Ubuntu :: No Sound On HP G50 Laptop After Lucid Upgrade?
May 20, 2010
I upgraded to Lucid a week or two ago. Sound has worked fine, then suddenly, yesterday, I have no sound for any application. The Gnome sound applet shows the volume normally, and have the Mute All option greyed out (not selectable). Nothing stands out as wrong or unusual under sound preferences, and I didn't change anything, although I did recently install a set of updates. There is no physical mute button on this laptop. IT is not account-specific, there are no sound effects even before you log in.
As well, since the upgrade I have intermittently not had the networking icon in the notification area appear, it is covered over by a fragment of some other graphic. It is most usable with the Human these, it is completely unusable with any of the new themes. Anyone know a fix for either of these two issues, especially the first?
Finding Lucid extremely flaky, particularly the signature themes. I like some aspects of it, such as the fact the wireless button on my laptop works now, but overall, not an impressive effort - someone whose first introduction to Ubuntu is Lucid and sees that the notification area doesn't even work correctly is not likely to stick around.
View 4 Replies
ADVERTISEMENT
May 16, 2010
I had ubuntu 9.10, and every time i turned on my computer it would prompt me to upgrade, so finally i did. I let it upgrade over last night, then finished it this morning. when it went to restart, it turned off fine, but when it came back on, the screen goes through the Gateway first thing where it shows like F10 for boot from etc, and then the screen goes to a black command line looking screen, then it says ubuntu for a second, and then the screen goes black and does nothing. i let it sit for about an hour to see if it was just running slow, but it was still black when i checked it, so now my laptop is useless until i figure something out.
View 3 Replies
View Related
Jun 16, 2010
Once again, after upgrade - NO SOUND. Read all the various forum attempts at getting sound working. Tried them. Still doesn't work. Has been an ongoing problem after each release. Pulseausdio has been removed but still seems to be there somehow, as in, when running alsamixer, the following is output:
alsamixer
ALSA lib pulse.c:229pulse_connect) PulseAudio: Unable to connect: Connection refused
cannot open mixer: Connection refused
or, aplay -l, produces:
aplay: device_list:223: no soundcards found...
so, I guess that's the problem. But how do you get it to recognise the card? The only thing that has been done since upgrading was to remove pulseaudio which wasn't part of the prior install in anycase but somehow injected itself during the upgrade.
View 6 Replies
View Related
May 11, 2010
I upgraded successfully last night from Hardy Heron to Lucid Lynx, but have no sound now. After searching around I can see that this is a fairly common problem. But none of the proposed solutions that work for other people have yet worked for me.
If I type 'alsamixer' at the command line, everything looks fine. There are no 'MM's indicating something being muted. I tried removing and reinstalling alsamixer and pulseaudio with no success. Edited lines 45 and 46 of /etc/pulse/default.pa with no luck.
View 9 Replies
View Related
Mar 24, 2011
I used to listen music and watch films with my with my laptop but, after an upgrade (to 10.04 lucid) it is impossible to hear any sounds. The sound card is detected and it works since making the laptop boot from live CD (of ubuntu 10.10) I get sounds without problems. I tried to reinstall alsa-base and alsa-utils with no results. Everything looks OK, but the sound! (It's not muted!)
View 9 Replies
View Related
Jun 21, 2010
The title pretty much says it all, the sound on this system was working fine until I ran the upgrade to Lucid. I've tried everything in the standard troubleshooting guide, the sticky threads and plenty of forum searches but so far I've come up with nada. For some reason Ubuntu refuses to see my soundcard, no matter how much I twist and tweak it. It's an Asus M3A78 motherboard with an on-board Realtek ALC1200 chip (snd-hda-intel). Here's most of the relevant output, hopefully someone can easily spot what's going on because I'm getting snow-blind staring at the monitor. code...
View 4 Replies
View Related
Jul 15, 2010
So i upgraded to 10.04 a few months ago, right after it was released. clean install. it worked perfectly out of the box, or so it seemed. I had had sound problems in 9.10 that i didn't experience after i upgraded... until i tried to use some headphones a few days ago. when i connected the headphones, the speakers wouldn't mute. i thought it was no big deal. i had the same issue in 9.10 and it was fixed after i upgraded alsa. i figured i'd try the same thing. I used the same alsa upgrade script i used last time [URL] and it fixed the jack sensing and the sound worked perfectly... for about 5 minutes. after a short while of playing audio, sound would stop playing. i'd stop getting sound from video files, audio files, and even from my browser. i'd have to reboot to get sound again... only to lose it again in about 10 minutes. Now it's regressed to the point where i have no sound even after i reboot.
weird thing is, when i test out an audio file with aplay, it works... even if i just get garbage sound from some mp3 files.
anyway, i've got an HP dv7 and this is my aplay -l output
Code:
sleepee@sleepee-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
[Code].....
