Ubuntu Servers :: Updated Packages Now Php/mysql Is Not Working

Oct 31, 2010

Code:
PHP Deprecated: Comments starting with '#' are deprecated in /etc/php5/apache2/conf.d/mcrypt.ini on line 1 in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib

[Code]....

I have checked for directories and the file it is looking for does not seem to exist. the only file in that folder is pdo.so

View 3 Replies


ADVERTISEMENT

Ubuntu Servers :: 10.04 - Post Login Message Says "133 Packages Can Be Updated" - Not?

May 5, 2010

With: Code: sudo apt-get clean ; sudo apt-get update ; sudo apt-get upgrade I get:

[Code]...

View 6 Replies View Related

Ubuntu Servers :: Webserver Is Working - Configure MySQL?

May 7, 2010

So in my first ever attempt at Linux (and servers) I was able to set up a working web server that is visible from outside my network and created a simple PHP page thanks to this tutorial. I installed MySQL and have some experience with MS SQL but have no clue how to get started setting up databases and writing procedures in MySQL. I know all the syntax about writing scripts for MySQL (assuming it's the same as SQL) but I don't know how to get started. Do I need to be on the web server or can I do it remotely? Is there a front end GUI that everyone uses?

View 1 Replies View Related

Ubuntu :: When Will Bacula Packages Be Updated?

Jul 16, 2010

I'm building a new backup server, migrating from Centos to Ubuntu 10.04 LTS and upgrading to Bacula 5 all at the same time.Is there a way to find out why there's a 3 month lag? 5.0.2 was released in April, and the currently available packages are 5.0.1.Also how can I find the policy on future updates ? I'd really like to use the core-provided packages but don't want to end up way behind after a year or two.

View 3 Replies View Related

Ubuntu :: Apt-get Upgrade 29 Packages Can Be Updated?

May 10, 2011

Just did apt-get update then apt-get upgrade then apt-get install linux-generic linux-headers-generic linux-image-generic fdutils linux-doc linux-tools Now at: Linux 2.6.32-31-generic on an x86_64. But upon console login after rebooting into the new kernal:

[Code]...

Why would Ubuntu insist there are so many updates available when neither apt-get nor synaptic seem to find anything to upgrade???

View 2 Replies View Related

Ubuntu :: Use Apt-get Or Aptitude To Tell Me What Updated Packages Are Available

May 25, 2011

How do I use apt-get or aptitude to tell me what updated packages are available for my system? I'm moving over from Gentoo where I had a cron job that would run a command whose output was a list of available updates. I had this and other system related info emailed to me. I'd like to duplicate that under Ubuntu, but I can't find a way get the available updates.

View 2 Replies View Related

Slackware :: Keep 3rd Party Packages Updated?

Feb 27, 2011

I am using SBOpkg, but for the ~30 3rd party packages I have most of the slackbuilds are already out of date, and I don't expect they will be updated when security issues or whatever arise.

So is the only solution to subscribe to the individual mailing list for each piece of software, or is there a more automatic way?

View 5 Replies View Related

Ubuntu Installation :: Packages Marked As Updated Actually Not Installed

May 8, 2011

I did a clean install of 11.04 this morning. Upon logging in, Update Manager appeared, telling me there were 67 packages to upgrade. I obliged, and the update progress window appeared, as usual. At this point I realized it was not a convenient time to install the updates. No progress had yet been made; Update Manager had not downloaded anything, the progress bar had not moved, and the status was "waiting". I canceled the update and closed Update manager. However, upon running it again, it thinks that it successfully installed all the packages. In the "Ubuntu Software Center" Update history, it shows all those packages as having been updated with a timestamp of when I canceled the update. Apt-get and aptitude will not update the packages either. It seems like the packages have been marked as updated even though no update was installed. How can I rectify this problem and get the package managers to actually install the updates?

View 7 Replies View Related

Fedora :: Old Fc12 Packages Still On Updated Machine?

Jul 15, 2010

I did my update back when F13 was first out. A lot of the F12 packages are still on the machine. Should I be concerned. My latest thing was dealing with the Kmod-Nvidia packages left behind from F12. Someone suggested removing them and once I did my updater did its job perfectly.

So, the question is do I need to remove all the F12 packages or should I wait until there is another conflict? Secondly, if I should remove them, is it a search and destroy mission or can I simply nuke them all in one grouping?

View 3 Replies View Related

General :: Where Does All Updated Packages Get Saved In Computer

May 25, 2011

where does all the updated packages get saved in my computer in which I have installed Ubuntu 9.10? its really hard to download all those large files in slower Internet connection and the backups are unknown.please help me if i can save those downloaded packages in other devices.

