Ubuntu Networking :: Installed The AR81Family-linux-v1.0.1.6.tar.gz Driver?
Mar 14, 2010
I installed the AR81Family-linux-v1.0.1.6.tar.gz driver for my new motherboard, model Gigabyte S-series G31M-ES2L on my ubuntu 8.10 system with the following errors:
wstay@wstay-ubuntu8:~$ ls
Desktop Documents Examples Music Pictures Public Templates Videos
wstay@wstay-ubuntu8:~$ cd Desktop/
wstay@wstay-ubuntu8:~/Desktop$ ls
AR81Family-linux-v1.0.1.6.tar.gz ubuntu8.10-menu.lst
[code]....
The following packages have unmet dependencies:
build-essential: Depends: g++ (>= 4:4.3.1) but it is not going to be installed
Depends: dpkg-dev (>= 1.13.5) but it is not going to be installed
E: Broken packages
wstay@wstay-ubuntu8:~/Desktop/src$
View 1 Replies
ADVERTISEMENT
Dec 1, 2009
explain the way to check whethere a linux driver is installed or not in Fedora 9. i would like to see if "plpevtch" driver is loaded or not?
View 7 Replies
View Related
Aug 9, 2010
So Ive decided to give Ubuntu a shot after many years of being abused by a Window.. Although it looks good so far Ive yet not managed to install drivers for my HD5850.Whats really stopping my is that I'm reading the instructions and I came across a little "must have" list, here is how it goes..
Code:
The following packages must be installed in order for the ATI CatalystTM Linux driver to
install and work properly:
[code]....
View 1 Replies
View Related
Jan 18, 2010
I have a Netgear WNA-1000 that I can't get recognized on any of my Ubuntu boxes (8.10, 9.04, 9.10). This page says that it should work with the ar9170usb driver, and that this driver is already part of the mainline Linux kernel as of 2.6.30. It also noted that ar9170usb does not claim this device's USB-ID at this time.
How do I (a) get this driver to recognize and work with my WNA-1000 under 9.10?
(b) get this driver installed and working under the older versions of Ubuntu that I also have?
View 3 Replies
View Related
Mar 22, 2010
Even though having already spent many hours trying to connect to the internet from Ubuntu, I still haven't done it succesfully. What I've done so far:
Code:
nuno@Houdini:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
bcmwl5 : driver installed
device (14E4:4318) present (alternate driver: ssb)
On the bar at the top, under 'Wireless Networks' it reads: "disconnected".
View 9 Replies
View Related
May 13, 2010
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies
View Related
Jun 7, 2010
I'm using a Dell with Broadcom bcmwl6.inf driver. I tried the guides using ndiswrapper, but they didn't work for me. What worked was simply going to System -> Administration -> Hardware drivers and activating the Broadcom STA proprietary driver. That sounds great, but every time I restart, I have to remove and install the driver from Hardware Drivers.
What should I do to keep the driver loaded and claimed at the start. This is my lshw -C network before and after removing and installing wireless card driver.
[Code]...
View 3 Replies
View Related
Jul 20, 2010
I've read a lot about wireless network cards but I haven't found something similiar to my problem. I've a belkin wireless card F5D7000tt and its driver bcmwl5.inf. I think I've correctly installed it because when I use "ndiswrapper -l" i get:
WARNING: all config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future realease.
bcmlw5.inf: driver installed
device (14E4:4320) present (alternate driver : ssb)
But when I go to Hardware Drivers I see that "Broadcom B43 wireless driver" is not enabled, and when a try to enable it I get an error message:"We are sorry, but the installation of this driver failed. Check the register archive to see more details: /var/log/jockey.log"
View 6 Replies
View Related
Oct 26, 2010
I have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....
