Ubuntu Servers :: 'Zend Optimizer Not Installed' After I Updated To 10.04

May 4, 2010

I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there

Code: zend_extension=/etc/php5/ZendOptimizer.so.Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server.

View 3 Replies


ADVERTISEMENT

Ubuntu :: Can't Seem To Get Zend Server CE Installed

Apr 21, 2010

I can't seem to get Zend Server CE installed on my fairly fresh Ubuntu 10.04 installation.

View 9 Replies View Related

Ubuntu Servers :: Installing Zend Server \ When Log In To The Admin Interface, It Told It Couldn't Start The Webserver?

Oct 18, 2010

I had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:

mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5
Reading package lists... Done
Building dependency tree

[code]....

View 2 Replies View Related

Ubuntu Networking :: Installed 9.10, Updated, Now Internet Won't Work

Jan 30, 2010

All my other systems work fine, tried setting mtu to 1492. Everything is set manually in network connections. Tried deleting and making a new connection. I set the dns servers in the /etc/resolve (don't remember the exact path.) I can ping servers fine. This was a fresh install of 9.10. Again, the internet worked fine until I installed the updates from the update manager.I had internet problems when I first started using ubuntu a couple years ago.

View 1 Replies View Related

Ubuntu Installation :: Packages Marked As Updated Actually Not Installed

May 8, 2011

I did a clean install of 11.04 this morning. Upon logging in, Update Manager appeared, telling me there were 67 packages to upgrade. I obliged, and the update progress window appeared, as usual. At this point I realized it was not a convenient time to install the updates. No progress had yet been made; Update Manager had not downloaded anything, the progress bar had not moved, and the status was "waiting". I canceled the update and closed Update manager. However, upon running it again, it thinks that it successfully installed all the packages. In the "Ubuntu Software Center" Update history, it shows all those packages as having been updated with a timestamp of when I canceled the update. Apt-get and aptitude will not update the packages either. It seems like the packages have been marked as updated even though no update was installed. How can I rectify this problem and get the package managers to actually install the updates?

View 7 Replies View Related

Slackware :: Updated The Packages Installed Via Sbopkg?

Jul 18, 2011

I am really enjoying recently slackware. Using slackpkg and sbopkg it is so easy to keep slackware running current. Sometimes I feel like a master of Linux, which is absolutely no true. Apart of some objectives I have regarding slackware's philosophy, I have this question please. I have about 8 packages installed via sbopkg. my question.

1)Is there a way to keep these packages updated via a program? (If not I guess I am obliged to check manually for each of them.) 2) Also, sometimes when we build a package via sbopkg it is necessary to build other packages. Is there an option to install via sbopkg and the package and its dependencies required through just one command?

View 8 Replies View Related

Fedora :: Updated To 15 - And Installed My Fglrx / Catalyst Ati Drivers ?

May 26, 2011

Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.

View 7 Replies View Related

Ubuntu :: Jaunty 9.04 - Installed To Toshiba L450-02n And Updated The Updates - Wireless Does Not Work

May 27, 2010

Ubuntu jaunty 9.04 and i installed it to my toshiba l450-02n and i updated the updates. one thing is the wireless does not work.

View 9 Replies View Related

OpenSUSE Install :: Update The Various Libraries To Be Able To Get A Updated Version Of Firefox Installed?

Aug 10, 2010

I havent used Linux in a long time. I dug up an old copy of Suse (version8.2), and installed it on an old 599MHZ PC. Ive been trying to update the various libraries to be able to get a updated version of Firefox installed. Is there any chance that this can work? I need to know if Im wasting my time and should just put winxp on this PC. Also, I cant get any repositories working. I assume the default ones I have on the Suse installation are bad and the ones for the later versions will not work.

View 9 Replies View Related

Ubuntu Servers :: 8.04 LTS - How To Get Updated Version Of PHP

Dec 3, 2010

How can I get an updated version of PHP on Ubunut8.04LTS? I think the version that is on it by default is php5.2.1 - I need to use 5.2.10 at least for a web based application I use. Is there a way to tell Ubuntu to use this version - I don't what to go to 10.04LTS as that has php5.3 I think. If I manually install php 5.2.10 it might get messy and will Ubuntu damage it when I run an apt-get update?

View 1 Replies View Related

Ubuntu Servers :: Date And Time Not Updated On 8.10?

Aug 31, 2010

On my virtual machine ubuntu 8.10, the date and time settings are not updated every time when I restart the machine.

View 2 Replies View Related

General :: CentOS - Safe To Remove The First Kernel In The Installed List To Save Having Two Kernels Being Updated Everytime?

