Ubuntu Networking :: Installed 9.10, Updated, Now Internet Won't Work
Jan 30, 2010
All my other systems work fine, tried setting mtu to 1492. Everything is set manually in network connections. Tried deleting and making a new connection. I set the dns servers in the /etc/resolve (don't remember the exact path.) I can ping servers fine. This was a fresh install of 9.10. Again, the internet worked fine until I installed the updates from the update manager.I had internet problems when I first started using ubuntu a couple years ago.
View 1 Replies
ADVERTISEMENT
May 27, 2010
Ubuntu jaunty 9.04 and i installed it to my toshiba l450-02n and i updated the updates. one thing is the wireless does not work.
View 9 Replies
View Related
Mar 25, 2010
Well it seems like every 5 min the update manager is barging in telling me to update so I did last night and then this morning I turn on my computer and a window pops up that says "wicd needs your password" or something to that effect so I put it in. Then I notice wicd is not running. So I click on it in the menu and it pops up in awn for a second then disappears. As I have said before I am fairly new to linux so Im having trouble figuring this out. I don't know any commands i should run or where to start even. My computer is not much use to me without the internet so I would really like to get this fixed.
View 2 Replies
View Related
Jul 17, 2010
I used the "Upgrade" option the last couple of nights to go from 8.04 LTS and was going to go to latest version. Well got the upgrade done last night on 9.10 and now Broadcom gigabit wired connect will not connect to internet. Can ping router just fine. Just cannot get outside of it. Shows as configuredin ifconfig. But the name of it under the network manager is odd. Its ifupdown (eth0) (default) and maps to ent1.
View 1 Replies
View Related
Dec 30, 2010
I recently updated my ubuntu to the newest version 10. I have a DSL router with a password. When I try to connect to the net it will try to connect for about 5 or so min then say that I am disconnected. I cannot remember what option I had before to connect but its not on this version.
View 4 Replies
View Related
Jan 4, 2011
I've just installed Windows &, but now my internet doesn't work. How is that possible?
View 2 Replies
View Related
Nov 2, 2010
I've just installed Ubuntu 10 as a last resort to save my laptop from the bin. However, I'm having similar issues to when I installed 9.x a few months back. First off, I have no network connection at all (using another laptop just now). I've plugged in the network cable from the modem and although it looks to be doing something, it doesn't establish a connection. The wireless is also not connected due to Firmware not installed. I remeber this was a common issue with the Broadcom 43xx modem but I need to get the wired network going first to be able to download drivers *I think*.
View 1 Replies
View Related
May 4, 2010
I've just updated from 9.10 to 10.04. Everything seems to run fine except for zend optimizer which is throwing "Zend Optimizer not installed" error. I went to php.ini and the following line is still there
Code: zend_extension=/etc/php5/ZendOptimizer.so.Also I checked that the file does exist and that the php.ini I am looking at is in fact the php.ini file that is being used by the server.
View 3 Replies
View Related
May 8, 2011
I did a clean install of 11.04 this morning. Upon logging in, Update Manager appeared, telling me there were 67 packages to upgrade. I obliged, and the update progress window appeared, as usual. At this point I realized it was not a convenient time to install the updates. No progress had yet been made; Update Manager had not downloaded anything, the progress bar had not moved, and the status was "waiting". I canceled the update and closed Update manager. However, upon running it again, it thinks that it successfully installed all the packages. In the "Ubuntu Software Center" Update history, it shows all those packages as having been updated with a timestamp of when I canceled the update. Apt-get and aptitude will not update the packages either. It seems like the packages have been marked as updated even though no update was installed. How can I rectify this problem and get the package managers to actually install the updates?
View 7 Replies
View Related
May 13, 2010
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies
View Related
Oct 26, 2010
I have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....
View 9 Replies
View Related
May 22, 2011
I installed Ubuntu 11.04 on my mom's Inspiron 1521 and before I had it on there I had a older version of ubuntu which worked fine and could connect to the Internet, but since my mother isn't that well educated in computers and wants a simple to use UI, Ubuntu came into mind.
Well after installing ubuntu for a hour or two and trying to configure the drivers to allow Internet access with out a USB adapter using the BCM4311 I tried everything such as following the pretty basic tutorials online on installing the drivers with no luck. I check the additional drivers application and it's telling me the drivers are installed properly and are okay. ... Well, why am I not able to find a list of wifi connections yet?
