Ubuntu :: Forced Shutdown, Now Freezing On Startup Screen?
Sep 9, 2010
I have a Toshiba Laptop Satellite L355-S7905 Intel Celeron Processor 585 @ 2.16 Ghz, Mobile Intel GL40 Express Chipset. 4GB of Memory, 160 GB HD. Tri-boot: Windows 7, Unbutu 10.04 and Fedora 12.
Here is what happened: I had a hard/forced shutdown while using Ubuntu 10.04. Some warning text flashed on the screen before it went blank and I could not read it. Now when I turn on my laptop it freezes on the Toshiba set up screen. I can not go to the F2 setup, I can not go to the F12 boot seqence and I can not use F8 safe mode. Also the ESC button had no effect.
I have tried turning it on with the Win 7 cd in the drive but nothing. The same when I put my Ubuntu 10.04 cd in the drive, nothing. My guess is that the forced shutdown messed up the bootfile/grub order. The harddrive runs for a few seconds then stops. Should I attack the problem from a Windows view point or a Ubuntu view point?
View 8 Replies
ADVERTISEMENT
Sep 1, 2010
Background you can skip: I have an old Dell laptop, an Inspiron 2650, which I use primarily as an internet terminal at home. I have switched back and forth between XP and different Ubuntu releases, and Lubuntu is what I am running with now. At some point I upgraded and the hardware support for my laptop broke. I have done multiple clean installs, and using any 10.04 Ubuntu distribution I have to disable ACPI in the Grub settings, or else my mouse and kb will not work. So...
Question: Since the OS shutdown feature can't turn off the laptop power with ACPI disabled, I often hit the laptop power button and skip the shutdown process entirely. Most of the time I am only running Chrome, so I am not worried about losing or corrupting local data. Is there any valid reason why this would be a problem? Does the shutdown process do anything important enough to justify the hassle?
View 7 Replies
View Related
Mar 30, 2011
I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.
One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.
I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.
After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.
After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:
Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)
Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint
The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.
I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.
The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)
Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy
Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!
View 9 Replies
View Related
May 23, 2011
unclean shutdowns/reboots. Whenever I boot/restart, I notice the message "/dev/hdb1 (and hdb2) was not cleanly unmounted, check forced." Then fsck(?) scans them without errors, and everything continues normally. FWIW, hdb1 @ hdb2 are ext2, /boot & /tmp respectively, whereas all other partitions are ext3. Could that (ext2) be why? I checked halt, reboot, umountfs, umountnfs.sh, and umountroot in /etc/init.d, and nothing jumped out at me, though I'm not exactly sure what I'm looking at/for.
View 8 Replies
View Related
Jul 21, 2011
I've just installed F15 KDE Edition, and as the title tells, I need to keep pressing F2 and/or Enter to make the system go through the boot up process, otherwise it freezes as long as i keep it without my interference !! and then it takes relatively long time to start the GUI, and when I switch to the console (using ALT + CTRL + F3 for example) and try to write the login or the password, there seem to be some 'bouncing' effect, that if I'm to write the login 'root', I get something like 'rrooott' ... however, this doesn't happen in the GUI .....
I have a multiboot system, with Windows7 and Linux Mint (based on ubuntu 10.4) installed along side. While Windows7 doesn't have any problem with my hardware, Linux mint has also some issues that cause the performance of media players to degrade (sound and video tearing) and cause repeated freezes to some applications (a game actually, 'wesnoth') until I press a key or move the mouse.
I have AMD Athlon 7750 dual core 2.7 GHz system, with 3GB DDR2 800 Ram, and embedded ATI Radeon HD 3200 with about 512 shared memory.
one more thing, when I booted off the live image to run the install program, I booted into the video failsafe mode (not sure of the exact name, but I think you got it, no mode setting) and passed the option 'noapic', so I suppose this options are still passed whenever I boot mysystem, as I get the text version of the progress bar during startup, rather then the graphical fedora logo ( i.e no mode setting) ..
View 3 Replies
View Related
Jan 6, 2010
Ok, this just started happening with ubuntu 9.10.
When it first happened, I didnt know what to do so i accessed all my data, backed it up in a diff partition, reformated my drives and reinstalled a clean 9.10. But now, every now and then (i think its when i use frostwire and have other programs running) my ubuntu keeps freezing up, it becomes non-responsive to anything i do, so i have to do a hard shutdown, after which, when i reboot, it is not able to mount /home, so i run FSCK and it fixes it, but ive done this about 3 times now, its starting to get a bit annoying, i dont know if anyone else has this problem, or if its a known bug. Here are my specs:
Running: Ubuntu Karmic 9.10 64 bit
3 Sata HDD: 1 TB, 750 GB, 350 GB
4GB Ram
2 Nvidia 7900GS
with a Pentium core 2 duo @ 3.0GHz
View 5 Replies
View Related
Nov 5, 2010
Two or three times on a daily basis it just freezes and I do not know why. For example, I am doing some minor coding, surfing the web and just some regular stuff and suddenly, out of nowhere, it just freezes. I cannot force reboot, cannot shutdown, cannot run, cannot enter terminal, nothing. Totally helpless. Only physical reboot do the work. Never had this issue before.