View 9 Replies
View Related
Nov 26, 2010
i found this quote: WPA/WPA2 are broken in every module everybody has tried (AFAIK) since Adam's 1.7.1.1 DKMS driver. Downgrade like so: 1) Get the driver from [URL]... 2) Go to terminal, and move the pre-installed driver so it won't get loaded. cd /lib/modules/2.6.28-11-generic/kernel/drivers/staging/rt2860/ sudo mv rt2860sta.ko rt2860sta.bak. 3) Install rt2860-dkms_1.7.1.1_all.deb. It will also install dependencies needed to compile the driver. If it doesn't retrieve the right packages, make sure "build-essential", "linux-header-generic" and "dkms" is installed. Let it run and it should complete without a problem. 4) Restart. The new driver should work automatically. the deb file gives me an error.
View 9 Replies
View Related
Mar 22, 2011
I have just installed 10.04 on a dell inspiron laptop, but the wireless adapter will not work. I uses a broadcom BCM4312. When I click on the wireless icon, it says "firmware missing". Normally, I would connect to look for proprietary drivers, but my problem is that I live in an apartment complex with only wifi.
So my question is, A) does this sound like a driver problem, and B) if so, how can I get the necessary driver installed (after downloading it with another laptop) when I use lshw, it does show the wireless device, by says that it is disabled. I tried following the directions here [URL]... (changing "ieee80211_crypt_tkip" with "lib80211_crypt_tkip" due to the rename in 2.6.29. I think that is correct), but that did not work either.
View 5 Replies
View Related
Jan 14, 2010
Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
View 4 Replies
View Related
Mar 30, 2011
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
View 9 Replies
View Related
Jan 24, 2010
I used to have a PCi wireless card but decided to upgrade to a 802.11n device. I run the lshw -C network command and no output is shown for the usb dongle. I have installed ndiswrapper and it states the driver is installed, but a popup always appears stating that Ubuntu cannot recognise if the hardware is present, but once this is closed the remaining window shows the dongle is present. So Ubuntu (9.10 btw) can recognise the card is present in the windows driver window, but not in lshw -c network. Any ideas?
There are a number of posts about older Sweex products with different chipsets, but none seem to answer my query. NB my chipset is Ralink RT3070
View 1 Replies
View Related
Dec 9, 2010
I recently had my AE 1000 linksys wireless adapter driver installed, the info for which can be found here:
[URL]
But today I was presented with 142 automatic updates already downloaded waiting to be installed on my computer. I installed the updates and restarted my computer for the updates to take effect. Well, since then my wireless adapter no longer registers at all, it doesn't even recognize my router let alone connect to it. It is as inoperable as the day I got it.
I am currently using a different computer in the house to get internet. Should I go about following the same directions I did before and reinstall the driver, or is there a more simple way?
View 4 Replies
View Related
Jul 4, 2011
I installed newest Ubuntu system, 11.04, Natty-Narwhal, and PC is running smoothly. It is solid machine, Celeron 430, 1 gb of DDR2 memory and I have both LAN card and graphics integrated on the mobo which is MSI 7529, based on G31/P35/P31 chipset.
I plugged lan cable directly from my PC to the ADSL router. There is another Win Xp machine on the same router and it has connection, and internet is working fine. Right now Im writing from the Win 7 laptop, which is connected to the same router via wifi link... all working like a charm...
But, when I plug the Ubuntu desk I cannot get access to bot lan and internet...
I searched the net and it seems that ubuntu didnt install proper driver during the OS installation. Here are some diagnostics of the current config and state:
Code:
Module Size Used by
binfmt_misc 13213 1
snd_hda_codec_realtek 255820 1
code....
As you can see I need to install driver named r8101 instead this one r8169 and I think it will work that way. I found driver here only problem is dont know how to replace them.
View 9 Replies
View Related
Mar 12, 2010
I am unable to ssh a Linux box from other Linux boxes; also tried to window putty.Although I am getting the password prompt instantaneously.So far, by comparing logs of other server, I am just able figure out that "debug2: callback start" is not coming in ssh -vvv logs.
