Ubuntu Networking :: File Sharing Setup Using NFS?
Aug 4, 2010
I have tried to set up file sharing using ssh, samba with no luck. I now have it set up using NFS the only thing is it is just one way and I need it both ways. I was wondering if I installed the same packages on the other pc if I could make this work both ways.
The command I used on the first pc was:
sudo apt-get install nfs-kernel-server nfs-common portmap
And on the other pc the command was:
sudo apt-get install nfs-common portmap
Or is there a better way?
View 7 Replies
ADVERTISEMENT
Jan 26, 2010
I have a Netopia 3000 Series Internet Gateway [URL] & windows 7(laptop) & ubuntu 9.10.
- My laptop connects to it wireless and my ubuntu via ethernet cable.
- I am trying to setup file sharing and printing. How do I go about in making them ping each other? the networking side.
I logged in the router & check and windows has ip 192.168.100 & ubuntu has 192168.1.2
View 2 Replies
View Related
Jul 7, 2011
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies
View Related
May 31, 2010
I am trying to set up a LAN with some basic file and printer sharing, as well as either a VPN or FTP server. I am setting up a server for an office with about 4 computers and one remote computer at a home office. I would like the server to back up a selected group of folders on all of the computers as well as share some printers between them all as well. If all of the other computers are windows computers will Ubuntu work for something like this? I would also like to host a website and e-mail server as well if the server is not loaded down too much. I know I can get windows server to work, but I would like to use something else if possible.
View 3 Replies
View Related
Dec 17, 2010
I'm going to be setting up our company with a in office server in the next few days. I wanted to use ubuntu as my servers OS but after reading some of the documentations I come to realize there is no X server in the server OS. I am OK with doing everything in terminal but would prefer to do some things in a graphic interface. Am I able to install the Xfree86 and be able to configure some stuff through that? Also the machine I am building for the server is not a true server machine just a really fast computer with lots of memory and space. The specs are a 3.1 AMD 64bit processor, 16gig ram, 2x 1TB hdd 7200rpm sata.
If the X server isn't a possibility on the server OS, I have read you can install all the server repositories on the Desktop Editions. Would that be a better option for me? Here is what I would like the server to do. I am going to be running quick books on the server with 1 workstation that is dedicated to it. We have 3 workstations and 3 users. We also would like to implement a Shared filing system and print server. Eventually when our current contract with our web host expires we would like to migrate the base website (not the ecom side) to this server.
View 3 Replies
View Related
Dec 18, 2009
I put together a 3 PC cluster approx. 6 years ago with Redhat, at that time I was in Grad. School. Now I am in a small company and we are planning to go for a cluster setup. I have chosen to go with Centos5.
The last time around I used NFS, RSH etc. for file sharing, communication etc. Would it be OK for me to go with the same stuff or some new software/technology has come in.
The Centos cluster setup is for high-performance computing.
View 1 Replies
View Related
Feb 11, 2011
I am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code:
[global]
workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1
[Code].....
View 15 Replies
View Related
Jan 28, 2011
**Edit: path for mount was incorrect Distro Server: CentOS 5.5
Clients:
Fedora(latest)
OSX(latest)
Backround I am attempting to setup a server in my house mostly(for the first time) for backups and file sharing. It is important to me that file permissions are preserved. So its my understanding that I must use idmapd in order for this to work. As of now I'm only working with the linux distros while osx will be dealt with once these two work together. portmapper is up and running, along with lockd on both machines. Firewalls are also down on both machines for now. The server side was all setup using the GUI interface with no extra options selected. Problem When attempting to "mount -t nfs4 10.0.0.2/$sharedfolder /mnt" I get an error operation not permitted with no error printing in /var/log/message. If I use "mount -t -o nolock nfs4 10.0.0.2/$sharedfolder /mnt" it mounts just fine. Ive checked both machines multiple times to make sure that lockd is up and running. In the idmapd.conf file I the domain as "localdomain" for both machines but I doubt that is right; like I stated above this is my first attempt at a server. I'm assuming the problem is a whole missing step that involves some kind of id mapping server I need to setup.
View 5 Replies
View Related
May 16, 2009
I'm going to setup a File and Printer Sharing in my little home network... 3 Computers actively connected to the Web through a single ADSL2+ Wireless Router (number of Computers will increase later) At the moment 2 of the computers are running Fedora 10 and 1 running Windows XP...
Now i want to setup the 3 machines to use 1 printer which is connected to one of the Fedora 10 machines, and i want File Sharing to be enabled so each machine can easily view each others shared files and also be able to print when ever needed (ofcourse the machine with the printer will have to be on for the printing process to happen) I've installed Samaba on each Fedora Machine, enabled sharing but i dont seem to be able to view the Windows machine or each other....
View 6 Replies
View Related
Mar 7, 2010
Trying to set up network sharing between Ubuntu 9.10 and Vista. I already did this with a wired Ubuntu 9.10 desktop and my Vista laptop but for some reason my Ubuntu 9.10 wireless and Vista wireless aren't as easy. They are all on the same workgroup "MAGIC" and I can see my ubuntu shares on the Vista computer but can't see the Vista shares on the ubuntu computer. In ubuntu I go to network>windows network>MAGIC but it times out at the MAGIC workgroup part and says 'unable to mount'.
[URL]
but no luck I also checked and there isn't a firewall that's in the way.
View 3 Replies
View Related
Mar 16, 2009
IM completly new to fedora but decided to give it a try after using ubuntu for a while,I have everything setup apart from sharing and im been fiddling for a while now.
View 1 Replies
View Related
Jun 17, 2011
I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.
View 1 Replies
View Related
Feb 2, 2011
I'm trying to setup a mercurial code sharing server on an Ubuntu machine but I can't figure out how to get it running. I'm setting up this server on a LAN so I don't want any security. Another thing I should mention is that I'm using Netbeans to code in Java. how use mercurial and tortoise (I've got them installed).
View 2 Replies
View Related
Feb 19, 2010
How can I share files between two laptops, both running Ubuntu 9.04, home wifi network situation?
There seem to be lots of Samba type programs etc, but I just want to know the simplest most straight forward way.
What needs to be in installed on each machine etc..
View 6 Replies
View Related
Feb 27, 2010
I just installed 9.10 and I tried to share specific folders by right clicking and selecting share. Not a problem.
However when I goto a Windows machine I see the share but cannot connect, says incorrect login/ password. I used the same login/ pass for the linux box and I created a new user and I still get the same results. What am I doing wrong?
I want to use the GUI for this please. When I edit the smb.conf I don't see the share.
View 2 Replies
View Related
Mar 10, 2010
I have two desktop computers on the same home network and I am unable to share files between the two. Both have access to the network. One is able to file and printer share using SAMBA and a windows 7 laptop. The other machine is unable to either do file sharing via Samba or SSL file sharing between the two Ubuntu machines.
View 7 Replies
View Related
Sep 15, 2010
How would I set up a LAN network at home between my computer that has Linux and someone else's computer that has Windows? and how would we share files and folders? It's easy if we both are using windows, so now I'm trying to figure this out in ubuntu.
View 1 Replies
View Related
Nov 30, 2010
I have a small home/office network, which currently consists of a very old mac running osx10.4, a windoze 7 laptop and an ubuntu 10.04/windoze vista laptop, along with a homebrew setup on a wii which understands smb. I'm in the process of setting up an additional ubuntu PC which will, among other things act as a file and web server, mainly for web development and for sharing files, music and videos.
Up until now I've just run everything on SMB, and I will have to set samba up on the new server, but I would prefer to use a different protocol for the ubuntu and mac systems, as SMB doesn't recognise/create file permissions properly and it takes a while sometimes to notice new files in folders it's recently looked in.
View 2 Replies
View Related
Jan 4, 2011
I have encountered many problems in Ubuntu, many of which I have been able to figure out how to fix myself (except a few tricky ones). Found a new one recently that I just cannot figure out. I have set up file sharing on my network between two systems running Ubuntu 10.04 (Lucid Lynx), one a desktop and the other a laptop. I Installed the proper packages on both systems, and it seemed to be working properly. However, on the laptop, when I try to mount or access the public-files of the desktop or laptop I receive the following error:
Code:
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
[code]....
View 4 Replies
View Related
May 6, 2011
I have 4 computers/users and we need to put all the files on a central server. The server is running Ubuntu 10.04. What is the best way for these 4 XP users to see the files that will be stored on the server?
Or basically, how will I either share or map the files *from* Ubuntu *to* XP? Also, the users will be reading, writing, creating and deleting files on the server.
View 3 Replies
View Related
Feb 21, 2010
I have two computers in my local network one with Ubentu Karmic 64 and one with Win7 64. The problem is in file sharing. I would like to be able to have access from one computers to another in both ways. But now I have only access from ubuntu to windows shares. On win machine I'm able to view ubuntu shared folders and printers but not able to browse them (or use printers from windows). I tried to change samba configuration, but my knowledge is to poor to solve this problem
View 9 Replies
View Related
May 23, 2010
I have a desktop and laptop both running ubuntu 10.04. I have them going through a wireless router, the desktop is wired of coarse. I installed just about all the samba packages in synaptic that have the little ubuntu symbol next to them on both desktop and laptop except the Kde and document packages. I installed the two necessary packages to enable personal file sharing to work. But I can't seem to access files back and forth from these computers.
View 5 Replies
View Related
Jun 6, 2010
I am at a total loss. For all intents and purposes - sharing files over a lan without a password between this ubuntu 10.04 machine and my wifes laptop (windows 7) should be trouble free. I've installed samba, and created an smb.conf file in /etc/samba
Code:
[global]
workgroup = WORKGROUP
server string = Samba Server
netbios name = oak
security = share
[Code]....
I want to note that I was using Arch Linux and this exact setup worked flawlessly. Why on earth would it not work the same in Ubuntu? Is it not the same Samba?
