General :: Updating Zend Engine API On Centos 5.6 Os
May 25, 2011
I did an easy apache update and ever since have been getting an error about the Zend engine...
Quote:
Zend Guard Loader requires Zend Engine API version 220090626.
The Zend Engine API version 220060519 which is installed, is outdated.
I have searched for answers on how to update the Zend engine, but can not find much at all and wondered if anyone here has encountered a similar message and knows what I might do.
My system details are
Apache 2.2.18
CENTOS 5.6 x86_64
cPanel/WHM
PHP 5.3.6
Zend Optimizer/Guard Loader for PHP
3.3.9 -
View 1 Replies
ADVERTISEMENT
Feb 7, 2010
I have just downloaded CentOS 5.3. The kernel version is 2.6.18.xx However, when I updated the kernel version has not changed. Still 2.6.18. Unless something went wrong with the updates. The most up to date kernel is 2.6.31.xx I was thinking shouldn't it update to this new kernel? On my Fedora 12 I have 2.6.31. However, I thought the kernel of 2.6.18 would have been updated as least a little.
View 4 Replies
View Related
Oct 11, 2010
So i have a small home server i need to setup. I used to have arch linux installed, but i found it unstable and more difficult to maintain. So i heard about the stability if CentOS and decided to try it out. I got samba setup no problem, but cups i cannot get to work. The orinter driver for my epson workforce 500 requires lsb 3.2 whereas lsb installed in centos is only 3.1. What can i do to fix this? Should i just go with fedora instead?
View 8 Replies
View Related
Aug 19, 2010
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
View 1 Replies
View Related
Sep 23, 2010
I need to load php module without restart/reload apache, is there a way to do that, php has its option to load zend extension using '-z',
php -z <filename>
is there anyway because I need to load php module in runtime, that I don't want to loose the live running session.
View 1 Replies
View Related
Mar 11, 2010
I've looked through the forums and found that installing openmotif may fix my problem. I tried it but to no avail. Here is my challenge, I'm trying to install Grid Engine on my VMWare fedora installation. I get this dependency error:
Quote:
rpm -i sun-sge-bin-linux24-x64-6.2-5.x86_64.rpm
error: Failed dependencies:
libXm.so.3()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
libXp.so.6()(64bit) is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
sun-sge-common = 6.2 is needed by sun-sge-bin-linux24-x64-6.2-5.x86_64
I installed the latest version of openmotif and when I do a search for the two files, there is no libxm.so.3 but libxp.so.6 is there. When I try to install the rpm again I still get the exact same error.
View 5 Replies
View Related
Mar 14, 2011
I am somewhat familiar with SGE (Sun Grid Engine, now Oracle Grid Engine) commands but am having a problem when running parallel jobs.
Present Machine configuration:
machine I - 12 cpus
machine II - 12 cpus
machine III - 12 cpus
.... so on ...
One_machine - 16 cpus
(I have all machine of 12 cpus and 1 machine having 16 cpus)
I want to schedule jobs on these machine such that if I ask for 12 cpus - my jobs should execute on any of the machines which has all 12 free cpus (eg machine I or machine II) in this case.
Eg. suppose I ask for 24 cpus
Option I : 12@machine1 12@machine2 ----- I need this
Options II : 10@machin1 10@machine2 4@machine3 ---- I don't need such a distribution
Hence, Option I is ideal here. Also, when running 12 jobs on machine1 (say) - even if all 12 cpus are not being used at some instance of time, none of the 12 cpus should be freed.
In short, until my run finishes, all blocked cpus should remain blocked.
If you may understand, the purpose here is to run some performance tests.
I'm using 'qrsh' to launch jobs.
View 1 Replies
View Related
Jun 15, 2011
I loaded Avast anti virus into Ubuntu 10.10 this morning. It seemed to go okay and uploaded the updates. But then it stopped. Now when I try to start it I get the following error message. 'An error occurred in avast! engine: Invalid argument'
View 1 Replies
View Related
Mar 13, 2009
Until recently the secure log was working as expected, then suddenly it has stopped logging. No changes made that I'm aware of, though automatic updates via yum are occurring. I'm assuming this is all logged through klogd, which is running.
Not overly familiar with Linux logging, where should I be looking for problems?
View 4 Replies
View Related
Apr 3, 2009
Ever since I've updated to 5.3 i get following error trying to update with yum :
[root@athena ~]# yum update
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile[code].....