May 8, 2011

When I run yum list installed command the output shows two kernels:

[Code].....

Would it therefore be safe to remove the first kernel in the installed list to save having two kernels being updated everytime I run yum update? Or is the PAE kernel dependant upon the original?

View 6 Replies View Related

Ubuntu Servers :: Updated Packages Now Php/mysql Is Not Working

Oct 31, 2010

Code:
PHP Deprecated: Comments starting with '#' are deprecated in /etc/php5/apache2/conf.d/mcrypt.ini on line 1 in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib

[Code]....

I have checked for directories and the file it is looking for does not seem to exist. the only file in that folder is pdo.so

View 3 Replies View Related

Fedora Servers :: Apache Updated - Reporting 2.2.0 On Any Error Page

Sep 1, 2009

But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.

View 3 Replies View Related

Ubuntu :: Can't Uninstall Zend Studio

Mar 23, 2010

I navigated to usr/local/zend/zendstudio-7_1_2/uninstallzendstudio folder and there are some files, one of them is uninstallzendstudio i double clicked it, and chose RUN .. but it gives me error : you do not have sufficent privileges to perform uninstallation, fix the problem ..

View 3 Replies View Related

Fedora Servers :: Check In Dates Getting Changed / Updated To System Time

Jun 21, 2011

I am using the default CVS available in Fedora 9. I initiated the CVS server by
cvs -d /usr/local/cvsproj init
To check-in and check-out the following exports commands are used
export CVS_RSH=ssh
export CVSROOT=:ext:swathi@SERVER:/usr/local/cvsproj

I shall explain problem by taking an example. A project was checked in long before (for example the checkin date is 25 Feb 2010). And today (i.e. 21 June 2011) I checked out the project from the repository. After checkout, the date of the project in the repository is changed from 25 Feb 2010 to 21 June 2011. This date is set to all the subfolders in that project. But the files in the project retains the checking date i.e. 25 Feb 2010. Why the check-in dates are getting updated/changed to the system time after doing check-out.

View 2 Replies View Related

Ubuntu :: Configure Eclipse PDT With Zend Debugger?

Apr 14, 2011

I've been using Eclipse PDT with Zend Debugger to debug my PHP web scripts for a while, but after installing Ubuntu 10.04, I've been having issues setting up the development environment again.

I have installed Apache 2.2.16 and PHP 5.2.14 manually.

Eclipse was installed from the Synaptic Package Manager. I installed the Zend debugger and PDT for Eclipse under Eclipse's Help -> Install New Software.

Yet whenever I try to debug a web script it executes the script without stopping at any of my breakpoints. The debug window immediately shows the debug session terminated.

The end of my php.ini file located in /usr/local/lib says:

Code:
[Zend]
zend_extention=/home/nathan/ZendDebugger.so
zend_debugger.allow_hosts=127.0.0.1
zend_debugger.expose_remotely=always

[Code]....

View 1 Replies View Related

Ubuntu :: Setup Zend Framework On System?

Aug 8, 2011

Does anyone knows a good website that discuss on how to setup zend framework on Ubuntu? I'm currently using windows as my web server, and I would like to try it in different OS.

View 1 Replies View Related

General :: Updating Zend Engine API On Centos 5.6 Os

May 25, 2011

I did an easy apache update and ever since have been getting an error about the Zend engine...

Quote:

Zend Guard Loader requires Zend Engine API version 220090626.

The Zend Engine API version 220060519 which is installed, is outdated.

I have searched for answers on how to update the Zend engine, but can not find much at all and wondered if anyone here has encountered a similar message and knows what I might do.

My system details are
Apache 2.2.18
CENTOS 5.6 x86_64
cPanel/WHM
PHP 5.3.6
Zend Optimizer/Guard Loader for PHP
3.3.9 -

View 1 Replies View Related

Software :: Uninstalling Zend Studio For Eclipse Using A .bin File

Mar 2, 2010

I have installed Zend studio for Eclipse using a .bin file and now I want to uninstall this software. I found the directory where it is installed....the directory structure is given below:

Quote:
-rw-rw-r-- 1 root root 44691 2010-02-22 20:35 InstallScript.iap_xml
-rw-rw-r-- 1 root root 3226 2010-02-22 20:46 installvariables.properties
-rw-rw-r-- 1 root root 1532010 2010-02-22 20:35 uninstaller.jar
-rwxr-xr-x 1 root root 48033 2010-02-22 20:35 Uninstall_Zend_Studio_for_Eclipse_-_6.0.1
-rwxrwxr-x 1 root root 3511 2010-02-22 20:35 Uninstall_Zend_Studio_for_Eclipse_-_6.0.1.lax

Now I want to know how to use these files to uninstall the software?