View 5 Replies
View Related
Jul 3, 2010
I did a fresh install of Lucid alongside Vista on my laptop, a Toshiba Satellite A205-S5804. When I went into "Personal File Sharing" under System > Preferences, it said that the necessary packages were not installed. Using the documentation at this link: [URL] I went into a terminal, opened shares-admin, and as promised it told me that I didn't have the right software installed, and allowed me to check both NFS and SMB to install. I did so, installed, and at the end, it said everything was successful.
After exiting the dialog, the window asking me to install NFS/SMB appeared again. I selected to install, it disappeared, and then reappeared. It did this repeatedly, until I decided to close it out. I then went back to the guide, and went to add a new share. But the drop down box would not allow me to choose Windows share, only Unix (NFS). How do I enable Windows File sharing? I have used Ubuntu in the past and have got it to share with Windows computers flawlessly. Now, it appears that this essential (for me) functionality is broken.
View 9 Replies
View Related
Jul 28, 2010
For the first time networking my home computers I'm not interested in getting Ubuntu boxes to to talk to Windows and we now have Ubuntu on all machines.
I'm trying to use the "Personal Files Sharing Preferences" but there is a message telling me I require some packages. Most unlike Ubuntu but it doesn't tell me what packages I do need.
Uploaded with ImageShack.us
What I would really like to do is have access to sertain directory's on other computers and have full access to read/write within the home directory.
View 6 Replies
View Related
Aug 1, 2010
I've been trying for what seems like forever to share a single directory with only two authorized users and I just can't get the permissions right.
Running Ubuntu 10.04 desktop as home file/print server.
Two users: chris and gretchen
Directory to share: Music
Music resides in chris' home folder.
I'd like to have full access for these two users and no access for anyone else. The challenge is that the best I can get for gretchen is read-only. What i've done so far:
Created user accounts for each
Created Samba accounts with passwords for each
Created a group called "family" and added chris and gretchen to it
Assigned the family group to the Music folder.
Shared the folder giving read and write access to family group.
chris seems to work ok but when gretchen access it from her snow leopard laptop she can't create a new folder. It should be noted that chris is also the admin account.
View 3 Replies
View Related
Oct 27, 2010
Ok Ive tried soooo many tutorials and been through sooo many forums but I cant get my file sharing to work from any computer. Ive got a - Ubuntu 10.04(64bit) desktop to use as a home web/file server, wired.(BEN-SERVER)- Vista(32bit) laptop, wireless.(BEN-LAPTOP)- Windows 7(64bit) desktop, wireless.(BEN-LAVIE)- EchoLife HG520s ADSL2 wireless modem.
At the moment...In Ubuntu network browswer it only displays BEN-LAPTOP.But trying to browse BEN-LAPTOP I get "Unable to mount location Failed to retrieve share list from server".Vista only displays BEN-LAVIE and browsing gives me "Windows cannot access \BEN-LAVIE"And Windows 7 doesn't display any.Previously I was able to share between Windows 7 and Ubuntu but I don't know what I did but it stopped working. I have since reinstalled Ubuntu and tried again from scratch but no luck
View 9 Replies
View Related
Nov 2, 2010
I was wondering if it was possible within Ubuntu to:
a) Make a shared folder to the extent that people can view it but to access/open it requires a password.
b) Set that folder to have a set size (quota) so that people putting files onto the store/folder don't flood my computer with video/music.
I am currently at Loughborough University and am on their LAN as I type.So guys/gals are there any programs on the synaptic that do such a job or does Ubuntu already have an inbuilt way of doing that.
View 1 Replies
View Related
Apr 29, 2011
trying to share a few folders with Windows PCs. Usually I just right click and choose "Sharing Options" from nautilus and choose to share it. This isn't there in gnome 3 via gnome3 ppa for Ubuntu. I've tried installing and adding the folders I wanted using samba configuration tool and gadmin-samba tools. I've also installed just about anything that could potentially have anything to do with file sharing from synaptic including:
samba, nautilus-share, smbclient, windbind
and whole lot of other stuff in hope that I had just been missing stuff. I also booted my laptop which is running 11.04 with Unity and I right clicked and selected "Sharing Options" like the usual way and shared a folder and then installed gadmin-samba and the samba configuration tools and the folder I shared wasn't included there. Meaning it isn't using the same thing? Also the only thing installed when shareing a folder is samba and some libpam-something. Two files! Then shares perfectly! Why is it so difficult to set up a simple share with Gnome 3? No matter what I do I boot into Windows on my laptop and try to connect to my network share the same way I always have and it doesn't work.
View 9 Replies
View Related
Feb 14, 2010
I recently installed Ubuntu with partion with Vista, and I am enjoying the Ubuntu experience will buy a book and learn this awesome OS, my question is this:
My wife has a laptop that runs Vista, and when i use my Vista she can see my files and I share this hard drive with her, but when i run Ubuntu she cant see this drive, i have extrernal hard drive as my backup with lot of different files on it and she can pull files from it but when i use Ubuntu she can see on her Vista Network, how can i make so when i use Ubuntu she can see my drive? On my Windows i set up sharing of files but how do the same with Ubuntu.
View 1 Replies
View Related