View 4 Replies
View Related
Aug 3, 2009
My server's manufaturer (supermicro) only provides RAID drivers for certain RHEL (CentOS) releases, 4.4, 5.2 and 5.9 are presently available. An accidental yum update recently took the server from CentOS 4.4 to 4.7, and abandoned the RAID driver. My choces are to reload 4.4 or go to 5.2. Since I will probably do the latter, is there a way to have yum just update within the distro, and not the distro version? Can someone ID the rpms I could exclude to be sure that the OS version remains static?
View 3 Replies
View Related
Mar 23, 2010
I navigated to usr/local/zend/zendstudio-7_1_2/uninstallzendstudio folder and there are some files, one of them is uninstallzendstudio i double clicked it, and chose RUN .. but it gives me error : you do not have sufficent privileges to perform uninstallation, fix the problem ..
View 3 Replies
View Related
Apr 21, 2010
I can't seem to get Zend Server CE installed on my fairly fresh Ubuntu 10.04 installation.
View 9 Replies
View Related
Apr 28, 2009
way of updating only the security packages on CentOS?
If I do a yum update. It updates everything and creates a new version which will unnecessarily uses space along with the old version. I don't want this to happen. way of updating only the security packages and keeping my old version of CentOS?
View 2 Replies
View Related
Dec 23, 2009
Is it possible to set a package in such a way that it will not update when "yum update" is executed?
View 1 Replies
View Related
May 10, 2011
I have an error message at updating centos 5 x64.
View 3 Replies
View Related
Aug 27, 2011
I have been told by the staff from supermicro to update my BIOS, but they only have .exe to update. I ask them if they can help me to update my bios from Centos, and this is what they said
You can use RHEL driver: [URL] use same kernel driver for CentOS as RHEL. I'm really new with Centos OS, can you guide me on how would I be able to update my software via RHEL Driver? I see alot of RPM and images.
View 1 Replies
View Related
Apr 14, 2011
I've been using Eclipse PDT with Zend Debugger to debug my PHP web scripts for a while, but after installing Ubuntu 10.04, I've been having issues setting up the development environment again.
I have installed Apache 2.2.16 and PHP 5.2.14 manually.
Eclipse was installed from the Synaptic Package Manager. I installed the Zend debugger and PDT for Eclipse under Eclipse's Help -> Install New Software.
Yet whenever I try to debug a web script it executes the script without stopping at any of my breakpoints. The debug window immediately shows the debug session terminated.
The end of my php.ini file located in /usr/local/lib says:
Code:
[Zend]
zend_extention=/home/nathan/ZendDebugger.so
zend_debugger.allow_hosts=127.0.0.1
zend_debugger.expose_remotely=always
[Code]....
View 1 Replies
View Related
Aug 8, 2011
Does anyone knows a good website that discuss on how to setup zend framework on Ubuntu? I'm currently using windows as my web server, and I would like to try it in different OS.
View 1 Replies
View Related
Nov 4, 2009
I've been working at creating a highly available set of host servers for a linux diskless boot cluster.Each host machine is fitted with redundant power supplies and two 1TB drives in a Raid-1 configuration.When I first started this project they each had twin 160GB drives. In my original setup I had both nodes acting as primary systems so that I could mount /dev/drbd0 to my /data directory and see changes immediately.It had worked in the past where I could make a file in /data on the first machine and it would show up in the /data directory on the second machine. One day this had stopped working where if I made a file on the first machine it would display on the second one until I unmounted /data and remounted it to the /dev/drbd0 disk.
This is when I bought the new disks and decided to start from scratch. The weird thing is that if I make a file on the primary and remount on the secondary to see it and then delete it from the secondary and THEN delete it on the primary, the primary throws no error however it goes into read-only mode because it knows that file was already gone.Below is my configuration file, sda8 is an 820GB partition which is used for all of the data I want to replicate, currently populated with ~10GB of data. Sda7 is my metadisk partition which is 500MB large clearly more than needed by drbd.Also you will notice "incon-degr-cmd "halt -f";" is commented out. This is because when I go to actually use it drbd throws an error when reloading the configuration and I'm not sure why that is either
resource r0 {
protocol C;
#incon-degr-cmd "halt -f";
[code]....
View 3 Replies
View Related
Feb 4, 2010
I have CentOS 5.4 installed with lighty and MySQL installed via yum. not a problem. The issue become when I'm having problem with the current mysql that I installed via yum which I believe its currently at version 5.1.42-2. So I'd like to upgrade it to the latest available version of mysql. Except I can't figure out whether to download the generic glibc32 version or just get the RHEL5 version or find the mysql enterprise version somewhere. So, not knowing what I'm doing, I downloaded the RHEL5 version since it's closer to CentOS 5.4. Except for whatever reason the mysqli is not installed or configured properly and I'm not sure how to fix it.
