Ubuntu Networking :: Wireless-N Driver Installed But No Internet
Oct 26, 2010
I have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....
View 9 Replies
ADVERTISEMENT
Mar 23, 2011
I downloaded ubuntu 10.10 in my PC alongside with windows 7 yesterday. However it could not detect my wireless LAN then with some hardwork I was able install the wireless device driver but still no internet!
View 1 Replies
View Related
Jan 9, 2011
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies
View Related
May 13, 2010
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies
View Related
Jul 20, 2010
I've read a lot about wireless network cards but I haven't found something similiar to my problem. I've a belkin wireless card F5D7000tt and its driver bcmwl5.inf. I think I've correctly installed it because when I use "ndiswrapper -l" i get:
WARNING: all config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future realease.
bcmlw5.inf: driver installed
device (14E4:4320) present (alternate driver : ssb)
But when I go to Hardware Drivers I see that "Broadcom B43 wireless driver" is not enabled, and when a try to enable it I get an error message:"We are sorry, but the installation of this driver failed. Check the register archive to see more details: /var/log/jockey.log"
View 6 Replies
View Related
Jan 14, 2010
Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
View 4 Replies
View Related
Mar 30, 2011
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
View 9 Replies
View Related
Apr 14, 2010
I have installed a wireless card in my Ubuntu 9.04 System. When I start Firefox, it keep searching for a while and it cannot connect to the internet. I have attached screen shots of network connections. When I type the address of the router in the browser address window, it cannot access the router.
View 2 Replies
View Related
Jun 1, 2010
I am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
View 3 Replies
View Related
Dec 1, 2010
I don't have a wired connection to internet. I have only a wifi connection. Is there any I could download a driver and install or myself in fedora 14??
View 14 Replies
View Related
Jul 31, 2010
I just installed ubuntu on my hp desktop that has wireless built in. I finally found the windows inf and sys driver files, and learned how to get ndiswrapper without internet and installed the driver. It says that i have the hardware it controls, but when I look at the connection icon, it says not connected, has lost the wireless connection block, and I am not connected to the internet. The wireless is called USB Wireless 802.11 b/g , but it is not usb and is plugged straight into the motherboard with the only physical part is the antenna. Why can't I connect?
View 9 Replies
View Related
Feb 15, 2010
I just installed ndiswrapper so I could install my wireless PCI card drivers.I did that and it is recognized and so is the network I want to connect to.But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected".What could be the problem? It's not like I have a bad connection or anything
View 2 Replies
View Related
Aug 13, 2010
I have installed Lubuntu on my dell Latitude C400. Recently I had Unbuntu, but my system was to slow for it. The wireless worked when I installed sl-modem-daemon_2.9.11~20100303-2_i386.deb, however this does not work with Lubuntu. I have used the ndiswrapper to install a driver from windows, and still it is not installed.
After iwconfig i get
lo no wireless extensions
eth1 no wireless extensions
The other problem is this laptop has no cd dive and the ethernet connection does not work, so I can t do updates.
View 4 Replies
View Related
Jan 17, 2011
I am brand new to Linux and Ubuntu. However it was very easy and smooth to install and get updated using my wired ethernet connection. I am now trying to understand how to have my wireless network adapter recognized or driver installed. I will be searching around the forums but it suggested I make an initial post as a new user. I am using an older Dell Inspiron 2200. I believe the chipset in my wireless adapter is indeed Broadcomm, so hopefully that will help direct any responses.
View 2 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
Apr 2, 2010
I'm newb to Debian OS. I have ASUS X51RL laptop. I'm not able to install driver for my wireless internet that's called Atheros Communications Inc. AR242X 802.11abg Wireless PCI Express Adapter.
View 8 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Sep 1, 2010
I am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
View 9 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
Jan 18, 2010
I have a Netgear WNA-1000 that I can't get recognized on any of my Ubuntu boxes (8.10, 9.04, 9.10). This page says that it should work with the ar9170usb driver, and that this driver is already part of the mainline Linux kernel as of 2.6.30. It also noted that ar9170usb does not claim this device's USB-ID at this time.
How do I (a) get this driver to recognize and work with my WNA-1000 under 9.10?
(b) get this driver installed and working under the older versions of Ubuntu that I also have?