View 4 Replies View Related

Slackware :: Updated The Packages Installed Via Sbopkg?

Jul 18, 2011

I am really enjoying recently slackware. Using slackpkg and sbopkg it is so easy to keep slackware running current. Sometimes I feel like a master of Linux, which is absolutely no true. Apart of some objectives I have regarding slackware's philosophy, I have this question please. I have about 8 packages installed via sbopkg. my question.

1)Is there a way to keep these packages updated via a program? (If not I guess I am obliged to check manually for each of them.) 2) Also, sometimes when we build a package via sbopkg it is necessary to build other packages. Is there an option to install via sbopkg and the package and its dependencies required through just one command?

View 8 Replies View Related

Fedora :: No Sound After Update - Updated Packages Are Listed?

May 10, 2010

I updated the following packages:

[Code]...

Before going to sleep I just closed my laptop without shutting down, but the next morning when I unlocked I had no sound. Does anybody see something suspicious in the updated packages?

View 1 Replies View Related

Slackware :: Download And Install The Individual Updated Packages?

Jan 19, 2011

If this is correct, how do you know if there updates available?

Do you need to down load and install the individual updated packages?

Sorry for this but I think that I am confused, or worse, not.

View 14 Replies View Related

Ubuntu Servers :: Mysql Error Stopping MySQL Database Server Mysqld?

Jun 17, 2010

I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this

* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.

So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.

View 1 Replies View Related

Ubuntu Servers :: Mysql ERROR 1045 \ Trying To Allow Remote Access To Mysql?

Jan 14, 2011

i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :

Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing

[code]....

View 4 Replies View Related

General :: Updated LibX11 And Python Packages Fail To Update In RHEL5?

Nov 10, 2010

I was assigned to do all the RHEL5 updates. All installed fine including the new kernel except for the updated libX11 and python packages. Does anyone have any suggestions relating to a fix for this?

View 3 Replies View Related

Fedora Installation :: Update Media's Repo Information To Reflect Some Of Updated Packages

May 13, 2011

I am creating custom install media using the Fedora Core 14 DVD as a base and I have gathered all of the packages and their dependencies I require using the yumdownloader command.I made sure to download the @core group along with the ones listed above. The problem I'm running into is that I don't know how to update the media's repo information to reflect some of the updated packages I have downloaded. So when I go to install on the device, it's saying it can't read/open a certain package and you can see that it's looking for an older version because I'm guessing its repo is telling anaconda that this is the specific version to look for. I'm looking for a way to "update" the repo found on the installation media.

View 1 Replies View Related

General :: View List Of Updated Packages After Apt-upgrade On Debian-based Systems?

May 15, 2010

I just did an update on my Debian system and it was very long. I'd like to know now, after the upgrades have already been applied, which packages were upgraded and which were not.

View 2 Replies View Related

Ubuntu Servers :: 8.04 LTS - How To Get Updated Version Of PHP

Dec 3, 2010

How can I get an updated version of PHP on Ubunut8.04LTS? I think the version that is on it by default is php5.2.1 - I need to use 5.2.10 at least for a web based application I use. Is there a way to tell Ubuntu to use this version - I don't what to go to 10.04LTS as that has php5.3 I think. If I manually install php 5.2.10 it might get messy and will Ubuntu damage it when I run an apt-get update?

View 1 Replies View Related

OpenSUSE :: Updated 10.3 To 11.4, Mysql Error Failed To Alter Database Error: 1102?

May 17, 2011

I upgraded a system from 10.3 to 11.4 and I get the following error when trying to run mysql:

Will update MySQL now, if you encounter any problems, please read following file:
/usr/share/doc/packages/mysql-community-server/README.SuSE
Log files inconsistency, please merge following files manually:
/var/lib/mysql/mysqld.log
/var/log/mysqld.log

How can I correct this? Mysql will not start so I can not run any of the utilities.

View 2 Replies View Related

Ubuntu :: Updated To 10.04 - PHPMyAdmin Not Working

May 8, 2010

I have a typical lamp setup. I updated to 10.04 and I can't seem to access phpmyadmin now. Apache and mysql seem to be working fine. I have tried restarting them both and have reinstalled phpmyadmin. When I say not working, I mean I try to navigate to [URL] and get page not found.

View 5 Replies View Related

Ubuntu Servers :: Date And Time Not Updated On 8.10?

Aug 31, 2010

On my virtual machine ubuntu 8.10, the date and time settings are not updated every time when I restart the machine.