Any suggestion? Everything was working nicely when I used yum to install, except the problem with the version of mysql that's offered in the repository. So I'd like to request a suggestion on how to either somehow upgrade mysql using yum and there's a different repository that I didn't know, or perhaps download a proper latest and greatest mysql, install and have it configured so that mysqli work properly.
View 6 Replies
View Related
Oct 28, 2010
I updated my system to the latest version - 5.5. After that I could not install VirtualBox. I was thinking, trying to fix, googling... it over for hours... Finally I found the reason. VirtualBox installer searches for the source kernel at /lib/modules/2.6.18-194.17.4.el5/build, and it can not. Look into /lib/modules, I have some kernels such as:
- 2.6.18-194.17.4.el5
- 2.6.18-194.17.4.el5debug
- 2.6.18-194.17.4.el5xen
... and more old ones.
At that time, I booted on 2.6.18-194.17.4.el5 kernel. But inside that directory, there is no build or source (directory/ file). Then I looked into 2.6.18-194.17.4.el5debug, and it had. So I typed: ln -s /lib/modules/2.6.18-194.17.4.el5debug/build /lib/modules/2.6.18-194.17.4.el5/build
View 12 Replies
View Related
May 4, 2010
I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there
Code: zend_extension=/etc/php5/ZendOptimizer.so.Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server.
View 3 Replies
View Related
Mar 2, 2010
I have installed Zend studio for Eclipse using a .bin file and now I want to uninstall this software. I found the directory where it is installed....the directory structure is given below:
Quote:
-rw-rw-r-- 1 root root 44691 2010-02-22 20:35 InstallScript.iap_xml
-rw-rw-r-- 1 root root 3226 2010-02-22 20:46 installvariables.properties
-rw-rw-r-- 1 root root 1532010 2010-02-22 20:35 uninstaller.jar
-rwxr-xr-x 1 root root 48033 2010-02-22 20:35 Uninstall_Zend_Studio_for_Eclipse_-_6.0.1
-rwxrwxr-x 1 root root 3511 2010-02-22 20:35 Uninstall_Zend_Studio_for_Eclipse_-_6.0.1.lax
Now I want to know how to use these files to uninstall the software?
View 1 Replies
View Related
Sep 23, 2009
I am running CentOS release 5.3 (Final)
kernel: CentOS (2.6.18-53.1.13.el5)
After updating to the version: CentOS (2.6.18-164.el5), the server is not stable and i have got a lot of this kind error:
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372068 in dir #5148223
Sep 19 02:08:36 server kernel: Aborting journal on device sda8.
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372071 in dir #5148223[code].....
View 8 Replies
View Related
Sep 14, 2010
When I select package updater for update software it gives an error I am attached my system information & error file.
Error message:-
file /usr/share/emacs/site-lisp/psvn.el from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/de/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/es/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386 .....
View 3 Replies
View Related
Jan 9, 2011
I am new to Linux. I installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP. During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost. I removed all "zend-server" like stuff from "Add Remove Software" screen. Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php) via terminal. Apache installed correctly and started workeing again ok on localhost. Then again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".
I shut down my pc thinking everything is ok now. Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me balloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore. I remember one thing that during reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
View 11 Replies
View Related
Oct 4, 2010
I'm a PHP developer trying to switch from Windows to Linux. So I'm new with Linux. I tried to google for a solution and tried the suggested wiki FAQ but with no success.I wanted to install zend-server-ce-php-5.3 today with yum. This worked okay.After this I tried to install php-5.3-extra-extensions-zend-server. This seemed to work.
View 3 Replies
View Related
Jul 21, 2011
After trying to upgrade to PHP53u on Centos 5.6 using the instruction here: [url], I've run into trouble.
I have 3 issues that I have identified so far:
1) After the upgrade I go this message:
2) This message when trying to access the site: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
3) Cannot access my Parallels panel on port 8443.
View 1 Replies
View Related
Aug 17, 2010
I am trying to run yum update on my CentOS 5.3 server, 32-bit, but it responds with the following:
Quote:Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
memcached is needed by (installed) memcached-selinux-1.2.8-1.el5.i386
Complete (1, [u'Please report this error in [URL]...
View 1 Replies
View Related
