CentOS 5 Server :: Start Nfs Services And Get Error "Starting NFS Daemon: [FAILED]"
Aug 29, 2011When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies
ADVERTISEMENT
CentOS 5 Server :: Timeout Error Occurred Trying To Start MySQL Daemon
Jun 2, 2011I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
CentOS 5 Server :: Error: Starting Dovecot Imap: Fatal: Listen(995) Failed: Address Already In Use?
Jun 28, 2009Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
SUSE :: Can't Start Nfs Server - "Not Starting NFS Client Services - No NFS Found In /etc/fstab/
Sep 13, 2010I cant start Nfs services. When I type the comman /etc/init.d nfs start I get "Not starting NFS client services - no NFS found in /etc/fstab/. I used yast to install nfs server already
View 9 Replies View RelatedCentOS 5 :: Error Starting Gnome Settings Daemon - Unknown Return Code 1
May 20, 2011Getting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.
CentOS 5 :: Timeout Error Occured Trying To Start Mysqld Daemon?
Mar 10, 2009I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedCentOS 5 Server :: Can't Start Mysql Daemon
Jul 26, 2011I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log
110726 16:03:10 InnoDB: Completed initialization of buffer pool
110726 16:03:10 InnoDB: highest supported file format is Barracuda.
110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761
110726 16:03:10 [ERROR] Aborting
[Code].....
Server :: Start Services Without User Login - Centos 5.5?
Oct 4, 2010I installed Centos 5.5 on a home PC to be used remotely.
All server daemons work fine but only start if the user is logged in.
How do I set the SSH server to start whenever the PC is turned on, rather than when the user is logged in? I read the chkconfig man page online but couldn't find anything.
Plus I put a script in my startup services to be run whenever the computer boots (I'm guessing when the users logs in). How do I go about setting that to run too whenever the system boots instead?
Server :: Starting Proftpd Failed On Centos?
Feb 6, 2010I recently had a problem with Proftpd, when execute proftpd return the next error:
# /sbin/service proftpd start
Starting proftpd: [FAILED]
the file configuration is:
CentOS 5 Server :: Integration Services Hyper-V (Error 2)
Nov 4, 2010I've installed CentOS 5.x (64 bit) on a Hyper-V Server R2. When I trying to install integration serices I get an error:
[root@localhost ~]# cd /opt/linux_ic_v21_rtm/
[root@localhost linux_ic_v21_rtm]# make
Building all modules...
make -C /lib/modules/2.6.18-164.el5/build SUBDIRS=/opt/linux_ic_v21_rtm/src modules
make: *** /lib/modules/2.6.18-164.el5/build: No such file or directory. Stop.
make: *** [all] Error 2
I am using:
Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I did everything as it shows on [URL].
General :: CentOS Hal-daemon Starting Fail
Jan 25, 2010I am using CentOS 5 Both a production server and VM CentOS get this problem.When issue:
# /etc/rc.d/init.d/haldaemon start
Starting HAL daemon: [FAILED]
CentOS 5 :: Starting RSHD Services On Centos 5,3 Box
Dec 18, 2009I need to copy files over from a Solaris 2.6 box to my machine running Centos 5.3. I have to use RCP since the Solaris box is so old that is the only inter-machine copy command available.How do I enable rshd services on my centos box? Detailed explanation would be apperciated since I am from the ssh generation.
View 5 Replies View RelatedFedora :: Pulseaudio Daemon Failed To Start?
Nov 24, 2009I've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.
View 9 Replies View RelatedFedora :: Abrt Daemon Failed To Start?
Jan 7, 2010I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686
[code]...
Fedora :: F12 - MySQL Daemon Failed To Start
Jan 25, 2010I using Fedora 12. When I am going to start MySQL server then error is come
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686
Fedora Servers :: DHCPD Daemon Failed To Start
Mar 5, 2009I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.
View 1 Replies View RelatedFedora Servers :: MySQL Daemon Failed To Start?
Apr 17, 2011I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?