I did the update command and updated every package on the machine. I reinstalled the kernal drivers for the BCM4311. I even installed the installer for the kernal device and nothing seems to be working.
View 4 Replies
View Related
Jul 23, 2011
I have an ibm think pad and for some reason the internet(firefox) stop working and i don't know why , the netwprl settings have disappeared or anything on fixing it , yes i have tried restarting the modem but that hasn't work ethier Also i don't really know where the re-start disk so is there anyway i can fix it with out the disk?
View 4 Replies
View Related
Mar 2, 2011
I updated (I have already been using 10.10 for some time now....) my desktop last night before I went to bed and I installed the updates that I was prompted about yesterday. Well today it says all the updates were installed and asks me to restart - i do.
1st thing I notice is my username/login was different - it used to just be <name>; and now it is <name>-x2512xt5125532 (not exactly, but it was changed..) My password is still the same and logged in fine.
I open up firefox and i notice I have no internet connection (I am wired..) - The back of my desktop light is on (so it definitely has connection) but ubuntu says it is disconnected. I tried deleting the current wired-setting and still not working.
I am using VoIP so I unplugged it from the back of my phone, and directly wired it to my computer - still no internet. I know I have a connection because my phones are working - just not THIS desktop. I have another desktop with 10.10 and the same updates (except the problematic one is 32bit, and the other is 64bit).
View 2 Replies
View Related
Jul 18, 2011
I am really enjoying recently slackware. Using slackpkg and sbopkg it is so easy to keep slackware running current. Sometimes I feel like a master of Linux, which is absolutely no true. Apart of some objectives I have regarding slackware's philosophy, I have this question please. I have about 8 packages installed via sbopkg. my question.
1)Is there a way to keep these packages updated via a program? (If not I guess I am obliged to check manually for each of them.) 2) Also, sometimes when we build a package via sbopkg it is necessary to build other packages. Is there an option to install via sbopkg and the package and its dependencies required through just one command?
View 8 Replies
View Related
Apr 14, 2010
I have installed a wireless card in my Ubuntu 9.04 System. When I start Firefox, it keep searching for a while and it cannot connect to the internet. I have attached screen shots of network connections. When I type the address of the router in the browser address window, it cannot access the router.
View 2 Replies
View Related
Jun 30, 2011
I am trying to get an internet connection on my newly-installed ubuntu computer.
i have tried <sudo apt-get install b43-fwcutter>. it responded <E: Unable to locate package b43-fwcutter>.
i then tried a <dmesg | grep -i firm>.
the it spat back at me.
[ 0.161805][Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.245165] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
[ 17.328521] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[ 18.302783] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[Code]....
i read the instructions, but no downloads. and fast, too; caus if i don't set up my friends computer by sunday i dont get $50.
View 9 Replies
View Related
Jun 1, 2011
Updated to the latest version several weeks back. Everything loaded fine and system works fine.....except for the internet (wireless AND wired).
I'm still real new at Linux so I just stopped and switched back over to Windows (dual-boot) out of frustration. Figured I'd finally tackle my problem today. Internet and everything worked perfectly before upgrade and now......NOTHING. I hooked laptop (computer running Linux) up to hard line on main computer.....still no internet.
View 6 Replies
View Related
May 26, 2011
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies
View Related
Apr 1, 2011
I installed 10.04 onto an old dell and its was running great, internet etc.. I then had my home desktop crash and said great, let me bring the dell home so the wife can use it. At home, i have a wireless card ( Netgear WG311 ) that I then installed into the Dell. Being that she was needing to use it online right away, I searched for the first install as it was not detected, and used used synaptic to install the bcmwl-kernal-source as that was the prefer ed driver for Netgear. So now that I installed that, not only have I not fixed the wireless issue, I now have no wired internet. I've been searching and re reading as many steps as I can, but am running out of time as she needs the computer tomorrow. Installed the ndwrapper ? but was not able to actually get the driver installed. All the other threads seem to be older ubuntu versions, and maybe its just me but the slight variation from one to the nex has me a little confuzed.
mike@mike-desktop:~$ sudo lshw -c network
*-network:0 UNCLAIMED
description: Ethernet controller
product: 88w8335 [Libertas] 802.11b/g Wireless
[code]....
View 4 Replies
View Related
Feb 23, 2010
I bought a netbook and couldn't handle windows xp at all, so installed ubuntu 9.10, but the wireless network icon doesn't appear on the top of the screen like it should, presumably because ubuntu doesn't automatically recognize whatever card is in there. This is an asus 1001-HA. could anyone assist me with getting this thing up and running on a wireless network?
