Ubuntu :: OpenOffice Modules After LibreOffice Installation
Dec 7, 2010
I installed Libreoffice on my Ubuntu 10.10 (through wubi), and uninstalled Openoffice afterwards. Everything's ok. But then I continue to receive updates for openoffice modules (which are a lot btw). From the Software Center, currently installed are libreoffice modules together with (I think) their openoffice counterparts. Now the question is, is it safe to remove the openoffice modules? Or does Libreoffice need them, too? How do I remove them completely from the updates?
Using Karmic, want to "upgrade" OpenOffice 3.1 to LibreOffice 3.3.Should I uninstall OO 3.1 and install LO 3.3, or should I try to install over-top of existing OO 3.1?
I tried to install LibreOffice on the recommendation of my friend and it failed to install. Now I have neither LibreOffice or OpenOffice. I also cannot install OpenOffice from the Ubuntu software center. what can i do to have either one of these.
I noticed there were updates for everything related to OpenOffice today which reminded me, now that LibreOffice is the default, why keep OpenOffice?I removed OpenOffice and all its components.LibreOffice still runs unaffected, but now autoremove wants to uninstall LibreOffice as well.Is OpenOffice a dependency of LibreOffice? Should I reinstall OpenOffice?
I wanted to try LibreOffice out. I found a PPA for it, so I added the source, tried it out, didn't like it, and noticed that openoffice now won't work. Which isn't too big of a deal, but now I can't even get the software center to install it. It gives me some error that you can read in the screenshot. What can I do?
I found the stable repository for LibreOffice is ready. So, I want to change OpenOffice to LibreOffice on my system. I want to know if need to uninstall OpenOffice firstly and which packages of LibreOffice must be installed?
Has anyone tested the compatibility of LibreOffice with OpenOffice by reworking (using LibreOffice) a complicated document originally written in OpenOffice? Are there any problems switching from one to the other while working on a given project?
I am using LibreOffice 3.3.2 Final on a 10.10 Ubuntu Laptop.Everything I print from LibreOffice and Openoffice is printed ~2 cm too high. Printing from other programs as Document Viewer and GIMP is just fine. It's not a settings problem, Ive checked everything hundred times. I am printing on HP Deskjet connected to a wireless router with CUPS 1.4.4 Driver.
I have box that I run Sid on. I haven't used if for a month or so and have found that OpenOffice is gone and appears to have been replace by LibreOffice. I have come across one other thread which noted something similar. Is LibreOffice any better than OpenOffice? I plan to purge LibreOffice and install OpenOffice back on unless there is a good reason to keep LibreOffice.
As root, run this (as Rahul showed below, this is shortest command to do it):
Code: yum install @office Another way of doing this is: Code: yum groupinstall "Office/Productivity" Another way of doing this is: Code: yum install libreoffice-writer libreoffice-calc libreoffice-impress libreoffice-draw libreoffice-base
I Was attempting to install Openoffice on my system and i think at some point i messed something up while removing the Libreoffice. I no longer can access the Ubuntu software store as it says my package catalog needs to be repaired, when attempting to repair i get the following errors:
I have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem: - if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank). - if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great. - if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory os : debian 5 (folder lib/modules is empty)
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
If I'm using OpenOffice 3.1 and wish to use the/a PPA for the upgrade of OpenOffice 3.1 to LibreOffice 3.3; is there any solution using a PPA? Secondly, If not, is it possible to install (from the installer downloaded on the LibreOffice website) LibreOffice in the same location as OpenOffice is/was installed? (I think I'd be safest to uninstall OO before installing LO). In other words, where does LibreOffice install? The reason I ask is because I'd like to continue using BiBus Reference Manager and it has specific location requirements.
I think it's because I had the beta of LibreOffice first and then I upgraded to the final release (3.3). Now it just looks like MS Word 2003 running on Windows 98.
I might sound picky, but it looked better for me with the RC version.[URL]..
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
I'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
I have an nfs share that mounts automatically when kde starts.
Code:
wendy@DellNB:~$ cat .kde/Autostart/mountNAS.sh #!/bin/bash mount ~/TestShare #echo "NAS Mounted"
[code]...
Gimp works fine editing and saving photos from/to the nfs share. kWrite can do its thing and read/create files on the NAS. Files I create with vim are visible and editable under windows. OpenOffice however, when I try an open a file I get "file is locked by unknown user." I open as copy and try saving to the share with a different name... No Dice, error saving to share the file is created on the share but it is empty. I did some reading and found a post that said to comment a line from a file called soffice, which I cannot find.
I use Debian 5.0.6 32-bit through VMware workstation installed on my Windows Server 2003. I just simply installed it from CD-1 and I use Directadmin on that.
I need a lot of iptables commands for blocking but I keep getting missing module errors on that one, I did lsmod | grep -i iptables to see there are no modules. It should have been installed by the disc image but I don't know why it didn't. So I now want to know how to get those modules required by iptables.
I have noticed in the recent updates there is a Kernel update 2.6.32-22 but there is no restricted modules included. On my Desktop I have a Nvidia card which I installed the driver using the Hardware Drivers Application. As far as I know these Drivers are ether reinstalled or updated whenever there is a kernel update.
I also have a Laptop with a ATI Radeon card which I did run the updates and ended up (after the reboot) in low graphics mode, after a bit of work I was able to reinstall the drivers and get my desktop back so that's ok now.
I had this problem a few years ago with an old version of Ubuntu, kernel updates but no restricted drivers. The drivers turned up the next day and all was fine. I was just wandering if this is a known issue with Lucid or if anyone else has had this problem, It's been a couple of days since I noticed the Kernel update but still Restricted Modules. Oh I'm using Ubuntu Lucid 10.04
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I want to remotely install OpenSUSE on one of my servers. I followed the instructions given at SDB:Remote installation - openSUSE, but it didn't work. (My server reverted back to the already installed system.) I think this has to do with a special kernel module (megaraid_sas) that is necessary for the raid controller. Without this module, the kernel cannot find any disk. Of course, the module is not included in the initrd provided by OpenSUSE. I know how to add files to the initrd, but I have no idea where I have to put the required kernel module and which config file inside the initrd must be modified to make the kernel load the module.
