Networking :: Host A DownloadURL For TF2 Server?
Jul 1, 2010
I didn't know where to turn as a linux nooby. If you want to hear my story, continue. I wanted to host a TF2 server for my clan, and started reading up. So, I throw Linux on my laptop (ubuntu) and after about 3 hours I FINALLY have a WORKING CONFIGURED server that my friend was able to join and I was admin on. However, I wanted a Downloadurl for my bz2 files. My question is, how do I host a website where I can upload files and put it as my downloadurl for my tf2 server on linux, and if you can,
View 3 Replies
ADVERTISEMENT
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Sep 5, 2009
I am trying to set up a nfs server on my Fedora 11 host machine so that my virtual machines on the same host can access files on the host.The ip address of my host machine is 192.168.1.132The ip address of my virtual machine is 192.168.122.180I can ping successfully from host to virtual machine and vice versa.On the host machine, I have the following :1) Edited /etc/exports to add this one line./home/stardust496/files 192.168.122.180(rw,nohide)2) service rpcbind restart3) service nfs startOn the irtual machine, I do the following:1) mkdir /mnt/files2) mount 192.168.1.132:/home/startdust496/files /mnt/filesBut the mount call does not succeed. (It hangs for a while and then returns saying that it did not succeed)
View 3 Replies
View Related
Feb 1, 2011
I'm setting up apache on centOS 5.5 and administering it from another host on my LAN(this web server has no Xorg). I can ping from the config host to the web server but not the other way. My network is quite a way from being set up so i'm just configuring the web server at the moment, the simplest way i can. It's just trying to get two LAN hosts both with 192.168.1.0/24 I.Ps to talk to each other using a router to connect them.
Here are the outputs of ifconfig and netstat -rn for the web server, the config host and the router:
The ifconfig -a and netstat -rn of the config host are:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
[code]....
View 5 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Feb 19, 2010
I am using Ubuntu on a Windows network.
One of the computers have apache server (working), it has 192.168.1.6 IP, and the name of the computer on the network is "servidor"
I can't access from ubuntu, if I type http://servidor or 192.168.1.6, it goes to [URL], but I can access shared folders, just the host intranet server I can't
I have vmware with windows xp, and I can access http://servidor from there, but not from Firefox in Ubuntu.
View 4 Replies
View Related
Oct 13, 2010
I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
View 3 Replies
View Related
Jun 3, 2011
All I want is to be able to access files on one Ubuntu computer from another Ubuntu computer via a home wireless network. I have been at this for a week now. Scouring the web for answers and so far I have come up with this: Port 22 is open. I have both computers IP addr's via right clicking on the network icon-> Connection Information. ssh is installed and running. Both computers are listening on port22. But when I try Places->Connect to server, I get "no route to host". I'm not a networking guru and I'm at a complete loss on this.
View 9 Replies
View Related
Jun 22, 2011
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try.
Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
The Fedora 12 machine has the NFS server running, and the corresponding entry in /etc/exports is
Code:
/mnt/dvd *(ro)
I thought this might be a firewall problem, but it persists even if I turn firewalls off on both machines (client as well as server.) Also, doing
Code:
ssh 192.168.0.105
is OK, so what is wrong with the route?
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try. Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
I now tried
Code:
mount 192.168.0.105:/mnt/dvd -t nfs4 /tmp/scaleo
and it seems the mount succeeded. So, instead of nfs, one must write nfs4?
View 9 Replies
View Related
Jan 11, 2011
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
View 8 Replies
View Related
Jul 29, 2009
I have 2 clients (one IP 200.x.y.52 and another 200.x.y.47) in ADSL conection and a same gateway (200.x.y.1).
When the server send an email, the error "No route to host" appear. I used TELNET 200.x.y.52 25 (110 soo) and the error occurr in both servers and both directions. The Firewall was disabled .
View 3 Replies
View Related
Mar 4, 2010
I am working on a cluster for a molecular dynamics class and I have to edit my FORTRAN code (only the newest and best for me!). In order to get through to the cluster I have to ssh in. The network on which the cluster resides is behind a firewall, so I have to ssh through the firewall into the network first.
this is fine, I can login and move files and folders as needed, including sftp-ing into host 1, then into the cluster so I can transfer files from cluster to host and then host to me. This gets rather tiresome, so it would be nice to edit the files in place.
The problem is that when I access my code with emacs it launches the emacs client on Host 1, with no mouse support. I know the purists will howl about how I should be using keyboard shortcuts, but I am a chemist and not a programmer, so the mouse is very nice for me. Is there any way I can perhaps mount the cluster using sshfs so that when I open my code it launches a local instance of emacs? Sorry if this is the wrong forum, but I thought it was network related.
View 3 Replies
View Related
Oct 12, 2010
I got a bunch of machines (~10) that I share with my co-workers. I have appropriate .ssh file(s) set up so I don't get prompt for password when I try to ssh.Currently I ssh into these hosts and then do a top to check the load before I start using the machine. Because I don't want to be on a busy host.Can someone show me how to write a script that find a least-busy host given a list of hosts to check? (hardcoded is fine)
View 1 Replies
View Related
Jan 27, 2009
The internal network is behind nat done by the PC Router.The TP Link is recieving wireless signal from outdoors and it has switching and basic routing capabilities. I'm using the PC router for better routing options.PC Router (or R for short) is a triple-booting machine - Linux, FreeBSD and Windows. It has two lan cards - external (ext_if) - 100Mbps Realtek 8139 and internal (int_if) - 1Gbps integrated Realtek 8169.The problem is that all traffic from R to the network is slow - about 5-20K, while the traffic in the oppoiste direction is all right - about 10MB that is fine for 100Mbps cables, NICs and switches. The problem persist no matter the OS the pc R is running.I've tried some debugging on the situation as follows:
- put another PC at the place of R - everything is fine. That exclude the possibility of damaged cables, RJ-45s, switches and etc.
