Ubuntu :: 10.04 / ATI 5770: Dual Monitor - Corrupted Display
Aug 30, 2010
New machine with an ATI 5770, with a fresh install of Ubuntu 10.04 (lucid, 64-bit). What a mess! As reported elsewhere, the initial install sometimes came up with a black screen, or corrupted displays, different each time. After several retries, I had a display that was corrupted but barely readable. The installed Ubuntu booted, but also had a corrupted display, just barely readable. I was just able to make out the hint that I should use the proprietary drivers, so I booted into safe mode and enabled them. Afterward, the display came up correctly.
This is ok for me, as a long-time Ubuntu user. But it really is like a trip back to the bad-old-days of Linux: you really cannot expect anyone but a geek to get through this. And the is the LTS version of Ubuntu? I use two monitors, to provide a double-wide single desktop. When I log in, the second monitor displays random noise, and is entirely unusable. I have to use System-Preferences-Monitors to switch the second display off, then switch it back on, and then everything works fine.
View 5 Replies
ADVERTISEMENT
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
Jan 13, 2010
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies
View Related
May 23, 2011
setup amd64bit created a live DVD of the 11.4 64 bit burn pope inside went to install put selected the second option because putting it on a 60G vertex ocz super fast drive. used the entire drive for ubuntu. have mirror dual monitor installed the proprietary drivers from amd.go to Ubuntu software center type additional drives install and install the proprietary drivers from ati you should be able to figure that out then lauch the ati catalyst control and setup your 1 and 2 monitors so that they are correct.
ok now install Wine ubuntu software thingy tip wine don't do the beta right now im stuck on installing starcraft and mounting the other hard drives will get back to you and make a better guide on this.oh by the way if your Internet isn't connecting automatically you might need to set your IPV4 setting manually this is because you have set your router with DHCP disabled. Code needed for install:
nautilus $HOME
PLAY ON LINUX is working for SC2 Sois crashes though and during install sont font was missing neede to guesse correct button to install.
More useful code
To mount the drive ro (read only):Make a mount point.mount First open a terminal.Then type these commands (assuming the partition is /dev/hdb1):
Code:
sudo mkdir /mnt/music
sudo mount /dev/hdb1 /mnt/music -t ntfs
Note: if the partition is not /dev/hdb1 you will need to adjuxt accordingly.To make the mount automatic at boot you need to edit fstab:
Code:
sudo gedit /etc/fstab
Add this line:
Quote:
/dev/hdb1 /mnt/music ntfs auto,users,ro 0 0
Again, adjust your partition accordingly if needed. Copy and paste the contents of /etc/fstab (in your next post) and type in a terminal "sudo fdisk -l" (w/o quotes) and copy and paste the output.
[code]....
View 3 Replies
View Related
Jan 9, 2010
My display settings seem to have been corrupted after I upgraded from 9.04 to 9.10. I can only view my screen in 1280 x 1024 - no other resolutions work. Ubuntu is also not detecting my monitor, a Dell E193FP (19"). In reading some other posts, I see that the first question will be to post my xorg file, which follows.
View 1 Replies
View Related
Feb 1, 2011
Recently I am trying to install the latest Ubuntu / Xubuntu but after the kernel messages the display becomes corrupted. The machine is a Clevo laptop with the dreaded SIS 671 / 672 chipset. The Ubuntu 8.04 is working flawlessly. Any other version I get several problems and depending on the mood of the system I get a vertical running display ( not readable ) or a left horizontal displaced screen (readable) ...
I tried more tan several CDs ranging from 9.01 to 10.10 both Ubuntu or Xubuntu. What is the plainest (simpler ) VGA mode in order to install it? I have tried vga=normal and even VGA =3 with no success. With the latest Ubuntu 10.10 I get another problem it simply does not recognize the HDD / SSD. I have traced the SSD problem with the sata_sis module in kernel 2.6.35 and up... Other distros have the same problem ...
View 2 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Nov 8, 2010
I have a dual boot drive, one is WinXp the other Ubuntu 10.04. I don't know why, but my ubuntu partition became corrupted (booting from live cd and inputing fdisk -l in the terminal, shoes my partition as unknown type) My Grub was on this partition, and therefore I cannot boot neither one of my two OSs. I would like to recover my linux partition, I figure I can do that only from my WinXp partition, but I don't know where and how to install Grub.
Also, If anyone knows how I could recover from the live CD without booting Windows, please speak up, that would make everything much easier. Another thing, it would be just super if I could recover my whole partition, not just the data, because I would hate to reinstall all the stuff that I had on my Ubuntu.
View 1 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Nov 28, 2010
I have a PC with three partitions: C, D, E. The C: and D: partition are NTFS and C: has Windows XP on it. D: holds my data files and folders in the Windows environment. E: has CentOS version 5.x. The machine is dual bootable. When booting up Grub gave me the options to boot to CentOS (by default) or to boot into Win XP (by selecting it).
Recently I used Partition Magic to resize the D: partition. I shrank the D: partition. The freed space space was then used to create a new NTFS partition.
After the partitioning was completed, I rebooted the machine. But now Grub is having a problem. It does not display the list of of bootable OS options any more. Instead there is just a black screen with the prompt:
grub>
What am I supposed to do here?
I am afraid that after I ran Partition Magic somehow Grub is messed up. How do I recover the previous boot options? Or at the minimum, how do I make the the machine to boot into Windows XP?