View 1 Replies View Related

Fedora :: Login Missing After Apache / Zend Server Installation

Jan 9, 2011

I am new to Linux. I installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP. During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost. I removed all "zend-server" like stuff from "Add Remove Software" screen. Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php) via terminal. Apache installed correctly and started workeing again ok on localhost. Then again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".

I shut down my pc thinking everything is ok now. Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me balloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore. I remember one thing that during reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?

View 11 Replies View Related

Ubuntu Servers :: 10.04 - Post Login Message Says "133 Packages Can Be Updated" - Not?

May 5, 2010

With: Code: sudo apt-get clean ; sudo apt-get update ; sudo apt-get upgrade I get:

[Code]...

View 6 Replies View Related

Fedora Installation :: Yum Broken After Install Of Php-5.3-extra-extensions-zend-server

Oct 4, 2010

I'm a PHP developer trying to switch from Windows to Linux. So I'm new with Linux. I tried to google for a solution and tried the suggested wiki FAQ but with no success.I wanted to install zend-server-ce-php-5.3 today with yum. This worked okay.After this I tried to install php-5.3-extra-extensions-zend-server. This seemed to work.

View 3 Replies View Related

General :: Loading Php Module Without Restart Apache / Load Zend Extension Using '-z'?

Sep 23, 2010

I need to load php module without restart/reload apache, is there a way to do that, php has its option to load zend extension using '-z',

php -z <filename>

is there anyway because I need to load php module in runtime, that I don't want to loose the live running session.

View 1 Replies View Related

Ubuntu Servers :: How To Tell If Package Is Installed

Mar 19, 2010

What's the best way to tell if a package is already installed? I can't seem to find a way to do it with apt-get.

View 5 Replies View Related

Ubuntu Servers :: Squid 3 Installed But Did Not Run

Jun 3, 2010

I am an avid ubuntu desktop user, however I started working at a company that runs their firewall, mail and proxy server on centos 5.2, all was working well so never needed to tamper with it, however we (myself and the administrator) randomly decided to install squid3 for its features, the install went well, however squid3 didnt run as we wanted it to, after looking into it reading some material on the net, we realised how stupid we were to not to test it -sigh- so weve purged and removed it and reverted back to 2.6, now however we even have issues with that too, we install squid 2.6 and start the service and we get errors that stop, and starting fail, however the status of squid shows its running. How to get it back to working order?

View 3 Replies View Related

Ubuntu Servers :: GUI Programs That Can Be Easily Installed On 10.04?

Sep 28, 2010

I wanted to set up a small file/print server using Ubuntu. I'm planning on using a spare nano ITX board running C7 processor with 2GB and an 80GB drive for right now. I've set up desktop and systems and like using KDE. I've read installing KDE and X Server and have had problems running on 10.04. I can run command line but wanted to know if there are there any good GUI programs that are reasonably easy to install on server 10.04?

View 4 Replies View Related

Ubuntu Servers :: New Server 10.10 Installed - Out-of-the-box Security?

Oct 11, 2010

I've just setup a new Ubuntu Server 10.10 serving SVN through Apache (HTTP, HTTPS).It seems all ports are open by default on this new server. Why is this? Do I need to lock it down with iptables, or is it secure as it is anyway (somehow)?

View 6 Replies View Related

Ubuntu Servers :: How To Get Nessus Package Installed

Nov 4, 2010

I want to install nessus. I run the following in the terminal:
sudo apt-get install nessus
I get a message that the package is not available and anther package replace it. However I am interested in nessus and not in openvas-client (the other package). So how can I get the nessus package.

View 5 Replies View Related

Ubuntu Servers :: Install The GUI Or Is There A Server With The GUI Pre-installed

Dec 27, 2010

im totally rubbish at command line. I have a small business server for home use, thats where i work from. I have Windows Small Business Server but a lot of the time its crap and am trying Linux. I have Ubuntu 10.10 installed on a desktop and while im new to it im very impressed. I also have a MAC and i must say id rather have Ubuntu.

Now i want to use Linux Server but its all command line and i want the GUI. Iv tried to do this on Ubuntu Server 9.04 and no sucess at all , iv followed the instructions from other posts, (1) sudo apt-get update, (2) sudo apt-get install ubuntu-desktop and nothing works. Is there a way to install the GUI or is there a Linux Server with the GUI pre-installed?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved