I have a problem, I have a script which need to be ran in a screen, automaticly at startup (SRCDS Spesificly).
What I've done:
Ive placed a boot.sh script in init.d: Code: sh /home/xinity/eXtremeServer/startup.sh startup.sh: Code: cd /home/xinity/eXtremeServer
screen -S Sandbox ./orangebox/StartServer.sh Code: cd /home/xinity/eXtremeServer/orangebox/
[Code].....
What is wrong/happens: The server will run, I can connect to it, and see its process in top (running as root though). But it will not appear in the screen -ls list. And I cannot attach to it, therefor I have no way to manage my screen/server.
Is there any other way to execute scripts at startup? I remember when I ran Ubuntu Desktop, I managed to run it by the program Startup Manager. There has to be an nongui way to do this?
I just upgraded to the 10.04 and everything works just fine as before (except for skype but that really doesn't matters as it has already been 3 years I'm using ubuntu and I managed to get it to work only once, for miracle I believe ^^). The only real issue I have is this: when I start up my laptop, after the log-in, no sound will be heared as the "speaker" volume level in alsamixer is set to 0; if I raise it from the terminal running alsamixer (as I don't know any other alternative) everything plays just fine, but the next time I boot I do have to do it all over again... So, how can I change the default startup level of the "speaker" in alsamixer?
PS: by the way I do have the very same issue with the screen luminosity but the other way round as is always starts at maximum brightness and I can't manage to get it to start at the minimum, as it did before. At least reducing the backlight if far more quick but a couple of times I forget it and the battery lasted something like half an hour
I've recently installed the 64bit version of WUBI on ASUS K50IJ with windows 7. Everything went smooth however when I try to boot into ubuntu, it shows that all the drivers are loading, I can even see the desktop background image for a second and then the screen goes blank. It is still ON however nothing is showing on it. Pressing "CTRL+ALT+DEL" reboot the system.
even get access to the console for further debugging?
I've been using 10.04 for a while now with no problems but for some reason it started freezing on the splash screen, 2 of my keyboards lights start blinking and thats it, I've tried with recovery mode and no luck either. The thing is I don't remember doing anything wrong.
I recently switched from KDE to Gnome, and when i setup Kubuntu I checked "Do not require login at startup", so i didnt get the screen. When i switched to gnome, it still didnt show it, and for various reasons i want the login screen at startup. I am running Ubuntu 10.10.
I recently upgraded to Ubuntu 11.04, and I installed it via the Update Manager and restarted as normal. But, as I went on my dual boot OS selection screen and selected Ubuntu, this message appeared:
init: udevtrigger main process ( 398 ) terminated with status 1 init: udevtrigger post-stop process (404) terminated with status 1 init: udevmonitor main process (397) killed by TERM signal The disk drive for / is not yet ready or is not present Continue to wait; or Press S to skip mounting or M for manual
i recently was trying to install the ubuntu 10.04 in a machine with a 2x xeon processor but i'm getting some errors.In the installation first (and second, third...) try, the splash screen just freeze.After a lot of tries, just when i actived the acpi=off, noapic and nolapic, i finaly mounted the virtual desktop but after the succesful installation the machine wont boot! Only thing i get is a blank screen with a blinking dot on the left top.? it probaly somenthing related to the things i actived in grub boot, but i'm new to linux and can't find the problem! i can acess the ubuntu via hdd. I edited the boot on grub menu removing the "quite splash" from it and added "nolapic" in there place.Only thing left was the OS are now too slow. He works fine for 5 seconds and completely freeze for 2 seconds, then work for 5 secs again.
I have Ubuntu 9.10 and I want to replace the splash screen with the white Ubuntu logo and the marquee progress bar with that of Xubuntu with those whirling sparkles.
I've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz) 512MB RAM 40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
Recently my laptop running Ubuntu 10.10 has had an abrupt power shutoff (actually several times -- my battery has some problems).
Now when Ubuntu boots, I get the startup screen, but after a few seconds, the screen goes black. I can still boot from the live CD and in fact I am using my computer from the CD to write this post.
A few more details: When I press the power button while my computer is in this "blank" state, I get hard drive activity. Also, if I press "power", and then "enter", the machine actually shuts down.power
I have ubuntu desktop 10.10. I wrote a simple script that I want to execute at system startup. The only problem I have (and one that I've been struggling with for the better part of the day) is that I don't see the outputs of the script during startup.
I'm a beginner with Linux. I'm using the version of Ubuntu 10.10 installed in a notebook HP Pavilion tx 2000 (Turion 64 x2). My Ubuntu is 32 bits.
I'm passing for the following situation:
When I turn on my notebook, if it is running on battery (even with the battery has 100% of charge), a login / password screen does not appear, and the screen goes dark and nothing more I can do (that I knew!). So I re-start the machine.
However, if the notebook is plugged into electrical energy (with or without battery), a login / password appears normally.
If, with the notebook plugged into electrical energy, I log in Ubuntu operating system, then great. After loaded the operating system, I can turn off electrical energy and the notebook works normally (only with battery). In other words, just the login screen that is with this electrical energy problem.
I did a fresh install of 11.04 a week ago and I had my screen saver set to run 'Floating Feet' after 15 minutes idle time. Twice I've left my computer, and returned, clicked the mouse, and found my computer frozen on the screen saver. I was able to recover once by hitting the power button, which brought up the shut down/restart options and normal desktop. It hasn't happened since I turned off the screen saver, so I'll just leave it that way until a solution arises.
I recently started using Ubuntu 11.04. Everything works fine with my monitor directly connected to the computer. I get a default screen resoluton of 1680 x 1050, which is just fine.
However, when I connect the screen through a video splitter to be able to use a beamer, the screen resolution defaults to 1024x768. Moreover, Ubuntu then detects an unknown monitor and I cannot select a higher resolution.
I searched for modifications of xrandr en xorg.conf but I have to admit I don't understand what I've read. So my question remains: how can I force Ubuntu 11.04 to start with a screen resololution of 1680 x 1050 (without first connecting monitor only, that is).
I hereby add some information I retrieved with the screen connected without the splitter, so you can see what hardware is involved.
Code: dirk@LaboFysica:~$ xrandr Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192 VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0
I am running linuxmint . Trying to configure my start-up resolutions using the Startup Manager. But they only offer 4:3 resolutions. (My screen is a widescreen, 1600 by 900). So I could check the 1600 x 1200 option but that is not the correct resolution. And I get a reminder from my screen that the resolution is wrong.
I installed ubuntu via virtualbox one day for fun, just to test it out. I didn't really need it, so i deleted the partition it was on and resized my hard drive. Thing is, when i startup my computer, ubuntu is still listed as an operating system, but whenever i go to choose it, my computer says "this file is missing or corrupt." I was just wondering if i make it so Ubuntu is not even shown on the screen anymore.
and I've had Ubuntu Linux (10.10) for maybe a month and a half now. Im very satisfied with the whole system, no problems up until an update about maybe 2 weeks ago from today (rough estimate). Anyways, when I start my computer and choose to start Ubuntu, about half of the time it will load with some weird new login screen (because of update), and their are other times where the screen will go blank. I dont think its very safe to cut the power from the computer through the power button :/ I realize there are other posts regarding this, and I apologize if this is against the rules, I just thought maybe it would be appropriate to start a thread with this problem for 10.10 users
Firstly, what's the best way to execute commands on startup, cron? Can I use su in a shell script to switch between different users, if so how?
How do I create several detached screen sessions on startup? screen -A -m -d -S test ./script.sh seems like it should work but using it in a script started by cron doesn't show any screen sessions running after booting.
It looks like the screen session is closed after the command finishes executing, can I keep it open so I can see the output?
For some time now (actually, since I migrated to KUbuntu) the fonts at "log in" / "start up" are way to small to read.After start up / log in every thing is normal. Normal or proprietary drives makes no difference
Current setup:
Kubuntu 9.10 64 bits Ati Video card Monitor: Sony LCD screen (a TV)
i am succesfully installed TeamSpeak 3 server and now i want to startup it automatically without screen daemon and on every startup on linux ubuntu 9.10 i am using this command for start the TS3 server:./ts3server_linux_amd64 dbplugin=ts3db_mysqlin home/user/Desktop/ts3server_linux_amd64
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
I have a Toshiba Laptop Satellite L355-S7905 Intel Celeron Processor 585 @ 2.16 Ghz, Mobile Intel GL40 Express Chipset. 4GB of Memory, 160 GB HD. Tri-boot: Windows 7, Unbutu 10.04 and Fedora 12.
Here is what happened: I had a hard/forced shutdown while using Ubuntu 10.04. Some warning text flashed on the screen before it went blank and I could not read it. Now when I turn on my laptop it freezes on the Toshiba set up screen. I can not go to the F2 setup, I can not go to the F12 boot seqence and I can not use F8 safe mode. Also the ESC button had no effect.
I have tried turning it on with the Win 7 cd in the drive but nothing. The same when I put my Ubuntu 10.04 cd in the drive, nothing. My guess is that the forced shutdown messed up the bootfile/grub order. The harddrive runs for a few seconds then stops. Should I attack the problem from a Windows view point or a Ubuntu view point?
After updating ubuntu 10.04 a few days back, I get a black screen at startup without a flashing cursor or anything. I'm kind of new to ubuntu but not completely.
System specs: Processor: q6600 Graphicscard: xfx nvidia gforce 9800gtx+ Motherboard:asus p5ql pro 2 HD's 320gb and 250gb
I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
I just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
I have Ubuntu 10.04 LTS installed on my HP Compaq Presario CQ60. Unfortunately the screen is busted & I'm using an external LCD. It boots directly onto the LCD, but the resolution is 800x600 by default, the only other option is 640x480. I'm assuming its using the VESA drivers for the graphics. I've managed to temporarily fix the resolution to 1024x768 by running the following in terminal for every session:
[code]...
I've added a document to /etc/init.d so that it may be loaded on startup, but it does not seem to work.
