Ubuntu Networking :: When Click Auto Run Or Setup.exe File All Get Is Errors?

Jan 24, 2010

i am useing a D-link wireless usb adapter .i put it in to the usb port and tryed installing useing the diskand when i click auto run or setup.exe file all i get is errorsi have been trying everything posable but no luck.i dont have a sweet clue about this OS lolmy first time useing ituseing a gigabit mobo8800 gforce vid card2.9 ghz prosesser cor 2 duo650 psu newest ubuntu OS i would like to add that its not picking up any think i plug in to the usb ports

View 3 Replies


ADVERTISEMENT

Ubuntu :: File To Click That Will Auto Activate Commands?

Apr 6, 2010

is there a way to setup a file to click that will auto activate commands?example, i want to load a program on wine and jump straight to it. but the program is in "program files" and "fallout tactics" so to load in terminal i have to use $ cd ~/.wine/dosdeviecs/c:/Program Files/Interplay/Fallout Tactics/
$ wine BOS.exe -wgand i want to find a way to activate BOS.exe with -wg either by a launcher or by the "configure wine" options but i dont know what -w or -g associate with?

View 1 Replies View Related

Ubuntu Networking :: Messed Up /etc/network/interfaces - Original Auto Eth0 Setup Is Missing

May 24, 2010

I'm trying to setup my interfaces along side GNS3 for study purposes, and came across a ..... vid saying to try this (my current config)

[Code]....

I'm praying for some crappy syntax error, also in Network Connections... its now blank, the original auto eth0 setup is missing

View 1 Replies View Related

Ubuntu Security :: Remote Desktop Allow Button Auto Click?

Oct 14, 2010

I have a home LAN server with Ubuntu Desktop edition 10.10 and I'm having a problem with remote desktop application. For now I have a monitor on that machine, but in the future it's gonna be only the box, without any periferal devices. When I try to log in via UltraVNC from Windows XP, on Ubuntu server a little window pops up, asking me to allow or refuse this "invader", so I click Allow and I really have full control on that machine. However, when I dont have any devices I wouldnt be able to click this Allow button, but will have to have full control. So, my question is how to autoclick this Allow button? Or when I try to log in the ubuntu machine, it would automatically give me full control?

View 5 Replies View Related

Fedora :: No Errors But After Finished Click To Start Skype Nothing Happens?

Dec 22, 2010

i just installed skype after downloading it from the officail site fedora package installation went smooth with no errors but after finnished i click to start skype nothing happens

View 7 Replies View Related

Ubuntu :: Auto Detect Hard Drive Errors?

Jan 22, 2010

Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.

Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.

View 9 Replies View Related

Software :: Firefox 4 Underscore Spelling Mistakes In Red But Can't Right Click To Auto Correct

Jun 13, 2011

I am using Firefox 4. It came preinstalled with Linux Mint 11. I have added my own tweaked prefs.js (contains all about:config changes). Firefox 4 underscore spelling mistakes in red but I cant right click to auto correct them! I renamed .mozilla to .mozilla.old and started FF and this solved it. However is there another way to fix this? I have all my addons and about:config settings just as I like them and don't want to start all over again.

View 4 Replies View Related

Networking :: Ethernet Auto-connect / Auto-sense Doesn't Work

Feb 3, 2011

I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.

Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.

View 3 Replies View Related

Slackware :: Configure Mouse Click Interval Since A Single Click Is Recognized As Double Click?

Apr 29, 2010

I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?

View 4 Replies View Related

Ubuntu Networking :: File Sharing Setup Using NFS?

Aug 4, 2010

I have tried to set up file sharing using ssh, samba with no luck. I now have it set up using NFS the only thing is it is just one way and I need it both ways. I was wondering if I installed the same packages on the other pc if I could make this work both ways.

The command I used on the first pc was:
sudo apt-get install nfs-kernel-server nfs-common portmap
And on the other pc the command was:
sudo apt-get install nfs-common portmap
Or is there a better way?

