I successfully installed linux mint 9 and at the same time update the system. Now that everything is running, I returned the pc to the owner, but when I power it on, no display. You can see the post but no display after that. And 1 more, I press the shift while loading grub2, nope nothing happens. And also tried booting the CD installer, same results.
I installed the system using an old 15" CRT monitor and the owner had a AOC 1619sw LCD monitor. I found this thread from ubuntu which I think was the same problem as mine, [ubuntu] Help! No display/keyboard on boot with differnet monitor - Ubuntu Forums, but no solutions yet.
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
I'm having some strange problems with my monitor. It's an LG Flatron L1730S and the graphics card is a Nvidia Geforce 5600FX. The monitor is listed as unknown in monitor settings and is going at 51 HZ with performance and out of range issues in some game. How can I get ubuntu to recognise it, or better yet change the driver?I did some googling and discovered a tool called displayconfig-gtk, but I can't install it in Ubuntu 10.04
I have a Dell monitor attached to a Dell laptop. I am using Ubuntu 10.04 x64.
Spec: Latitude E6500 : Intel Core 2 Duo P8800(2.66GHz,1066MHz,3MB) Base Options : 256MB Nvidia Quadro NVS 160M Graphic Card 1 S Display : 15.4in Widescreen WUXGA (1920X1200) 2CCFL Dell 2001FP (attached using DVI)
When I try to boot into Ubuntu with the monitor attached I get a DVI: Cannot Display this Mode message on my monitor. I can boot into Ubuntu just fine if I detach the monitor. Have tried with VGA, but to no avail. I have the latest and greatest Nvidia drivers downloaded from the Nvidia web site. Googling indicates that this is a Dell problem, however, I am not sure about this. It worked just fine on my previous laptop (IBM T61) and Ubuntu 9.10, so I guess it has to do with the laptop and not Ubuntu 10.04.
I run Ubuntu on a MacBook Pro with an external monitor connected. But currently the external monitor only works with one user account. The External gets no signal and the laptop display is used on the login page. Is there any way of having the login page and possibly startup displayed on the external at all times for all accounts.
System > preferences > Display Doesn't work for me, I use NVIDIA X Server Settings
If I turn off the monitors, I get a black screen (the monitors goes to power save) when I turn them on again.
I have a workaround which involves pressing ctrl-alt and f3 and then ctrl-alt f7. That usually works and brings up the graphical login-screen. And I get my session back.
But sometimes when I log in, my session is gone. It is as if I was logged out or the system has rebooted.
I have a Visio TV that I dropped and cracked the LCD display in one corner, for watching TV it's basically useless now. On a whim I plugged it into one of my computers and about 75% of the screen is still usable. Only the bottom right hand corner of the screen is messed up. What I'd like to do if possible is to define an area of the screen. Say for instance the top left hand corner across and down to where the screen starts getting bad.
Like a left click and drag out the good area and then make only that area "the monitor" for the OS to use. I'd then probably build a case or something to house it in and only show the "live" area to clean things up. I'd like to use Ubuntu. But if you know I can't do it in Linux but can in Windows I'd consider that option as well. I just hate to junk the TV if I can use it some how as a monitor.
I'm running 10.04 as a DVR (mythtv). If the computer boots with the TV off it won't detect the settings, and when I turn the TV on nothing displays. I have to ssh into the computer and reboot it to get it to detect the display.Any idea how I can go about solving this? How can I disable autodetect and force it to use a specific setting?
Looking for a newb-type step by step process for configuring ubuntu to 1) recognize both the onboard video card as well as the PCI graphics card and 2) how to set up three displays with separate desktops (able to mouse-over from screen to screen). So far the 20+ hours searching online has yielded excessively complex instructions, inappropriate instructions, or ancient posts. Is this config even possible? Again, I am learning so the instructions need to be very deliberate. PNY GeForce FX 5200 PCI 256 MB 2 Port VGA + S-Video Graphics Card VCGFX522PEB and an onboard display apdapter (Intel P4 Chipset 845GV).
I have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
New machine with an ATI 5770, with a fresh install of Ubuntu 10.04 (lucid, 64-bit). What a mess! As reported elsewhere, the initial install sometimes came up with a black screen, or corrupted displays, different each time. After several retries, I had a display that was corrupted but barely readable. The installed Ubuntu booted, but also had a corrupted display, just barely readable. I was just able to make out the hint that I should use the proprietary drivers, so I booted into safe mode and enabled them. Afterward, the display came up correctly.