View 2 Replies View Related

Debian :: Find Some "last Updated" Info For Packages, Changlelogs

Feb 4, 2010

I'm wondering if there's a way to verify the integrity of installed packages/programs against official repos. I did an update via synaptic about a week ago and it asked me to upgrade several packages such as login, su, passwd, groupadd, useradd, lastlog, and several others. Right away I was concerned about this, but I figured it's via synaptic, must be safe. Well now it's a week later and I'm trying to find some "last updated" info for these packages, changlelogs, whatever, to verify that they were indeed official releases/updates, and I'm coming up empty.

Is there something I can do to verify that these files and my system are still intact?

View 4 Replies View Related

Ubuntu Servers :: 'Zend Optimizer Not Installed' After I Updated To 10.04

May 4, 2010

I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there

Code: zend_extension=/etc/php5/ZendOptimizer.so.Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server.

View 3 Replies View Related

Server :: Upgrade Server With All Updated Packages And Patches?

Jun 27, 2011

Currently our Production Server version is Fedora8. I know its very old version, i was newly joined as server admin for this company.. my first task need to Upgrade Server with all updated packages and patches..Without production time down..because we have nearly 400 clients accessing our server.

1. Is it possible to do Without Production loss??

2. before upgrade what are the things i need to do??

3. is there any possibles the working function not working in new upgrade packages??

View 6 Replies View Related

Ubuntu Installation :: Upgrade Apache/SSL/Mysql/PHP And Mimic Existing Packages?

Aug 6, 2011

The Payment Card Institute (PCI) is requiring our site to upgrade to the latest versions of Apache, Mysql, OpenSSL, and PHP to fix known bugs that can compromise securityI can build all these from source, but when I do "make install" they don't mimic at all what is installed (directory format, files, etc) when I do apt-get install (of whatever old versions are in the dist).How can I find out how the packages are build via configure/make so that I can replicate the files, directory structure, etc, just with the current versions.

View 9 Replies View Related

OpenSUSE :: Vuze Updated And Is Not Working Correctly?

Aug 9, 2010

Vuze downloaded an update, and now everytime I use it keeps telling me to re start for the update to have an effect. When I re start, same thing happens again tells me it needs to restart. I'm using Gnome and openSUSE 11.3. I checked older posts for a solution it seems this has happened before. Do I just wait for a new version to come out of the repos?

View 1 Replies View Related

CentOS 5 :: Get Centos To Recognize Updated Packages?

Jun 24, 2009

I have a copy of the DVD Iso for centos 5.3. I downloaded the updated packages to the Centos directory and then ran the repomanage perl script to remove the old files from the directory. I then ran the createrepo and the new iso image with the script code below.

baseDir=`pwd`
rhelBuild=`pwd`/dvd-iso-contents
rm -f CentOS_1.0.0.iso
echo "Updating repository"
dvd_discinfo=`head -1 $rhelBuild/.discinfo`
echo "$dvd_discinfo

[Code]...

I am using VMWare to test the build, so I have the cd pointing to the iso image. I get the CentOS to start up find and dandy asking the questions for the interactive boot. It gets thru the stage of checking dependencies and then when it starts to copy down the image to the "harddrive" that is when the problem occurs.

One of the updated files is file-4.17-15.el5_3.1.i386.rpm (file-4.17-15.el5.i386.rpm was removed using repomanage), but the loader is looking for the removed file. I've looked thru any dependencies, but nothing specific for the removed file, all are asking for /usr/bin/file with no specific version numbers. I have run a rpm -test on all the rpms, but haven't been able to look thru that to see if there is a specific request for the version.

I did try this, but it just moved on to the next file. I did not replace the file version, but then it found another problem that was the same as this, the updated file is in the repo, but it is requesting the old version. I looked thru the fileslist and others to see if maybe that was the problem, but they were updated to the new versions.

View 1 Replies View Related

Fedora Servers :: Mysql At Boot Time In 10 / Get Mysql To Start At Boot?

Jul 28, 2009

I am trying to get mysql to start at boot without any success.

The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:

Starting mysqld daemon with databases from /data/mysql [ OK ]
Starting cups: [ OK ]
STOPPING server from pid file /var/run/mysqld/mysqld.pid
starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho
sts/denyhosts.cfg
090727 04:35:47 mysqld ended

The same init script works fine in Ubuntu.

View 2 Replies View Related

Fedora Servers :: Apache Updated - Reporting 2.2.0 On Any Error Page

Sep 1, 2009

But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved