server/SocketListen.h(232)
[Code]...
View 1 Replies
View Related
Feb 11, 2010
Running Ubuntu Server 9.10.I have a couple of programs that I would like to start at boot, they will both run forever. I have created a cron job with @reboot and that will start a program, but if I have multiple programs in there it waits for the first to finish before starting the next.
View 2 Replies
View Related
Oct 18, 2010
I recently installed an Ubuntu 10.04LTS server. I have zabbix-server on that machine, and I noticed that after reboot it won't start. Probabily, the mix of upstart and old init.d scripts result in zabbix starting when mysql is not active yet, in fact in zabbix-server.log I see it cannot reach db. How can I make sure zabbix-server waits for mysql?
View 9 Replies
View Related
Nov 22, 2010
I am trying to share files between Windows XP machine, ubuntu server, debian server and ubuntu desktop. But mainly between ubuntu server and Windows XP computer.I also like to learn samba, because probably I could do all this with ftp server as well.I set up and configured samba following the instruction on Online Ubuntu Server Guide.But when I run the command:sudo /etc/init.d/samba restartI get:bash: /etc/init.d/samba: No such a file or directory I don't know what is wrong?
View 9 Replies
View Related
Jul 18, 2011
I have a small Dell PowerEdge 1650 server with Fedora 12 loaded. We can access the internet, (Google, our home page, Etc.) but can not ping any local or outside IP addressed. Our internal computers can ping each other but not the server. No, it is not the server firewall because we also disabled it and still the same results.
View 9 Replies
View Related
Jul 15, 2011
I try use Rsync authorized by LDAP, but seem as this way is not available. Is that true?
View 2 Replies
View Related
Jan 17, 2011
Facing this issue where I need to ssh from a solaris server to Linux server.The flow is as below:
-Oracle Webserver on solaris server (oracle user) initiates a cgi script
-The CGI script then executes a shell on the solaris server that tries to ssh to linux server
Have already tried the below:
-Checked the permissions for the .ssh and related folder/files
-authorized keys updated correctly
-tried alternative ssh login from another user which works fine
Issue could be-
-I must try the first login manually, where I'll need to enter password and then the solaris server will get registered in the known_hosts of the linux server
-Cant do this because I donot have the oracle user access.
Please suggest a work-around to the issue that can be done from my end.
Or is it that I must simply ask the DBA to execute an ssh from their ends?
View 6 Replies
View Related
Jan 15, 2010
I've a DHCP server in RHEL 5 and 100+ users in my network. I mapped 30 users MAC address with ip. Rest are getting ip address automatically. In my network, users tend to move from one department to another frequently. I've created scopes according to departments. (i.e. Dept A - 172.19.54.10-172.19.54.30 and so on for other departments).
1) I want to configure DHCP server in this way, that a client have to autheticated by DHCP server before receive and IP address.
2) Second, Whether DHCP server have free IPs in scope, but only clients can obtain IPs those MACs are mapped, rest should not without authentication or authorization.
View 2 Replies
View Related
May 4, 2010
I am having many mails transferred through my Sendmail server,but I want to configure only authorised email address through our server.optimize my mail server's configuration.
View 3 Replies
View Related
Jan 21, 2010
A DHCP server in RHEL 5 and 100+ users in my network. I mapped 30 users MAC address with ip. Rest are getting ip address automatically. In my network, users tend to move from one department to another frequently. I've created scopes according to departments. (i.e. Dept A - 172.19.54.10-172.19.54.30 and so on for other departments).1) I want to configure DHCP server in this way, that a client have to autheticated by DHCP server before receive and IP address.2) Second, Whether DHCP server have free IPs in scope, but only clients can obtain IPs those MACs are mapped, rest should not without authentication or authorization
View 2 Replies
View Related
Apr 13, 2011
Two users on both Ubuntu server and Windows 7. Both users admins on Windows. Used SWAT to set up Samba. Printer is local to Ubuntu server. User A can access both file share and printer on Ubuntu server from Windows. User B can access the file share but can only see the printer, not use it. Have looked everywhere I can think of to find out why one user has access and the other doesn't on both Windows side and Ubuntu side. As far as I can tell, they are set up the same. Can anyone provide some direction on what I should look at to find out what might be preventing User B from being authorized to use the printer on Ubuntu?