View 7 Replies View Related

Ubuntu :: How To Setup Out Of Office Auto Reply

Sep 15, 2010

Very recently I started using Evolution as my mail client. Before that I was using MS Outlook. Everything seems to be OK with Evolution but I find 2 startling limitations.

1. How to set up out of office auto reply
2. What is the equivalent of mail archive.

I tried to google it and looks like many people have the same issue but no proper solution. Is this really a limitation with Evolution?

View 2 Replies View Related

Ubuntu :: Simple Script Errors Out At Setup Commands

Mar 22, 2010

I am trying to make a simple script. The first part works to untar a file. When I try to CD from within my simple script.sh file to the new directory just untared and run the setup commands it just errors out and says something about having no directory or something and saying that it cant make without configuring or something.

#!/bin/bash
for file in *.tar.gz
do
tar -xvzf $file
done

cd some-directory
./configure
make
make install

View 1 Replies View Related

Security :: Errors In HTTPS Setup

Aug 17, 2010

I have just installed SSL certificate for my private domain (it runs on a private ip in a local network). I got the trial SSL from thawte. I have successfully installed the certificate.

View 1 Replies View Related

Debian Configuration :: Setup Synaptics Tapping - Right Click Button

Jun 4, 2010

Is it possible to setup tapping so that a fast tap with two fingers behaves like the right click button.

View 12 Replies View Related

Ubuntu :: DamnSmall Fails To Boot After GRUB Auto Setup

Jan 31, 2010

I installed karmic, then damn small linux - the DSL's loader would not recognize my xubntu automatically, so I got GRUB 1.97 on xubuntu and it recognized my DSL and added it to the menu with 3 alternative resolution options.

Now, xubuntu starts fine, but when I start DSL in any of the modes, I get the following output:

1. 'vga=normal is deprecated use gfxpayload=text before linux command' comes up in the same font as GRUB menu is displayed - but only for a split second, I had to video it to read it!

2. Uncompressing linux... ok, booting the kernel - similarly, disappears before you can read it, and the computer reboots.

Below are my /etc/default/grub and /boot/grub/grub.cfg.

Does all that mean I want to edit /boot/grub/grub.cfg even though I apparently must not?

NB I have some problems with my hard drive, I have to fdisk it a lot but that's probably because my laptop has a dead BIOS battery - I'm having to fdisk it every time I boot up etc. I'm a bit lost with this to be honest! Anyway, please forget the hard drive note unless you seriously suspect it's at fault for GRUB problems.

Code:

Code:

View 4 Replies View Related

General :: Auto Setup External Monitor?

Aug 8, 2011

Does anyone know what program I can use to set it up so when I plug in a VGA or HDMI monitor it automatically sets up video output?-P.S. -This is on a ArchLinux install with PekWM for the window manager

View 5 Replies View Related

CentOS 5 Networking :: Which File Can Setup Up Network Interfaces

Jul 20, 2009

which file can setup up my network interfaces? i was able to setup the nameserver using /etc/resolv.conf but I cannot find anywhere to configure the ip and and gateway. I could't find /etc/network/interfaces as you do on Debian

View 1 Replies View Related

Networking :: Setup A PXE Kickstart Installation - File (ks.cfg) Not Picked The Machine

Aug 4, 2010

I am in a VMware environment, and using RHEL 5.4. I am trying to setup a PXE Kickstart installation. For this I have configured DHCP and TFTP, made a kickstart file and shared it in the network through HTTP. My problem is that somehow kickstart file (ks.cfg) is not picked by the machine in which I am installing the OS. Although, the contents of my kickstart file can be viewed over HTTP. Please see KS_Error.jpg.

[Code]....

However, I believe DHCP and TFTP is working fine as I am getting the correct IP 192.168.1.115 which I have set in /etc/dhcpd.conf. Also, my label 1 which I have set in /tftpboot/linux-install/pxelinux.cfg/default is working fine as I able to locate initrd and vmlinuz. Please see attached Image_1.jpg how to troubleshoot this. I need to paste any of my configuration files?.