This is ok for me, as a long-time Ubuntu user. But it really is like a trip back to the bad-old-days of Linux: you really cannot expect anyone but a geek to get through this. And the is the LTS version of Ubuntu? I use two monitors, to provide a double-wide single desktop. When I log in, the second monitor displays random noise, and is entirely unusable. I have to use System-Preferences-Monitors to switch the second display off, then switch it back on, and then everything works fine.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
The problem is that when I select System -> Preferences -> Monitors, the monitor is shown as unknown and it only allows me to set 1280x1024 (shows 0Hz as display refresh rate) which is way too high for my brother. I was wondering if there's a way to select the proper monitor from a list so all display resolutions are shown and I can select a lower one for him.
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
After getting tired of squinting at my netbook screen (System 76 Starling) I bought a 21.5" Asus VE228H monitor. It works beautifully with the right resolution and aspect, EXCEPT that the driver Ubuntu is using is for a 22" monitor, and the image on the screen has about 1/8" missing all around. Sadly, this eliminates the menu bar at the top of the screen. Moving the image down doesn't help. Is there any way to shrink the image, or get Ubuntu to use a driver for a 20" or 21" monitor instead of 22"? I've been using computers since DOS command line days, but have been using Ubuntu only about 2 months.
All of a sudden today there was no display on my Ubuntu PC. It seems to be powering on - I get the LG screen when the monitor is switched on - but it goes into "Power Saving Mode". How do I diagnose this? I already unplugged and plugged. Monitor is connected to a graphics card - no change when I switched to VGA.
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
I setup 10.04 on an older Athlon XP 3000+ ASUS A7N8X board with a Radeon RV250 video card. It works fine and dual boots with XP on the LCD monitor I have. I took it to my mom's an connected to a iiyama Vision Master 450 CRT. When I boot, I get the grub menu, and if I pick Windows XP, it boots fine. If I pick Ubuntu, the screen goes blank, as small underline cursor appears at the top left, and then the monitor goes into sleep mode and the keyboard is no longer responsive.
I cannot seem to gain access. I cannot hit CTl-ALT-F2 (or ALT-F2) to get to text login (screen is sleeping and no keyboard control). I tried Live CD, it shows a graphic at the bottom of the screen and then goes blank as well! Seem like something with monitor resolution, but I cannot seem to figure out how to force it to work. I can't seem to figure out how to get into command line mode on boot either.
I have an Nvidia card and I am using ubuntu 10.04. Before installing the ubuntu nvidia restricted drivers, the boot screen with the ubuntu logo would cover the entire display area of the monitor. But now, after installing the Nvidia driver and fixing the display resolution of the boot screen with the Plymouth fix, the boot screen doesn't expand to fit the entirety of the monitor display area. How can I fix this? There is a good 2 inch off from either side of the display while booting.
I am using ATI HD3200 graphics card, and running Ubuntu 10.04 Lucid on a laptop. It have VGA port so I can attach external LCD monitor to the laptop. I am using fglrx driver.
My question is how should I configure the xorg.conf file so that when I attached external monitor, the GNOME menu bar (Applications, Places and System, etc) will be put on the external monitor instead of laptop LCD monitor.
I have checked varies web resource that saying you can drag and drop the GNOME menu bar to the new screen, it never worked. Someone also suggested to add new bar into the screen and GNOME will remember it, I can't even find the option to do that.
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
I was thinking to do my music producing completely on linux and found a plethora of good tools for it. The thing is I have two monitors and instead of launching manually every little app each time I feel creative, I want to make a script that launches all my favorite apps.
So long I have written this little bash script:
Code:
#!/bin/bash #Start my audio programs for music production (qjackctl --start)& (hydrogen --nosplash)& sleep 1 ardour2
So what it does is that it starts the jack server, then hydrogen and lastly ardour2. The thing is that I want hydrogen to start in the second monitor but don't know how. I have devilspie but I didn't have any luck on finding some command to choose display. I am aware of the --display flag that some programs have like firefox but hydrogen doesn't have it. Btw I use a different X server on each screen. is there a universal way to launch ANY kind of program on a specific display?
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