View 2 Replies
View Related
Aug 18, 2009
i am facing a problem with my mail server,i get an error when sending mail to a specific domain group;
Aug 18 06:41:02 mycompany2 sendmail[16745]: n7I1Ab9m016743: mail.xyz.in.: SMTP DATA-2 protocol error: 571 Delivery not authorized, message refused
Aug 18 06:41:02 mycompany2 sendmail[16745]: n7I1Ab9m016743: to=<feedback@xyz.in>, delay=00:00:25, xdelay=00:00:24, mailer=esmtp, pri=166397, relay=mail.xyz.in. [xxx.xxx.xxx.xxx], dsn=5.5.0, stat=Remote protocol error
View 11 Replies
View Related
Mar 21, 2011
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies
View Related
Mar 18, 2010
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
View 12 Replies
View Related
Feb 22, 2009
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
View 1 Replies
View Related
May 5, 2011
i'm not the most knowlegable person but i have successfully installed mysql in the past. but now that i am attempting to install it again i'm getting this error during installation. has anyone seen this before?
mysql error: *Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1
View 6 Replies
View Related
Oct 3, 2010
Hey all, I need help here! Whenever I boot up Fedora 13 my computer just decides to stop doing things right before the graphical login screen comes up. The system starts up properly, but after the "local" program starts, it goes to the fedora-colored blue screen right before the login screen usually comes up. I can still bring up consoles with ctrl alt f1/f2 and switch the tty screens. Whenever I try to start the X server using the X or Xorg command, it echoes the usual stuff and then the screen goes black. After that, nothing happens. I can get out of X by using the classic ctrl alt backspace method.
I haven't checked any X logs other than Xorg.0.log, but I'll post the others for any special failures soon.
View 4 Replies
View Related
Feb 1, 2010
I'm trying to install postgresql 8.3 on Ubuntu 8.04 LTS server and I'm running into problems starting it. Commands I've done # apt-get install postgresql postgresql-common Things I've tried Starting it manually
# /etc/init.d/postgrsql-8.3 start
Nothing appears in my /var/run/postgresql When I try and start psql as the postgres user I get the following error psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? I've been following the docs at: https://help.ubuntu.com/community/PostgreSQL
View 2 Replies
View Related
Dec 31, 2010
Distro: Fedora 12
Package Mgr: Yum
Version: ushare 1.1a
Other: automatically running as daemon in runlevel (3)
Devices: Xbox 360 & Playstation 3
Note: I can access all of my linux server media via my game consoles. I am curious to know who else is utilizing "ushare" or similar software? Does anyone recommend something other than ushare? Anything better than "ushare?" Just curious
View 1 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies
View Related
Apr 6, 2009
I just setup an application (phpcollab) on a linux machine, I was able to browse the app using localhost, but each time i try browsing it using the ip address, a blank page loads with a message saying "No input specified".
Whenever I try browsing the app from other systems on the network, I get a page cannot be found error message even though the other machines are successfully pinging the linux machine's ip address.
I need to browse it with the ip address because the app is to be accessed from other machines on the network.
View 3 Replies
View Related
Jul 6, 2011
I tried to browse my home dir but I can not. I chown also with loek:loek /home Here is my sambaconfig:
[global]
workgroup = MYNETWORK
netbios name = LINUX
security = SHARE
log file = /var/log/samba/log.%m
[Code]....
View 3 Replies
View Related
Oct 14, 2009
I have a problem, I'm have a course at high school (webserver management) in class this morning we had to install apache, php, ftp and so on but I didn't finish on time so when I got home I was playing around. I'm on wireless here and changed the vm connection from bridge to nat.
normally we had to install apache using yum (yum install httpd) and start the service. that's what I did and then we had to go to firefox (or IE) and type the ip of our server. but when I do I get "problem loading page" instead of the apache default page. I've set httpd runlever 2 to 5 to on and rebooted. but still not working.
View 6 Replies
View Related
May 19, 2011
all the tutorials i found for ushare and mediatomb shows it installed on desktop and not server. it also requires an account to be logged in. once logged it, you have to run a command to start it up. some questions.
1) is there a way to run either one w/o having to log into an account? so if say i restarted the server, it'll run the programs w/o me having to log in.
2) i would like to specify a directory to share music and movies. is one better than the other? clients that i plan to use are songbird, itunes (maybe), and vlc - maybe xbox 360 and ps3. other client suggestions?
3) other dlna server suggestions? this will be running on ubuntu 10 or 11 desktop or server. but the main thing i'm looking for is what i mentioned in #1.
View 3 Replies
View Related
Apr 26, 2010
I installed a Fedora 9 server. I can download use wget or ftp but I cannot browse the Internet using build Firefox/Mozilla.
View 6 Replies
View Related
Aug 19, 2010
I have an HP proliant server n i am new to linux the problem i am facing is that when i start the system it turns ON normally but after the linux starting up options like when we select whether to start it normally or in failsafe mode after selecting one option out of the two it comes up with following messages on the screen and get stuck over there.
[messages]
I would have attached the snapshot i have taken with a camera but there is no option of attaching files overhere.
View 5 Replies
View Related