View 9 Replies
View Related
Jul 12, 2010
Will 11.2 be updateable through yast to 11.3?
I have to get this workstation out onto shop floor, back into service, wondering if I put 11.2 in now then update to 11.3 while in service. It has 10.3 in it now.
View 5 Replies
View Related
Aug 10, 2010
I havent used Linux in a long time. I dug up an old copy of Suse (version8.2), and installed it on an old 599MHZ PC. Ive been trying to update the various libraries to be able to get a updated version of Firefox installed. Is there any chance that this can work? I need to know if Im wasting my time and should just put winxp on this PC. Also, I cant get any repositories working. I assume the default ones I have on the Suse installation are bad and the ones for the later versions will not work.
View 9 Replies
View Related
Feb 2, 2010
I have been searching through these forums the past couple of day as I have just installed Ubuntu 9.10 64bit on my custom whitebox. I have had windows 7 on it in the past, but want something different now.
I guess my main question is if anyone knows a simple to install wireless card (pci or usb) for ubuntu 9.10 64. I currently have the Netgear WG311V3 PCI card installed, but I can not for the life of me get it to work under Ubuntu. I have tried numerous different methods from search google, these posts, etc. but I can not get any of them to work.
View 2 Replies
View Related
May 6, 2010
When I click on the network connection sign at the top of the screen on Xubuntu (even on Ubuntu--I uninstalled it to see if that was the problem but the problem persisted on Xubuntu), it will say wireless network 'device not ready'. i tried running a command from the Xubuntu Troubleshooting and it said that my device was turned off for some reason. This is not true as I made sure that I turned it on. I've tried everything else and I am all out of luck. I also do not have a boot-up CD for Xubuntu/Ubuntu and I'm not sure of how to do all those commands in the terminal
.
About my network card...
Hardware details:
Board: Dell Wireless 1490 Dual Band WLAN Mini-Card Rev 5.8
Chipset: BCM4312/BCM2050
I forgot to mention at the bottom that it won't let me look at my hardware drivers and it says I don't have the correct things properly installed and then it won't show any drivers (so this problem probably cannot be solved using ndiswrapper).
View 1 Replies
View Related
Sep 16, 2010
It seems like ubuntu can't find mye wireless network card. I have ubuntu 10.04when I type ifconfig the output is this
eth0 Link encap: Ethernet HWaddr 20:cf:30:01:9d:d2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]....
View 8 Replies
View Related
Apr 24, 2011
I just updated my computer, 64 bit Lucid. Now my V7 mouse wont work. I know V7 is some Microsoft subsidiary, but my alternate Microsoft mouse works just fine. WTH? I have 4 of these computers in a Lab and I want them all to match. Plus, my keyboard is V7, so I'm getting paranoid that I might start getting keyboard errors.So my mouse was fine, I updated some recent updates, and now my old mouse wont work. What should I do?
View 1 Replies
View Related
Jun 21, 2010
I recently installed Ubuntu 10.04 and it appears to be working fine except for one problem: the internet access does not work at all. It is supposed to connect through a wired LAN and can talk to the router but when it comes to opening a webpage or pinging a server it doesn't work. Firefox says that it can't connect and the ping does nothing.
The computer can connect fine when booting Windows XP, but on Ubuntu it can't. Here are some details about the two OSes:
XP: Connects to network and internet
Ubuntu: Connects to network but can't mount the 'Windows Network' folder which is the only thing in the Network directory. Can't connect to internet.
I'm on a Dell Dimension 2400.
View 5 Replies
View Related
Aug 8, 2010
I've just installed Ubuntu 10.04 on a Dell Inspirion 1501 and I can't get the internet to work. I've tried configuring a DSL connection from System> Preferences> Network Connections and It doesn't recognize the password. On Windows it works just fine.
View 3 Replies
View Related
Oct 23, 2010
I have installed Ubuntu on an other computer using a Ubuntu 9.10 cd and I can connect to the internet perfectly. Now that I upgraded to Ubuntu 10.10, the internet won't work. I can see the connection but doesn't seem to be able to connect to it.
I remember having a similar problem with Ubuntu 9.10 on an different computer but I never found a fix to it. I tried searching for fixes to similar problems but none of them seemed to work.
View 5 Replies
View Related
