Errors were encountered while processing:
I've tried removing it from /usr/bin...tried deleting every vestige of samba on my system. Even when I attempted to sudu apt-get remove samba, the same error showed up.
How to completely removing samba so that I do not have those annoying error messages every update?
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View RelatedWhen I run from the command line, I get this output:
Traceback (most recent call last):
File "/usr/sbin/system-config-samba", line 45, in <module>
mainWindow.MainWindow(debug_flag)
File "/usr/share/system-config-samba/mainWindow.py", line 82, in __init__
[code]....
I have removed and re-installed and get the same crash.
Since my last system update yeasterday afternoon mplayer returns an error. Another system which I have yet to run the update on is still fine. Both systems are Ubuntu 10.04 Lucid Lynx.
The error is:
Code:
mplayer: relocation error: mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference.
I switched from Ubuntu to Fedora and I'm having a little bit of trouble understanding why I cannot update my system. Fedora seems to be a little bit more complicated than Ubuntu to update and to do other things... I'm still willing to try it because it has a good reputation and good reviews so I will go ahead and give it a shot but before I do that I need to update it. I have an HP pavilion notebook dv2000. Just installed Fedora 15 and my system is telling me that I have over 700 updates! when I click on install updates I get an error:
Transaction error An unspecified transaction error has occurred. More information is available on the detailed report. Then on the details this is what I get:
[Code]....
Network-manager-gnome caused an error during system update.Quote:network-manager-gnome: Depends: network-manager (>=0.8.99 but 0.8.4~git.20110319t175609.d14809b-0ubuntu3 is to be installedHow can I update network-manager?
View 1 Replies View RelatedCode:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
I cant update my system what can I do?
I've upgraded from FC11 to FC12 32-bit (live CD to HD install). Now when I try to perform software updates it gives me an Internal System Error. I've clicked on more details and it gives me the following:
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
Everything else seems to work, including all of the programs I've installed from non-Fedora sources i.e. DOSEmu, Adobe Flash plug-in and Cannon LBP-660 printer driver.
I just installed F9 and updated to F11 (fedora 11) and I updated the system because I couldn't get the media player working and then I installed all these packages for two days. I have tried yum clear cache and the rpm update. Here are some of the ones I tried:
rm -f /var/lib/rpm/__db*
yum update PackageKit
; yum clean all;
And this is the error:
Error Type: <type 'exceptions.TypeError'>
Error Value: 'NoneType' object is unsubscriptable
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 2280, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 2277, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.5/site-packages/packagekit/backend.py, line 600, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.5/site-packages/packagekit/backend.py, line 508, in dispatch_command self.get_updates(filters)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1743, in get_updates self._check_init()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1965, in _check_init self.yumbase.repos.doSetup()
File : /usr/lib/python2.5/site-packages/yum/repos.py, line 71, in doSetup self.ayum.plugins.run('postreposetup&apos
File : /usr/lib/python2.5/site-packages/yum/plugins.py, line 178, in run func(conduitcls(self, self.base, conf, **kwargs))
File : /usr/lib/yum-plugins/rpm-warm-cache.py, line 32, in postreposetup_hook
cmd = commands[0]
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies View RelatedI cant update my fedora its give me this error "Internal system erro has eccurred"
Code:
When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies View RelatedI had installed Centos 5.4 , then upgraded to 5.5 hoping that new version has samba 3.5.x. However the updated Centos 64-bit 5.5 also has Samba 3.0.33-3.28.el5.
How can I update samba at least to Samba 3.0.37 ? The reason is, there seems to be security concerns on samba website, and I wish, at least update to latest 3.0.x .
i have ubuntu 7.10 installed in a vmware workstation virtual machine. My problem is that i cannot update it.
Error message that i get is The repository might be no longer available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and the correct writing of the repository address in the preferences
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
Fedora 15 software update "unspecified transaction error occurred" at system info before installing updated list. After unchecking every (no arch) update, all the rest (i686) were installed. now all (no arch)updates remain on the list to be installed.
View 1 Replies View RelatedI just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies View RelatedI upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
I have a problem in updating opensuse 11.4, when I try to update the system the progress stops in the update window, and no updates appear
View 9 Replies View RelatedI am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View Related(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
Yesterday i have installed F14 and then went to the comand line to update the system via yum update. It was about 860MB of updates in 430 packages. The strange thing is that only one package was a delta rpm and all other were normal rpm. Is Fedora giving up on presto or it needs some special configuration?
View 1 Replies View RelatedOn two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba
Code:
[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)
[code]...
All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.
I have had a good look round the forums but cannot come up with anything quite like this and the problem prevents me from using my NAS box and stuff is starting to stack up on my main PC now...
I have a Dell desktop running Ubuntu 9.04, a Shuttle running Mythbuntu 9.10 and a Netgear ReadyNAS Duo, all of which worked fine until this problem started. I have done nothing to any config files nor have I modified any settings from the outset, as far as I can remember I have just used everything as it came. This problem probably started a month or so back when update manager suggested a Samba update on both PC's which I accepted. I don't fire up my NAS box more than once or twice a month to back all my photos, music, video etc. so it was a while before I did (following the update) I could see the NAS and the Shuttle from the Dell but couldn't browse them I just got the error message 'Unable to mount location. Failed to retrieve share list from server' which I gather is all too common. I have searched around a bit on these forums and have tried a few things in the command line to gather information and I found something that worried me rather a lot. From Dell:
Code:
geoff@geoff-dell:~$ findsmb
*=DMB
+=LMB
IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION
[Code]...
I haven't done any updates on the NAS box firmware so it can't be that and now I don't even see the shares in filemanager. What on earth is going on??? I know there are many other threads similar to this but but I am hoping that the slight difference might make this more obvious to solve. I forgot to mention that now I don't even see the shares in filedmanager - another thing that happened all by itself!
For the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
Code:could not add package update for poppler-data-0.4.0-1.fc12(noarch)updates: poppler-data-0.4.0-1.fc12.noarch.
View 3 Replies View RelatedI've been running a F10 based Samba Server a few months without trouble. Now, after an update, samba is not working any more. When I try to start it manually, it reports the following error:
[root@hawkeye ~]# /etc/rc.d/init.d/smb start
Starting SMB services: /bin/bash: line 1: 3403 Aborted (core dumped) smbd -D [FAILED]
[root@hawkeye ~]#
I've re/installed all samba packages and configure the smb server again from scratch but the problem was not solved. My samba packages are:
[root@hawkeye samba]# rpm -q --all | grep samba
samba-winbind-3.2.8-0.27.fc10.i386
samba-client-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
[Code]....
After the update, the smb daemon will not start:
jarfx:/etc/init.d # ./smb start
Starting Samba SMB daemon [2011/03/12 09:04:08, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/03/12 09:04:08, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/03/12 09:04:08.069212, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070086, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070189, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb
Followed this [URL] And all was fine. yesterday, I notced I had not updated things for awhile. Now I just get the windows network icon, and nothing within.
View 4 Replies View Related