- connected both of the NICs to the Internet while the internal network is being disconnected and they both work fine (no delays)
- traffic shaping is not running
- there is nothing in firewalls except NATing the internal network (and it is working fine). Actually these firewall rules have been operational for more than months and everything was fine untill a week or two ago.
- changed the internal NIC with another
- connected the internal network directly to the TP and all of the PCs are getting good network performance. Then connected the R machine to the TP as well and there was good performance between the internal network PCs and R.
- R has good performance to the TP. In fact everything has good performance directly to the TP (when not connecting trough R).
- the problem persist only between R and machines from the internal network.
View 2 Replies
View Related
Jun 8, 2010
i have a problem with my internet connection in ubuntu 8.04 server edition. if i ping to: [URL]... i get: Destination Host Unreachable but when i ping to my gateway or other pc's in my network no problems occur.
View 9 Replies
View Related
May 19, 2010
So here's the setup:
Ubuntu 10.04 host inbound port 22 open
FreeBSD 8.0 host no inbound ports open
Both hosts are running sshd currently. What would you do for the Ubuntu host to be able to ssh to the FreeBSD host? A tunnel?
View 6 Replies
View Related
Oct 28, 2010
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
View 1 Replies
View Related
Apr 19, 2010
I have a SSH server "SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2" running at IP 1.1.1.1When I try to access it from another machine on the internet which is at 2.2.2.2 every thing goes fine. However when I try to do the same thing from 3.3.3.3 it does not work and Putty throws me this error "Server's host key did not match the signature supplied". I went inside HKEY_Current_userSoftwareSimonTathamPuttySshHostKeys and tried to remove all the known host and still the issue is existing, I am literally scratching my head as to what is going wrong.I Googled about this error and I saw many were having problem similar to mine however none were able to give some conclusive results so far.
View 15 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
Oct 15, 2009
Wanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....
View 5 Replies
View Related
Jun 9, 2011
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
View 3 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
View 10 Replies
View Related
Jun 10, 2011
Has anyone had any experience on using SUA(Services for UNIX Applications) rsync to "pull" files down to the Win2k3R2 server from a linux rsync host?I was trying to use cygwin rsync before until I found out from cygwin that the cygwin port of rsync was "flakey" and would fail intermittently for no apparent reason. cygwin suggested I use SUA or SFU for rsync services.
I've looked for/ am looking for any experience using SUA rsync to copy files down from a linux rsync host to the Windows host via rsync on the Windows host. Also, if you have done this successfully, do you have any pointers/caveats you can share on how you got it working? What I am basically looking to do is copy files and subdirectories of files from a linux host using rsync to some static location on a Windows server on a scheduled basis so that I can backup the windows server to tape using Symantec's Backup Exec application.
I'm doing it this way to avoid deploying the Remote Agents for either linux or Windows on the target hosts. As an alternative I've seen reference to a product called DeltaCopy that uses a native Windows rsync port with the native linux port of rsync to do what I need also.I realize this is not a strictly linux question, but more of a hybrid as I'm moving data to and from Windows and linux hosts. So, if this is too Windows-y a question, please say so and I'll withdraw my question.
View 2 Replies
View Related
Jun 1, 2010
I'd like to host my own email accounts. I have a Fedora 12 build that I like to use for doing this.
Only this is I don't know what all I need even get started. The book I have on RHEL talks about different email protocols and all but doesn't explain how to "do" anything.
View 4 Replies
View Related
May 25, 2010
I am running Ubuntu 10.04 Desktop, and I'm pretty fed up with having to pay companies to host my Mumble server, while its something I could handle to do.But I just don't know how to do, nor what to do.Ive scowled the Internet for legit tutorial but nothing adds up.How can I host my own Mumble Server?Can somebody give me a detailed tutorial
View 9 Replies
View Related
Jun 5, 2010
I would like host a ventrilo server. I followed all the instructions and I get to the part where you type ./ventrilo_srv and I get this:
I don't know what causes the the unable to bind to TCP socket.
View 2 Replies
View Related
Jul 8, 2011
Im going to registrate a Host on the fog server database.
i have done this befor on a working system befor, so i kinda know how to do it.
Im booting from the network, and im finding the server, and chose Quick host registation ( i have tryed the full host registration, but it dose not work there either)
after the Quick host registration and loading, this show's up:
Loading fog/kernel/bzimage......
decompressing linux .... Parsing ELF......Done
Booting the kernel.init.gz....
pci 0000:23:00.1: BAR 6: no parent found for of device [0xffff8000-0xffffffff]
unable to query synaptics hardware.
[Code]....
View 1 Replies
View Related
Oct 5, 2009
On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first
For that domain I have installed virtual host.
Quote:
I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.
View 8 Replies
View Related
Aug 17, 2011
I am experiencing a problem with Nagios running some checks on our Ubuntu 10.04 servers.
we have 16 Nos HDD in each servers. These HDD's are checking by nagios with CPU and users.
For whatever reason, all of the checks will come up with the response: "Connection refused by host".
We have checked the server at the time of occurence and all seems fine. No memory issues, no CPU issues etc.
Then within 5-10 minutes the problem goes away.
View 4 Replies
View Related