View 7 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Dec 10, 2010
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Sep 20, 2010
I would like to use the VGA-Port for Beamer in "Mirror" Mode how to modify the xorg.conf? I am not familiar with linux configuration.
View 2 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
Apr 23, 2011
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies
View Related
Aug 7, 2010
I'm running dual boot with Vista and Ubuntu Lucid Lynx. for few days i was running Ubuntu only, downloaded some files and created some directories. few minutes ago, i switched to Vista to see something and i wanted to burn some of the files i downloaded using Ubuntu but couldn't find those folders.
i thought maybe its related to different file system or something so i switched back to Ubuntu and surprise! my folders are not there, instead i got a file, of unknown type with the same name as the folder had! in another folder case it's was an image (some print screen of my browser screen - Mozilla) and again with the name of what was the folder! first - what the hall had happened? second - can i recover my data somehow?
View 7 Replies
View Related
Jan 24, 2010
I'm COMPLETELY new to linux. I"m running Ubuntu 9.10 and TRYING to install Devede. I have tried the Terminal, Synaptic Manger, and the Add/Remove and still keep getting this same error. I'm running a regular 32 bit Pentium 3 process to test if I like Linux or not. this is what it says: E: /var/cache/apt/archives/libavcodec-extra-52_4%3a0.5+svn20090706-2ubuntu3_i386.deb: corrupted filesystem tarfile - corrupted package archive this is not a DUAL boot computer either.
View 8 Replies
View Related
Aug 10, 2010
I successfully installed linux mint 9 and at the same time update the system. Now that everything is running, I returned the pc to the owner, but when I power it on, no display. You can see the post but no display after that. And 1 more, I press the shift while loading grub2, nope nothing happens. And also tried booting the CD installer, same results.
I installed the system using an old 15" CRT monitor and the owner had a AOC 1619sw LCD monitor. I found this thread from ubuntu which I think was the same problem as mine, [ubuntu] Help! No display/keyboard on boot with differnet monitor - Ubuntu Forums, but no solutions yet.
View 4 Replies
View Related
Aug 16, 2010
A directory on my desktop has recently become inaccessible. The error message that is given when I attempt to open the directory is as follows: Could not display "nikki stuff", The file is of unknown type. I brought up a terminal and did an ls -l on the directory, which produced the following: -rwxrwxrwx 1 nikki nikki 314 2010-07-26 19:16 nikkis%20stuff.desktop Unfortunately, the computer is not mine, so I do not know much more about how this happened.
View 2 Replies
View Related
Jan 10, 2010
Can Ubuntu display to a sepporat monitor? If so what do I need to do?
View 4 Replies
View Related
Jul 7, 2010
I'm having some strange problems with my monitor. It's an LG Flatron L1730S and the graphics card is a Nvidia Geforce 5600FX. The monitor is listed as unknown in monitor settings and is going at 51 HZ with performance and out of range issues in some game. How can I get ubuntu to recognise it, or better yet change the driver?I did some googling and discovered a tool called displayconfig-gtk, but I can't install it in Ubuntu 10.04
View 4 Replies
View Related
May 4, 2010
I have a Dell monitor attached to a Dell laptop. I am using Ubuntu 10.04 x64.
Spec:
Latitude E6500 : Intel Core 2 Duo P8800(2.66GHz,1066MHz,3MB)
Base Options : 256MB Nvidia Quadro NVS 160M Graphic Card 1 S
Display : 15.4in Widescreen WUXGA (1920X1200) 2CCFL
Dell 2001FP (attached using DVI)
When I try to boot into Ubuntu with the monitor attached I get a DVI: Cannot Display this Mode message on my monitor. I can boot into Ubuntu just fine if I detach the monitor. Have tried with VGA, but to no avail. I have the latest and greatest Nvidia drivers downloaded from the Nvidia web site. Googling indicates that this is a Dell problem, however, I am not sure about this. It worked just fine on my previous laptop (IBM T61) and Ubuntu 9.10, so I guess it has to do with the laptop and not Ubuntu 10.04.
View 1 Replies
View Related
May 10, 2010
I run Ubuntu on a MacBook Pro with an external monitor connected. But currently the external monitor only works with one user account. The External gets no signal and the laptop display is used on the login page. Is there any way of having the login page and possibly startup displayed on the external at all times for all accounts.
System > preferences > Display Doesn't work for me, I use NVIDIA X Server Settings
View 1 Replies
View Related
Sep 13, 2010
If I turn off the monitors, I get a black screen (the monitors goes to power save) when I turn them on again.
I have a workaround which involves pressing ctrl-alt and f3 and then ctrl-alt f7. That usually works and brings up the graphical login-screen. And I get my session back.
But sometimes when I log in, my session is gone. It is as if I was logged out or the system has rebooted.
I have two monitors and Nvidia.
View 2 Replies
View Related
Sep 13, 2010
I have a Visio TV that I dropped and cracked the LCD display in one corner, for watching TV it's basically useless now. On a whim I plugged it into one of my computers and about 75% of the screen is still usable. Only the bottom right hand corner of the screen is messed up. What I'd like to do if possible is to define an area of the screen. Say for instance the top left hand corner across and down to where the screen starts getting bad.
Like a left click and drag out the good area and then make only that area "the monitor" for the OS to use. I'd then probably build a case or something to house it in and only show the "live" area to clean things up. I'd like to use Ubuntu. But if you know I can't do it in Linux but can in Windows I'd consider that option as well. I just hate to junk the TV if I can use it some how as a monitor.
View 1 Replies
View Related