View 9 Replies
View Related
Aug 24, 2010
I am getting frustrated and at my wits end. I went away from home for 3 days and came back to a frozen computer. To start, my linux computer was locked and wouldn't allow me to switch to my other computer using my KVM. All I saw was the default wallpaper with no icons, cursor or anything. Rebooting the computer allowed me to resume normal operation on the other but not on my linux comp.Now when I boot I can only get to a recovery console if luck is on my side and trying a normal boot freezes the computer with a blank screen and blinking cursor.
I tried editing the GRUB commands with "nomodeset", "i915.modeset=0" and "i915.modeset=1" with no luck. I also tried removing "quiet" and "splash" from the boot and it freezes at random parts of the boot. Sometimes with an error loading a device with IRQ 21 and sometimes on a memory address. I am running XP on the same computer, so I thought I would try to boot into that, even THAT freezes!I have even tried running my LiveCD and it tells me there is an error reading the boot CD...the same CD I installed with 3 weeks ago without any problem! As I type this, the computer is booting, sort of, to a black screen with a ridiculously large "X" cursor and a small white dot in the upper left.System Specs:Athlon 32004gb RAMGeForce 7200generic DVDgeneric sound
View 1 Replies
View Related
Aug 7, 2011
I'm using Ubuntu 10.04. My computer (IBM Thinkpad R40) is freezing whenever I turn it on. Once it gets to the login, the mouse and keys don't work. I don't know if this is an Ubuntu problem or a problem with my laptop. Does anyone know how to fix this? Do I need to upgrade my RAM (I have half a gig RAM; I have a lot on my laptop, so maybe I need to make it a full gig?).
View 2 Replies
View Related
May 30, 2010
If I have compiz on, it causes my system to freeze sometimes at startup. I've turned compiz off, but I miss the effects. Is there a setting somewhere I could change to prevent the freezing at startup. We have a computer with an nvidia card with compiz enabled, and this doesn't freeze. Graphics Card: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (From lscpi) Ubuntu Release: 10.04
View 2 Replies
View Related
Mar 25, 2010
i had a previous post regarding startup issues with sshkey generation here [URL]... now im stuck at the part after that where the starting sendmail line is, im starting to think that my ram is going to pieces on me because windows 7 and ram hungry games like mass effect ran just fine on the same machine 3 weeks ago... i ran a memory test off an ubuntu live 9.10 cd and it passed so idk whats going on here i've tried two distros and both strike out and i get stuck at startup and never even see that purdy gnome desktop.
View 1 Replies
View Related
Feb 12, 2010
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies
View Related
Nov 12, 2010
Running Lucid 10.04 in place of XP on my old Packard Bell Imedia has been good apart from the random freeze-ups that often prevent booting or stall the shutdown process. Today I think I solved it!? It appears that my wireless PCI adapter (ZyXel G-302 v3) was causing the problem. Ubuntu had installed a default driver which seemed to work OK; but I thought I'd try installing the Windows XP driver from my original ZyXel install disk as an experiment. I used ndiswrapper, got the XP driver installed and my freeze-ups have gone (touch wood).
View 3 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Mar 24, 2011
I am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
View 3 Replies
View Related
Jun 9, 2010
I'm trying (& failing) to write a script in /etc/init.d that only operates on boot up but NOT on shutdown. The program I want to run does not accept any parameters. This works
Code:
#!/bin/bash
test -f /var/www/html/moveit || exit 0
. /var/www/html/moveit
exit 0
but on shutdown and startup.
This doesn't
Code:
#!/bin/bash
test -f /var/www/html/moveit || exit 0
case "$1"
start)
. /var/www/html/moveit
;; top)
;; *)
esac
exit 0
either at startup or shutdown.
View 8 Replies
View Related
May 13, 2010
I have the new Ubuntu 10.04, installed through Wubi. It was fine for ages, graphics working fine and sound. Then it asked me to seemingly install my graphics card drivers. I did so, rebooted and not the loading screen is stretched at the wrong ratio and doesn't get past displaying 5 red dots. How can I get it working?
View 3 Replies
View Related
Jan 1, 2011
parts of my screen keep freezing and locking in place so that nothing new can be seen in that section, it happens when i click a menu or close a window, the part that freezes only goes away after i log out and then back in
View 2 Replies
View Related
Jan 21, 2011
Diagnosis: I'm running Ubuntun 10.04. It has been running smoothly for pleny of time (8~9 months). I've done the clean install (not upgrading).
One day I left the screen locked and when I returned it was frozen. I restarted and it froze in the login screen (sometimes when I restart it actually log in my account, but freezes right after some minutes). The mouse pointer still moves.
I still can log in remotely through SSH, even though the system is frozen. So I suspect it has to do with the GUI.
Here's the output of my /var/log/Xorg.0.log
I think the error started in here:
Code:
(WW) Jan 21 11:29:46 NVIDIA(0): WAIT
(2, 6, 0x8000, 0x00007b6c, 0x0000aa04)
[Code]....