View 10 Replies View RelatedCentOS 5 Server :: Named Failed To Start?
Apr 29, 2010I got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies View RelatedServer :: Hangs At Starting Domino Services During Booting Up?
Feb 11, 2010I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
Ubuntu Servers :: BoxBackup Server Daemon Not Starting?
Jul 27, 2011I'm trying to run BoxBackup to sync a couple active servers to a data server. I installed the server and client, making sure to follow the instructions closely with all the certificates. The problem is the service daemon on the service won't even start. The service manage reports: "bbstored dead but pid file exists" (basically, tried to instantiate the process, but it died due to faults).
Here's the log of the daemon in /var/log/box
Code:
Jul 27 13:05:10 frogbert bbstored[13429]: NOTICE: Box Backup Store Server v0.11rc8, (c) Ben Summers and contributors 2003-2010
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Starting daemon, version: 0.11rc8
Jul 27 13:05:10 frogbert bbstored[13433]: NOTICE: Using configuration file: /etc/boxbackup/bbstored.conf
Jul 27 13:05:10 frogbert bbstored[13433]: WARNING: Exception thrown: ServerException(SocketBindError) at ../../lib/server/SocketListen.h(232)
[Code]...
General :: Fatal Server Error:PAM Authentication Failed, Cannot Start X Server
Jun 29, 2011When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
General :: Error: Failed To Start The X Server
Aug 13, 2010I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
CentOS 5 :: Failed To Start The X Server After A Power Failure?
Oct 29, 2010Before to describe my problem I want to say that I searched a lot on the internet and I think I tried all the solutions provided by other users to similar problems.
I've got an IBM xSeries 346 server running CentOS 5.5 with all updates applied with yum.
The video card is an ATI Radeon (lspci says: 01:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]).
Everything worked fine until a bad day where there was an environmental power failure and the server crashed.
I turned it on, I manually check the file system, some files went lost and after the reboot the X server didn't start.
After the first boot I had problem with /etc/rc.d/rc.sysinit, sbin/multipath.static and /dev/cpu/microcode, I solved them and now the message it shows is:
"Failed to start the X server (your graphical interface) It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?"
I choose OK and it appears an empty log, if I go in /var/log/gdm and I do an ls -al:
total 0
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.4
-rw-r--r-- 1 root root 0 Oct 28 04:44 :0.log.3
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.2
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log.1
-rw-r--r-- 1 root root 0 Oct 29 04:52 :0.log
So a lot of empty log files.
I press enter on the OK that appears at the bottom of the screen and it says: Would you like to try to configure the X server?
I choose Yes, I enter the root password and appears the following messages:
Couldn't start X server on card 0
Couldn't start X server with old config, trying with a fresh configuration
Then another messages:
Trying to restart the X server, I press enter on OK and it loops the initial message ("Failed to start the X server...)
General :: Error - Failed To Start X Server (RedHat 5.3)
Mar 7, 2010I installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.
CentOS 5 Server :: Bind 9.3.6 - Named Service Start Failed ?
Oct 12, 2010I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedCentOS 5 Server :: VsFTP Iptables Wont Start Get Error - CentOS 5.5
May 11, 2011i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
Server :: PHP Installation On Centos Server - Error: Mysql Configure Failed
Nov 19, 2010I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
CentOS 5 Hardware :: HAL Daemon Fails To Start / Reason Of This?
May 6, 2009When I reboot my laptop compaq nc4400, HAL daemon fails to start.
what should I do?
Is this the reason why there's No Network devices available on my top right hand corner of my machine?
Debian :: Apache2 Start Error Starting Web Server: Apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost?
Dec 9, 2009I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
OpenSUSE :: Ifolder: Error: Cannot Start The Local Web Services
Jul 5, 2011I'm trying to use Ifolder but after the splash screen, I got this error message:
Code:
Error: Cannot start the local web services.
Error: The Simias process failed to initialize.
Use the command line switch --showconsole to view the error.
[Code]....