View 2 Replies
View Related
Jan 13, 2010
I know how to add linux if windows is pre installed. But do not know how to do it in reverse
View 10 Replies
View Related
Jul 6, 2010
I have written simple modules (device driver)and i tried to compile and i found in /usr/src/ linux directory doesn't exists.
i have included </linux/modules.h> - doesn't exists in the /usr/src/ directory
i am using fedora 12 , 2.6.31.5-127.fc12.i686.PAE,i have install gcc,gcc-c++ compiler
Did i want to to download kernel source code for 2.6.31.5-127.fc12.i686.PAE. or how to add those files.
View 1 Replies
View Related
Nov 25, 2010
Im currently having some DATEL PCI-416 cards, but in need of Linux driver for those cards.
Could any one gimme a link to download the driver or some information about it ?
View 3 Replies
View Related
May 7, 2010
I attempted a distribution upgrade from 8.04LTS (32 bit) to 10.04LTS (32 bit). Once converted, I had no wireless or wired internet, along with numerous other bugs. After relentless hours of trying to resolve the problems, I converted back to 8.04LTS and installed the b43 drivers; I have wireless, however, still no wired connection. I've provided the outputs of the "sudo lshw -C network" terminal command below both before conversion to 10.04 and after reversion back to 8.04LTS. You'll notice that the NIC is not even listed after reversion (this is the same output that 10.04LTS gave me as well).
1.) Does anyone know if the terminal command will identify the NIC if the NIC Driver (assuming it's tg3) is not installed?
2.) Does 8.04LTS and 10.04LTS have a pre-installed NIC driver that is not compatible with the bcm5705?
[Code].....
View 2 Replies
View Related
Dec 22, 2009
How do you create an image of an installed linux system and use it to build other desktops or servers.
View 6 Replies
View Related
Dec 18, 2010
I have to install a linux destribution (Ubuntu 2.6.21) on an embedded PC which contains a FlashCard instead of the HDD.On the bootup, the installation cannot start since it cannot detect the FlashCard on which it will make the installation; therefor, i have to add the driver of this FlashCard to ISO CD
View 2 Replies
View Related
Apr 6, 2011
I did it long time with LFS but I don't remember how. the "root" option of the kernel in grub except only the partition. How do I set the "root" as a directory in a partition?
View 4 Replies
View Related
Aug 20, 2009
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 1 Replies
View Related
Mar 13, 2011
I have installed Oracle Enterprise linux and lost Windows Vista. It is I think still there - I can see it if I use a live Debian CD.
However when I turn on my PC I can not see a grub menu - even though I have created one :-
Code:
View 12 Replies
View Related
Nov 22, 2010
Printer installed in linux Mandriva 2010.0 always disabled.How to resolved.Windows computer connected to printer always need to reconnect.
View 14 Replies
View Related
Jun 22, 2010
i would like to upgrade my Kerio Mail Server to Kerio-Connect in Linux CentOS but it shows the error as following:
# rpm -U kerio-connect-7.0.1-1249-linux.rpm
error: kerio-connect-7.0.1-1249-linux.rpm: rpmReadSignature failed: region trailer: BAD, tag 15872 type 2047 offset 20480 count 4096
error: kerio-connect-7.0.1-1249-linux.rpm cannot be installed
View 1 Replies
View Related
Feb 13, 2010
Installed gfax on Debian Linux i386 squeeze.Also installed: libc-bin libc-dev-bin libpaper-utils.Also upgraded: libc6 libc6-dev libc6-i686 libmono-corlib2.0-cil libmono-security2.0-cil libmono-system2.0-cil locales mono-2.0-gac mono-gac mono-runtime.
It fails to work. As user:
francesco@deb32:~$ gfax
Unhandled Exception: System.UnauthorizedAccessException: Access to the path
[code]....
View 1 Replies
View Related
Nov 27, 2009
I want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies
View Related