View 14 Replies View Related

Networking :: Make PC Ping Each Other - File Sharing And Printing Setup

Jan 26, 2010

I have a Netopia 3000 Series Internet Gateway [URL] & windows 7(laptop) & ubuntu 9.10.
- My laptop connects to it wireless and my ubuntu via ethernet cable.
- I am trying to setup file sharing and printing. How do I go about in making them ping each other? the networking side.
I logged in the router & check and windows has ip 192.168.100 & ubuntu has 192168.1.2

View 2 Replies View Related

General :: (xubuntu) Click On Webpage File And Open File With Emacs?

Aug 26, 2010

I am using xubuntu and there are a few types of files on website that instead of downloading and saving and then opening with emacs, I would rather when the radio button choice comes up say open with emacs. I am using xubuntu with xfce, and there is no line for a command to be entered as some ubuntu editions have. In the choice of changing the opening program from mousepad to something else, it says search and allows to navigate to find a program, but I cant find emacs anywhere not in etc/ or elsewhere. So where is its executable to direct the program chooser to?

View 1 Replies View Related

General :: Auto Reply Setup Process In Squirrel Mail

Jan 24, 2010

I have configured mail server using Centos. I have also used procmail and used squirrel mail as webmail browser. I want to provide auto reply facility to my users? What should I do?

View 5 Replies View Related

Ubuntu :: Shell, Auto Append Number To File And Read From External File?

Oct 31, 2010

Code:
cat ${SOURCE}/{start,universal,index,end}.txt > ${SERVER}/index.html
cat ${SOURCE}/{start,universal,02042010,end}.txt > ${SERVER}/02042010.html

[code]....

View 3 Replies View Related

Networking :: Prevent Auto Up An Interface At /etc/network/interface File ?

Jul 18, 2011

I have a ppp0 entry with post-up options like this

mapping ppp0
map none photon-plus motorola
map timeout: 12

[code]...

View 8 Replies View Related

Software :: Openbravo Installation / Ant Setup And Setup-prerequisites File (don't Remember Exact Name)?

Apr 27, 2011

i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).

Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).

As soon as i issue ant install.source it ends up with some errors..

View 2 Replies View Related

General :: Configure File Successfully But Make File Displayed Some Errors?

Jun 29, 2010

i am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!

View 1 Replies View Related

Software :: Gnome With Associated Applications For Registered File Types / Cant See Apps From "open With" Menu When Right Click To A File?

Oct 6, 2010

I am using Ubuntu 10.04 with Gnome 2.30.

I remove the applications which i don't use from main-menu. Now i can not see them from "open with" menu when i right click to a file.

Also it will be very nice if Ubuntu can show me on the "open with" menu the possibilities of applications which can open properly the file type which i want to open. I try to configure with ubuntu-tweak's "file type manager" but it is not possible to configure all of file types. I think Ubuntu's applications must to know which applications has to show for which file types. And i don't know how to do that. I need an application like this : url

I get a new user from the same OS, and i see that the same problem still there... For example many many compressed files, audio or graphic files are not associated with vlc or gimp.

I try to configure from system files of gnome but it is very complicated.

View 2 Replies View Related

Ubuntu :: When Click On Networking Icon In System Tray - Says Networking Disabled

Jul 13, 2010

I do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04

View 2 Replies View Related

Ubuntu :: Change A Folder's/file's Name Using One Mouse Click?

Jan 18, 2011

i would like to know if it is possible to have the windows like behaviour : when i click once on a file's / folder's name, the name is highlighted and i can change it's name. instead of right click > change name.

View 4 Replies View Related

Ubuntu Networking :: Setup A Server 10.04 Lts As File Server?

Apr 3, 2011

I set up a ubuntu server 10.04 lts as file server in a network filled with xp, win 2003 and win 2008.

I noticed that if from any bill's SO machine i copy a file (for example a vob file of 1gb, or a lot of doc and pdf files) in the samba server, while the copy is in progress if in another windows I browse other folders shared in Samba, the copy process stops and say ' the name in the network is no more available( or something like this). It seems that samba pay attention on the fact that a user is browsing the share and doing so it seems that Samba forget that in one of its share there was a copy in progress, very annoing. A file server cannot do that, in this way is useless.

View 1 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved