Ubuntu :: Auto Detect Hard Drive Errors?
Jan 22, 2010
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
View 9 Replies
ADVERTISEMENT
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
Nov 3, 2010
When I try to install it gets to the partition manager screen but does not see the hard drive.
Hardware Specs:
AMDX64 3800+ Socket 939 duel core
Asus a8n32-sli motherboard nforce 4 chipset
Nvidia 8600gts
2 GB Mushkin Memory DDR 400
Samsung 80GB Model: HD080HJ/P Hard Drive
Things I've tried:
I tried a different hard drive Western Digital Model:WD1600bevs - That Works Fine.
I tried Different Versions of Ubuntu 9.10X86 9.10X64 9.04X86 - None Detect Hard Drive.
I Tried Jumping the Samsung Drive from 3.0 Sata 2 to 1.5 - No difference
I tried th Samsung drive in an External USB 2.0 Encloser - Drive Works Fine.
I also tried installing Windows XP on the Samsung drive, Windows Detects the drive.
I deleted all partitions with acronis and repartitioned for Linux ext3 Filesystem.
At this point I determined that the drive works fine, The bios detects it no problem. Windows detects it no problem. My ubuntu CD's all pas integrity checks and will see a Western Digital Hard Drive No Problem. In my opinion it is like Ubuntu just doesn't support that perticular drive for some reason. Maybe Firmware?
View 3 Replies
View Related
Jun 29, 2010
This is probably a stupid questions but it's a pet peeve of mine. I have three hard drives you have to actually open them before they show up in other areas/on the desktop.Is there a way that when ubuntu starts they just automatically are detected?
View 3 Replies
View Related
Sep 10, 2010
I have a Toshiba Dynabook 2010 laptop and I want to install DSL linux on it.The problem is when I boot with DSL Linux there is no hard drive named /dev/hda1 and fdisk -l command does not return.How can I overcome this problem?And I could only boot into DSL if I use the nofstab as a kernel parameter.when I boot with fstab then kernel panic will occur.
I again checked, now there is a /dev/hda but my hda should contain two ext3 partitions.But the problem is the kernel doesn't recognize them.I got debian in my Had disk too.The problem is debian can recognize these two partitions.
View 1 Replies
View Related
Aug 3, 2010
my last hard drive had bad sectors so we got a new hard drive from newegg. this is a brand. new. hard drive. never been formatted before. so i started with the windows setup disc to get it to partition the drive and give kubuntu (working off 10.04 its ordered from canonical) something to work off. it still didn't work. so i got gparted on here to see if it could - im running off the live cd - do anything with it and i find that kubuntu doesn't even recognize there is a hard drive there. i got into the terminal to check the sudo lshw -C disk thing and it swears 'C' is my cd drive.
My bios is also as high as it can go, they stopped making my board. so. any ideas? i cannot install windows as i have lost the key so getting this installed and fixed has to be done through ubuntu on a live cd.
View 2 Replies
View Related
Oct 28, 2010
When I try to install Ubuntu 10.10 on my desktop, the partitions menu that appears during the installation doesn't detect my sata hard drive. I have Windows 7 on a partition, left a space unpartitioned, then tried to install it. Coudn't detect the disk, so I booted to live ubuntu, and created a ext3 partiton with Gparted, it still doesn't detect. Also tried completly formating the disc. Still Doesn't detect. The strange thing is that in the ubuntu desktop when i boot with Live usb, the disk is there. I was also able to create the partition as i described before.
View 9 Replies
View Related
Feb 28, 2010
I recently got the Ubuntu 9.10 cd desktop-i386 (i ordered it from canonical) and i tried to install it , but when i came to step 4 (to partition the HDD) it doesn't recognize my hard drive (3 partitions : 15 gb ext4, 37gb ntfs , 25 gb ntfs).I run Windos XP on 37 gb partition withot problems. I reserved that ext4 for karmic. Also i booted up the live cd to try smth in the terminal...i tried with sudo apt-get -y remove dmraid but still doesn't work.Also when i looked into Places menu the HDD partitions were not there.Also i don't know why but if i dont select ACPI=OFF, ofter booting up desktop freezes after 10 sec...when i select ACPI=OFF it runs great. And when i select ACPI=OFF and NOLAPIC from the F6 boot menu , ubuntu detects my hard drive in places menu and installation menu,but after 15-20 sec the screen freezes and i must restart .I dont think it's the cd because when i tested the live cd at my friends computer it detects their HDD, even without NOLAPIC ! I don't know what to do and i really need Ubunt. Do i need to upgrade my BIOS or what ?
View 4 Replies
View Related
Sep 15, 2010
I added new hard drive on a machine running linux redhat linux 5 and I need to define and format this drive to be usable.
View 5 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Apr 21, 2010
I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
View 4 Replies
View Related
May 26, 2011
I am installing Fedora 15 for the first time - Fedora-15-x86_64-Live-KDE.iso. I used LiveUSBCreator to copy to a memory stick.
I boot OK and start the install process and choose "Basic Devices" but it does not appear to detect my only hard drive (SSD). All it detects is the USB memory stick that I booted from.
I have Windows 7 on my disk. There is about 50GB free space which I planned to use for Fedora.
View 2 Replies
View Related
Aug 4, 2010
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
View 1 Replies
View Related
Sep 24, 2010
I have a laptop, running Windows Media Centre unfortunately, and I think the hard drive is hosed. I was wondering is there away of checking the hard drive for errors using the ubuntu livecd? I would put ubuntu straight onto it only there are various items within Windows that the owner needs to get.