View 4 Replies
View Related
Feb 10, 2010
Just curious if it is possible to schedule a complete system shutdown and start up?
My box with ubuntu server on it is only used as an ssh/proxy server, so I would like save on energy costs and add a layer of security by completely shutting it down during the hours I do not use it.
View 5 Replies
View Related
Mar 4, 2011
i have a RAMdisk set up on my desktop with a hidden folder of stuff in it; but i want to know is it possible for me to set ubuntu to copy the files to another directory on shutdown, and copy back again on startup?
View 2 Replies
View Related
May 2, 2011
The startup and shutdown displays are a series of vertical black and white lines, and the text displayed on them appears as more or less white blobs. Otherwise, the displays when 11.04 is running are fine, but this startup looks so naff it would be nice to change it so that the diplays can be read. I would hate to demonstrate Ubuntu to someone and have to explain such a display.
View 7 Replies
View Related
Oct 22, 2010
Firefox 3.6.11, Chromium 6, Google Chrome 7, they all crash or freeze on me and I can't figure out what is going on. I'm on a fresh/clean install of 10.10 with all updates installed. I've tried reviewing all the logs in /var/logs/ but didn't find anything unusual although I might have missed something. I'm using the proprietary nVidia driver for my video card (GeForce FX 5500 - 173.x drivers) so I'm not sure if that may have something to do with it or that it may be my NIC card? I've gone to the NIC card manufacturers website (Realtek) for updated drivers, but the site says the drivers are built in to the kernel and there is no download available. It seems as though the only time it crashes or the screen freezes (sometimes with the lights blinking on my keyboard) is when I'm browsing the internet.
View 7 Replies
View Related
Jun 21, 2010
I'm preparing a vitualization server (host) with VirtualBox. This machine, running Debian, is intended to run in HeadLess mode, without GUI.
I've got some guests VMs running. But I was wondering about the best way to start this guests VMs on startup and shut them down kindly when host is shutdwon.
Virtual Machines run under non-root user. I was thinking about making a script in /etc/init.d/ in order to start certain VMs and to stop every VM running when system is halted. Is this really the simplest and most secure approach?
Actually I couldn't find very much on this subject in user manual or googlin' around.
View 3 Replies
View Related
May 19, 2011
This bug is strange because it doesn't happen for me in Ubuntu (Gnome). Whenever I try to watch a Flash video in full screen, the picture always freezes after a few seconds of play, and the only way for me to unfreeze it is to get out of full screen using the escape key. I can put it back into full screen, but it always just freezes up again after a few seconds.
I figured out a strange work around for it though, but it's certainly not ideal. I figured out that if I get the time pop-up (see attachment to see what I mean) to stay up, it doesn't freeze. This happens in both Firefox and Chrome. I was going to try this in Rekonq, but I can't seem to get Flash working in Rekonq.
View 9 Replies
View Related
Jun 17, 2011
I've recently upgraded to 11.04.Till now, I could select an option to make the open folders on shutdown, to restore on startup.There was an option to restore running applications
View 5 Replies
View Related
Jul 8, 2010
My screen has started freezing periodically. The mouse still moves the cursor but nothing else responds. Ctrl-Alt -F1 doesn't give me a terminal screen nor does Ctrl-Alt-Backspace restart X I must turn off the computer and turn it on again to reboot. I don't remember having this problem with Fedora 11, but I recently moved to Fedora 12. I am using the kernel
2.6.32.14-127.fc12.i686.PAE
Looking at /var/log/messages,
I find repeated instances of the error message
[drm:radeon_ib_schedule] *ERROR* radeon: couldn't schedule IB(4).
before the reboot.
Google provides many references going back to April for this string, mostly on Ubuntu related sites. I do have an 128 MB ATI Radeon X300 graphics card but it is over four years old, and I didn't have this problem with earlier versions of Fedora. Also, the google references seem to refer to hibernation, which I am not doing, at least not intentionally. Finally, I see that Xorg configuration has changed significantly since I last checked. (I can't find xorg.conf.) Can anyone refer me to a relatively succinct description of how it now works?
View 6 Replies
View Related
Jan 24, 2011
on startup/shutdown i get following message "vbox guest (something) failed
what does that mean ?
opensuse 11.3 gnome
View 3 Replies
View Related
Apr 8, 2011
Running Opensuse 11.4 (but had same problem on 11.3). During startup and shutdown, the text messages are displayed using a very large font (characters are > 1 cm high). How can I specify the font and font size it uses ? Presumably it is doing a bad job of detecting the monitor (its a Samsung SyncMaster P2250). Which config file contains a suitable entry, and what is the entry ?
View 6 Replies
View Related
Jan 16, 2010
For the last month, when starting up or shutting down my laptop under Linux, I would get graphical corruption. Startup has an colour inverted, grainy rendition of what should be displayed while shutdown has a red background with all the text replaced by grey rectangles.
At the very least this affects Fedora, Ubuntu and Xubuntu. Windows is not affected. Outside of startup/shutdown the system is fine.
View 2 Replies
View Related