View 2 Replies
View Related
Jul 29, 2010
I can't get sound to work and am not sure how to trouble shoot. The sound DOES work when first booting, and I can make it play a test beep with the sound config app. But I cannot get sound from any other application. One possibly relevant fact is that I see a lot of I/O errors early in the boot process, but they flash by quickly so I cannot quote them.
View 1 Replies
View Related
May 16, 2010
Upgraded via Update Manager from 9.10 sound-previously-working-just-fine-system. Now, for example, running any audio-producing app (Rythmbox is a good example but its the same for anything including out of a VirtualBox XP install or with MythBuntu): The main volume control functions, but goes from muted to full volume in just 4 steps; raising it higher has no effect. It gets stranger: in Alsamixer or gnome-alsa-mixer I can see that lowering the desktop volume control to mute causes Master, PCM, Front, Surround, Center, LFE, and Side all to go to zero. Raising the desktop control one step causes all of these but Front to go to 100% instantly. Increasing the desktop control by a few more steps causes Front to step to 100%, after which no further volume increase is perceived. It's as if each step in the desktop volume equals some 25% of the Front setting, and 100% of the others. The audio setting in System, Preferences, Sound, Hardware is "Analog Stereo Output."
If I click 'Mute' on Master in the mixer then all the speakers mute, but unmuting Master does not unmute anything else. Only after I move and release the mouse-down state from the master volume do the other channels unmute. The volume control in Rythmbox, on the other hand, works seemingly correctly (maybe its going thru Pulseaudio?) And as an aside, why are there no controls for Pulse if it sits on top of ALSA?
I'm really confused by this, as all of it work as "expected" while running 9.10. Here is some output from this system (an ASUS M4A78T-E):
[Code]...
View 7 Replies
View Related
May 28, 2010
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
View 5 Replies
View Related
Dec 10, 2009
Everything was working when I was on Ubuntu 9.04 but after I upgraded to 9.10 via their upgrade utility. The upgrade failed at the last point of installation (when it tried to install daemon I think). Nevertheless, after the reboot I was on ubuntu 9.10. But the sound stopped working as well as the mouse trackpad on my laptop. I remember that during the installation when it asked if I wanted to keep the old sound configuration file, I clicked yes. So is there I way to fix/reinstall the sound driver and the tackpad? In the sound hardware setting window, no device is listed. I'm pretty sure that my hardwares work on ubuntu 9.10 as the sound and trackpad work fine using the ubuntu 9.10 live CD.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
May 4, 2010
How did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
View 9 Replies
View Related
May 2, 2010
All audio and sounds work just fine until I close my laptop's lid for a spell and reopen. On resume, there is simply no sound at all. It's all fixed when I restart, but being a laptop, I like being able to close the lid and come back to it every now and then.
I believe it's an issue from when Ubuntu changed their audio in the transition between Jaunty and Karmic, and it never got fixed. FYI, it worked just fine in Jaunty.
From past postings and research, it seems to be a lack of something 'waking up' or restarting when the lid opens. However, it's not 'alsa restart' or 'pulseaudio restart' or whatever. It's one little bug that keeps me from having sound without a restart.
View 1 Replies
View Related
May 30, 2010
I get 3-4 clicks every minute, until I realized the problem and installed "laptop-mode-tools". After that things are back to normal.Why isn't laptop-mode installed by default in Lucid? This is a simple work-around which should be imposed by default, so users' hard discs won't be damaged.
View 1 Replies
View Related
May 2, 2010
I've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies
View Related
May 10, 2010
Laptop only has external display. When karmic boots 2.6.31-21 and initrd.img has finished loading, and I have taken quiet splash out of boot line, I get nothing on the external display until gnome come up. Does the kernel driver only recognise internal displays until X takes over, or is there something wrong with the karmic 855GM kernel driver?
View 1 Replies
View Related
May 11, 2010
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
View 3 Replies
View Related
Nov 15, 2010
so, when i first got my laptop it came with vista and the ethernet worked fine, then when I decided to install Karmic about 9 months ago it still worked fine. After a while the update for lucid came out so I upgraded to that and then the ethernet started getting buggy. It would only work about half the time that i wanted it too and the other half of the time it would just stare at me and not move anywhere. So along with a couple other bugs I decided to format my harddrive and downgrade back to karmic and await the 10.10 release. unfortunatly my ethernet woes carried with me and they still would only show up on occasion. then about half way through my time with karmic round 2 it stopped altogether, and with the upgrade back to lucid it hasn't seemed to solve itself.
I ran through ifconfig -a, lspci and sudo ifup -a but they all tell me that the device doesn't exist.
