Networking :: OpenWRT Is Connected To Internet But Network Clients Can't?
Nov 20, 2010
got an asus wl500gp v2 and i just had to reflash it. Flashing went through fine, but while setting up the PPPoE connection I got stuck. Here is what the configuration looks like:ADSL Modem ---Ethernet--- Router ---Ethernet--- Laptop I set up OpenWRT to connect over PPPoE over the WAN port and the connection is established:
PAP authentication succeeded
peer from calling number XX:XX:XX:XX authorized
replacing old default route to br-lan
[code].....
View 3 Replies
ADVERTISEMENT
Jan 24, 2011
I'm looking to be able to view the connected clients within the OpenWrt 10.03 software.
View 1 Replies
View Related
Feb 24, 2011
On the 25th of January, one of my computers randomly stopped being able to connect to the Internet. It was running a dual boot (Ubuntu 10.04.1 LTS & Windows XP SP2), and is connected to the network via an ethernet cable (no wireless). According to the Network Manager, everything is working okay (there was no change from when I was able to access the Internet).
When I would use Firefox, I would get the message "Waiting for (page)...". However, this is not a Firefox only problem, as every program requiring Internet access (e.g. Evolution) is unable to connect to the Internet.
I compared the Internet settings to those of my father's Windows XP SP1 computer, which is able to connect to the Internet. There was no difference, except for the IP Address and Hardware Address. Because of this, I incorrectly deduced that either the actual Ethernet cable or the wall plug was faulty. I tried using a different cable and connecting to the Ethernet wall plug used by the aforementioned computer. Nothing changed. I was still unable to connect.
I didn't worry about it until Tuesday, when my other computer had exactly the same problem. It is running a triple boot between Ubuntu 10.04.1 LTS, Ubuntu 9.04 and Windows XP SP2, and I am unable to obtain Internet access using any partition. As with the previous case, my computer showed no change in the Internet settings, and the computer also shows it as being connected to the network. It is also connected via an Ethernet cable.
View 1 Replies
View Related
Mar 13, 2011
I have a Toshiba Satellite L505D-GS6000, and I installed Ubuntu before and it worked flawlessly until I decided that I had to go back to Win7 because of certain program compatibility issues.I'm back here trying to set it up and am having no issues except for with my wireless. I can see all of the SSID's, I am able to connect to my wireless, and it displays that I have been assigned an IP and all of the other settings given by DHCP.
I have been trying to fix this for hours, googled, searched these forums, and have spent time with some people on the Ubuntu IRC channel and we are unable to come up with a fix.
Print out of sudo lshw -C network:
Quote:
*-network
description: Wireless interface
product: RTL8191SEvB Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
[code]....
The strange thing is that although nothing will load when I try to visit facebook.com, google.com, or any other website... I opened the update manager and I noticed that it would download for 30ish seconds, stop and do nothing for 60ish seconds, resume for another 30, stop, resume, etc. until it finished. I am able to ping my router, and 8.8.8.8, but I am unable to ping [URL].
View 9 Replies
View Related
Sep 7, 2011
I just installed a dualboot win7/F15 on my laptop (dell XPS 15) and everything seems to be working fine except that when I connect to my network it is connected and the network is accessible (I can visit my gateway/ router) but when I try to visit a website it simply never ends loading it.Internet is working on win7 so it isn't my network's fault.Now I found somewhere that updating could help but since I dont have internet I can't update
View 3 Replies
View Related
Nov 9, 2010
I upgraded to 10.10 the day it came out, and haven't had any problems with internet stuff. My wireless card works without any proprietary drivers. Last night, the computer stopped connecting to the internet. I am still connected to my wifi network, but I can't do anything online. I had assumed that my internet connection was just down in general, and tried resetting the computer, shutting down the computer and then turning it on again, and rebooting the modem, but then my Xbox connected, and my laptop running 10.04 connected, so I'm confused as to what is going in. Any ideas?
View 2 Replies
View Related
Sep 17, 2009
if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
View 1 Replies
View Related
Mar 24, 2010
Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
View 2 Replies
View Related
Apr 10, 2010
I'm running Ubuntu 9.10 with fluxbox installed. Occasionally my internet connection will stop working, but when I check on wifi radar, I'm still connected to the network. The router is not plugged into a computer at the moment, just the cable jack. It is likely a hardware problem however, since my other laptops also experience disconnects. Any help beyond "change the cable" would be greatly appreciated. For instance, even though I am connected to the network, I cannot post at the moment due to lack of internet connection.
View 1 Replies
View Related
Apr 26, 2011
can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies
View Related
Aug 21, 2010
I want to set a up a network of inter connected pcs, for example on pc A linux is installed.now pcs B, C , D, etc should connect to A and do there work, for example A want to do C/C++, development, whereas B wants to do some PERL development or whatever, this is just an example, 2 different pc users might do same work also, and the connecting pcs may have Windows or linux or bsd.OSes now what h/w or s/w is required and what steps are required to set up this network, main pc would be connected to internet and also connected pcs might want to use internet also..have installed opensuse edulife , and use this as PC A for testing.. and I use bridged dsl Broadband connection to connect to internet , by the username and password provided by the ISP, in windows its easy to setup this connection, however not able to do on linux,
View 9 Replies
View Related
Jun 22, 2011
I recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.