View 2 Replies
View Related
Nov 8, 2010
i am currently running palimpsest (system -> administration -> disk utility) and letting it "check" an unmounted filesystem.
i know its just running fsck.ext3 on this drive... the drive is formatted ext3, and is used on a hardware media player (WDTV Live Plus) in another room... i just moved it in here to avoid copying recorded HD shows over the LAN.
anyway, i was informed at boot with this drive connected that it needed to be checked, after booting it is mounted, but says it has errors and needs to be checked. it is checking, i would assume messages from fsck.ext3 would be logged to /var/log/fsck/checkfs, but i have never been interested in this type of thing before... usually when my drives start to get errors, its time to replace them... this one im sure is caused by being unmounted incorrectly by the stupid WDTV Live Plus...it locks up sometimes, lol...
i dunno, this is a big drive. just wish there was some "status update" other than a whirling indicator... im tailing the log file i mentioned above, but so far it just has "Nothing has been logged yet." (which i take as a really good thing at this point.
EDIT: at the very end of the filesystem check, i got a message about the filesystem being clean with no errors. id still like more of an indication than "whirling indicator thingy"...guess ill go back to CLI for checking filesystems. lol
View 3 Replies
View Related
Jul 10, 2011
I just bought a new hard drive for my lenovo ThinkPad R60e. It is the following model:
Code:
# hdparm -I
ATA device, with non-removable media
Model Number: WDC WD5000BUDT-63G8FY0
Firmware Revision: 01.01A01
[Code].....
After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
It is regardless which kernel version I use (latest ARCH Linux 2.6.39 or 2.6.23 from a grml live system), the error is persistent everywhere.
View 2 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Jan 3, 2010
I just purchased a Western Digital My Book World Edition External hard drive and need to mount and format. My router sees the connection but I am now unsure how to proceed. Will linux detect the new device through my wireless connection? I know very little about Unix based or Linux commands.
View 10 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
Apr 7, 2011
Easiest way to auto mount an ext4 partition on my hard drive?
View 3 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
May 12, 2010
I installed Debian on a old hard drive (quantum 5gb) and ran with it for a couple of days.. BUT all my data (including windows) is on my other hard drive.. so my question is What do I have to do to make grub detect windows and linux when I attach the 2-nd hard drive?
View 2 Replies
View Related
Sep 8, 2010
I installed Ubuntu 10.10 beta yesterday and most of it is working very well. However, I ran into a problem with permissions today.I have a HDD containing my home folder and a HDD containing my data folder. The HDD with the data folder is mounted on /media/data/data_1.
Code:
jensen@jensen-desktop:~$ ll /media/data/ | grep data_1
drwxrwxrwx 8 jensen jensen 4.0K 2010-09-07 23:10 data_1/[code]....
I made sure I had set a+x rights on the file, tried executing it as root but the permission error stayed.When I copy that same file to my Desktop folder I can perfectly execute it.When it's located on the other hard drive I can't. I tried several command line scripts and they all work when I execute them from my OS hard drive,but not from another hard drive.
View 2 Replies
View Related
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
View Related
Jul 10, 2009
I just upgraded to Fedora 11. (I decided to give 64bit a try and I am extremely impressed.Not one problem at all! Kudos to the devs.) Whenever I log in I get the Palimpsest Disk Utility telling me two of my hard drives have a reallocated sector count.I have two 1.5Tb Seagate drives (model #: ST31500341AS). One is a backup of the other. On the first disk the disk utility tells me I have 22 reallocated sectors and 53 on the second. I've been on Google on discovered that there is no easy way to fix this and that a few bad sectors are okay but too many is a sign of imminent drive failure. This obviously concerns me because both my main drive and its backup are showing errors.
I went to Seagate's website and downloaded their diagnostic software (Seatools for DOS) and it passed both of these drives.So, questions: is it possible that Fedora is giving me a false positive? If not, is 22 and 53 sectors something to be concerned about? If so, should I contact Seagate and see if I can pull warranty on these drives? Is there a way to repair this damage?
View 5 Replies
View Related
Dec 16, 2010
I had a set of rather unusual problems on installing a new 500Gb hard drive on my F14 system, I've solved them, but they were that unusual that I thought I should share them in case anyone else gets the same thing! I'd been experiencing intermittent faults on one of my drives, (lock ups for no reason, occasional boot ups that failed due to ' disk unreadable errors' and other odd errors). I assumed that the drive was failing, but it always showed 'Heathy' on disk utility! This was the disk with the OS on, plus my main 'data' disk had some bad sectors, so I thought I'd buy a nice big 500Gb and reinstall the whole system.
I backed up all my data to an external 'USB' drive, opened the case, (a big old under the table 'desktop', why do they still call them 'desktops'?) shoved in the new SATA drive and rebooted, intending to format the new drive to EXT4 and partitioning it before installing F14 again! OOOOOOOOOW! Major drive failure, missing OS, whole list of SDB errors! Control D, to reboot, BIOS only sees one drive; SDA (I have three, two IDE and one SATA) plus the one I just put in makes four. I go into BIOS and discover that it not only cant see any of the other drives, but my two DVD drives are missing too!
Now I've been building my own systems and mucking about with computers since before you could buy them, and Ive never seen a problem like this one! At first I thought the new drive had screwed my system, for on removal, the problem persisted! Then I noticed that the IDE connector in drive SDB, (the long 40 pin job) was just slightly out of line with the back of the drive, pushed it firmly in and what do you know, everything works! We moved recently and I think the vibration was enough to loosen the connector to give intermittent faults, and pulling the cables about to get the new drive in, pulled it out further......
View 10 Replies
View Related
Apr 29, 2011
I am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies
View Related
May 18, 2010
Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies
View Related
Jul 26, 2010
Subject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
[Code]...
View 9 Replies
View Related