View 6 Replies
View Related
Jul 25, 2010
I want to switch off 3d i.e. dri on my laptop to save power. There is a bug in the intel video driver that makes it generate excess wakeups and thus increase power consumption. I don't use 3d so this is very annoying.
I have tried modifying /etc/X11/xorg.conf to insert an "NODRI" option in the "Device" section and have commented out both of the "load dri" commands in the "Modules" section. No go. When I look in the xorg log, these changes are seen but not acted on. The system appears to have hardwired defaults set somewhere which are difficult to override. It appears to be a new issue because with Karmic one still had control with xorg.conf.
Just generally I don't like changes like this because it is not documented on the wiki where and how to change the defaults in Lucid. Linux was supposed to be easily configurable so IMHO this is a step backwards.
View 1 Replies
View Related
Sep 21, 2010
I've gone through many different threads about sound problems with Lucid, but so far, nothing I've done has helped. I get absolutely no sound in this installation. Everything was working until I upgraded from Karmic.
For a while, I thought it might be my sound card, so I put in a new Sound Blaster card, but was still unable to get sound. I have since removed it, but still available if I need to re-install.
System particulars:
uname -a
Linux odin 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 x86_64 GNU/Linux
lspci -v
[Code]....
If I try to launch System->Preferences->Sound, I get a popup with "waiting for sound system to respond".
I've tried a number of things (including deleting the pulseaudio files, upgrading alsa etc) from my user but cannot get sound to work. correctly.
View 1 Replies
View Related
May 12, 2010
I would like to disable the start up sound when Lucid boots up and enters X. I have already unticked:
System, Administration, Login Screen: [ ] Play Login Sound
Yet I still get the login sound.
View 8 Replies
View Related
May 26, 2010
I upgraded to Lucid from Jaunty on a 3 1/2 year old toshiba Satellite by doing a clean install. There is no sound anywhere. I had no sound problems with Jaunty. I ran the alsa upgrade script from this site:
[URL]
There was no change I could see after this was done.
In sound preferences>
hardware--there are no entries;
input--the input volume is shaded
output--the entry is Dummy Output stereo
The alsamixer shows only the pcm control, there are no capture controls. In select sound card (F6) I selected HDA ATI SB (default was only other choice). I have Linux Mint 9 (based on Lucid) on a Dell mini-9 and the sound works.
View 9 Replies
View Related
Jun 23, 2010
I tried Intrepid on this computer a few years back, and remember sweating over my computer for days trying to get the sound to work, before eventually giving up and going back to Windows. Now I figured I'd give it a second go. 100% fresh install, Lucid Lynx. I was hoping maybe the new version would have fixed whatever I was having trouble with before. No such luck. Have checked that nothing is muted, in the tray icon and in alsamixer and in a bunch of others. Have made sure that I'm in all the proper groups.
"aplay -l" gives me:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
View 5 Replies
View Related
Jun 9, 2010
I upgraded to Lucid from Karmic.Im now using gnome but would like to get back to KDE. Sadly it seems that even with kdm and plasma-desktop packages installed, I run into a problem at login.If I choose from the downwards facing arrow on the botttom left of the screen, and pick "KDE".Then when I log in, it shows the first icon (a hard disk), goes black and plunks me back on the login screen.This is a Karmic>Lucid upgrade process and I wonder if something got borked in the process.
View 4 Replies
View Related
Oct 7, 2010
I am using 10.04 how can I upgrade to 10.10 ?
View 3 Replies
View Related
May 30, 2011
Installed Lucid as a dual boot on Dell Dimension2400. Upgrade Mgr gave me 501 upgrades to install, which Upgrade Mgr did, after which It locks up on login screen. I am getting the following error: [1.809435] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet00:0b:db:a1:a9 [9.412958] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear. Do I need to buy a new ethernet card, or is there a "BUG"?
View 1 Replies
View Related
Oct 11, 2010
Upgraded from 10.04 to 10.10 using standard Update Manager procedure. Now I get a sound (thump) in my speakers for almost every button click. The sound theme in System / Preferences / Sound is "No sounds". I would like to completely disable any "activity" sounds from the OS, but nothing works.
View 2 Replies
View Related
Apr 17, 2010
I just installed Ubuntu Lucid beta 2 on my desktop, and I can't seem to get the sound to work. I have a Soundblaster Audigy 2 card and the motherboard has built-in sound, but ubuntu doesn't recognize either of them. The only hardware option I have in my sound preferences is for SPDIF, and thats the only thing that shows up in alsamixer as well.
View 1 Replies
View Related
May 6, 2010
just installed Lucid 64-bit. everything running smoothly including the sound except no system beep from PC speaker. system beep is enabled in system -> preferences -> sound. What else can I try? I'm dual booting with Hardy and system beep works fine in Hardy.
View 4 Replies
View Related