View 6 Replies
View Related
Jan 31, 2010
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
View 6 Replies
View Related
May 15, 2011
I have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
View 2 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
Aug 17, 2010
I'm using SuSE 11.3. I have installed this betavine stuff with which I can use my Vodafone mobile connect usb device. (vodafone-mobile-connect-2.10.01-1.noarch.rpm + dependencies.) I was able to get it to run, it can connect, I can even send text messages (SMS) with it.
However, if I try to use the internet, the system behaves as it wasn't connected to it at all. ping doesn't see anything, neither does firefox etc. I have turned off all proxy and firewall settings.
I suppose I should tell Linux to use this connection for the internet, but how? Do I have to configure something with NetworkManager?
View 7 Replies
View Related
Mar 2, 2010
I have a compaq cq40-133tu laptop. I have windows vista ultimate and ubuntu 9.10 parallely installed. Most of the time i use Ubuntu for programming purpose. But for internet connection i have to go to windows. This is because ubuntu is getting connected to the network but is unable to access internet, whereas the windows can. I want to totally abandon windows. Recently i got internet connection in ubuntu for just 15 minutes or so when i ticked the option AVAILABLE TO ALL USERS. but after that the same story continues and iam not able to access internet. Details about Internet connection: This is not my connection, these signals come from nearby building. Its a wifi open public network.
View 9 Replies
View Related
May 16, 2011
I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
View 1 Replies
View Related
Jul 2, 2010
I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.
View 4 Replies
View Related
Jul 1, 2010
I'll state the issue and then give whatever extra details are needed. I'm running Ubuntu 10.xThe Linux box is connected to a router via ethernet. That Linksys router is bridged to an AT&T router.The bridging is working fine. The AT&T router's page shows the IP of the Linux box and lists it as a device. The Linksys page shows no errors with packet transmission and receipt. I can ping the Linux box from any client on the AT&T router, and can ping the AT&T clients from the Linux boxI had set the IP of the Linux box to192.168.1.201 while configuring that router, as I had set that router to 192.168.1.200 and it just seemed orderly.The network preferences show eth0 being set to auto dhcp, but the IP is still set to .201 so I don't know that it actually released or renewed.
View 5 Replies
View Related
Jun 18, 2009
having trouble connecting to many websites due to recent actions of the Iranian government on banning a lot of websites.That's why, I decided to make my computer act like a bridge for their computers, so that they can surf the web using my Internet connection in US. I have Arch linux running on my desktop. I tried to install OpenVPN based on the instructions at ArchWiki page, but I had no success. I guess OpenVPN is too much for what I want to achieve and ArchLinux repositories don't have all the necessary packages to configure it based on some posts I read.
View 3 Replies
View Related
Sep 13, 2010
i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.
View 5 Replies
View Related
Jan 7, 2010
i have successfully setup PPTPD on my server and I can open a VPN tunnel but my clients can only ping the server's IP, they don't have access to the internet through the VPN.
i have searched different forums and understand that I have to create a route on the server to route packets between the VPN interface and my internet gateway, but I didn't manage to get this work.
here is what my setup looks like:
Code:
root@r31495:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:c0:c7:13:35
inet addr:94.23.197.XX Bcast:94.23.197.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 9 Replies
View Related
Jan 26, 2010
I already have Linux Enterprise 5 system installed with some server packages such as Webmin, Active Directory, Web Server which also act as Internet gateway. Now I want to add firewall functionality to block clients ip accessing internet.
View 14 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
May 12, 2010
I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
View 1 Replies
View Related
Jan 30, 2010
I'm trying to give some windows users a permanent connection to a samba share behind a firewall over the public Internet. I know I can give them access with something like winscp (which they have done) but really I'd like to do it with a VPN so it seems seamless to the user. However I have no idea how to set up the server to support this and am finding the documentation a bit confusing. The samba share is on a Debian box and the firwewall is a Linksys WRT54GL.
View 1 Replies
View Related
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
View Related
Apr 14, 2011
Yesterday I updated my kernel, and then i could not run my wireless card, since I use the broadcom STA driver and there was no update on rpmfusion yet.
I googled and downloaded akmod, and all got fixed after a reboot.
Latter last night, i got an update message in wich, among other updates, was rmpfusion's aforementioned update, I installed it.
After a reboot, I am connected to my network, ifconfig throws normal stuff (default gateway, ip adresses and subnet mask) and i LOOKS like there should be no problem
however I'm unable to connect to any website, or access any remote server via ssh, or ping anything.
Also, i disabled ipv6 in firefox just in case, and it was no use.
View 6 Replies
View Related
Aug 24, 2010
This is my second day with ubuntu on a dell mini 10v with broadcom wireless card. I hooked up to a wired connection and ubuntu installed the drivers for the broadcom card.When I put the cursor over the wireless icon on the desktop it shows the name of my wireless connection,active,and my ip address but when I open firefox I get a "server not found". I'm confused as what to put in the boxes for ssid,mode,bssid,mac address,and mtu under network connections. I've tried pretty much every conceivable method at my disposal,even went on my d-link router settings and nothing has worked.I do not have windows installed,using 10.4
View 1 Replies
View Related