View 3 Replies
View Related
Mar 20, 2010
i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies
View Related
Mar 12, 2011
I have a Dell Studio 1558 with a Broadcom wireless adapter. It's a brilliant piece of hardware and love everything about it except some of it's overheating problems. When I first bought it with Windows 7 pre-installed, it had an application installed on it called PeerNet, which creates a wireless network for other computers (and wifi-enabled phones) to connect to it. Simultaneously, you could also share your internet connection with these users. The internet connection could be either wired or wireless.
My question is, how do I go about finding the same functionality on Ubuntu since I know my hardware is capable of it. (I believe in Windows 7, it creates a virtual adapter that it uses) I know there are ways to share a WIRED internet connections with some help with the terminal, but I haven't found a way to share a WIRELESS internet connection. The network manager allows you to create a wireless network but I'm unable to connect to another wireless network at the same time.
The reason I mentioned mobile phones is because my mobile (Android 2.2) is unable to find a wireless network created by the network manager, but another laptop is (without internet access that is). I've noticed that mobile devices and iPod's aren't able to find ad-hoc networks on Windows PCs as well.
I hope someone out there will be able to find a solution for me (and surely others as well!) Maybe the final release of 11.04 will help out later if nothing turns up now.
View 7 Replies
View Related
Mar 14, 2010
I installed the AR81Family-linux-v1.0.1.6.tar.gz driver for my new motherboard, model Gigabyte S-series G31M-ES2L on my ubuntu 8.10 system with the following errors:
wstay@wstay-ubuntu8:~$ ls
Desktop Documents Examples Music Pictures Public Templates Videos
wstay@wstay-ubuntu8:~$ cd Desktop/
wstay@wstay-ubuntu8:~/Desktop$ ls
AR81Family-linux-v1.0.1.6.tar.gz ubuntu8.10-menu.lst
[code]....
The following packages have unmet dependencies:
build-essential: Depends: g++ (>= 4:4.3.1) but it is not going to be installed
Depends: dpkg-dev (>= 1.13.5) but it is not going to be installed
E: Broken packages
wstay@wstay-ubuntu8:~/Desktop/src$
View 1 Replies
View Related
Mar 22, 2010
Even though having already spent many hours trying to connect to the internet from Ubuntu, I still haven't done it succesfully. What I've done so far:
Code:
nuno@Houdini:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
bcmwl5 : driver installed
device (14E4:4318) present (alternate driver: ssb)
On the bar at the top, under 'Wireless Networks' it reads: "disconnected".
View 9 Replies
View Related
Jun 7, 2010
I'm using a Dell with Broadcom bcmwl6.inf driver. I tried the guides using ndiswrapper, but they didn't work for me. What worked was simply going to System -> Administration -> Hardware drivers and activating the Broadcom STA proprietary driver. That sounds great, but every time I restart, I have to remove and install the driver from Hardware Drivers.
What should I do to keep the driver loaded and claimed at the start. This is my lshw -C network before and after removing and installing wireless card driver.
[Code]...
View 3 Replies
View Related
Nov 26, 2010
i found this quote: WPA/WPA2 are broken in every module everybody has tried (AFAIK) since Adam's 1.7.1.1 DKMS driver. Downgrade like so: 1) Get the driver from [URL]... 2) Go to terminal, and move the pre-installed driver so it won't get loaded. cd /lib/modules/2.6.28-11-generic/kernel/drivers/staging/rt2860/ sudo mv rt2860sta.ko rt2860sta.bak. 3) Install rt2860-dkms_1.7.1.1_all.deb. It will also install dependencies needed to compile the driver. If it doesn't retrieve the right packages, make sure "build-essential", "linux-header-generic" and "dkms" is installed. Let it run and it should complete without a problem. 4) Restart. The new driver should work automatically. the deb file gives me an error.
View 9 Replies
View Related
Mar 22, 2011
I have just installed 10.04 on a dell inspiron laptop, but the wireless adapter will not work. I uses a broadcom BCM4312. When I click on the wireless icon, it says "firmware missing". Normally, I would connect to look for proprietary drivers, but my problem is that I live in an apartment complex with only wifi.
So my question is, A) does this sound like a driver problem, and B) if so, how can I get the necessary driver installed (after downloading it with another laptop) when I use lshw, it does show the wireless device, by says that it is disabled. I tried following the directions here [URL]... (changing "ieee80211_crypt_tkip" with "lib80211_crypt_tkip" due to the rename in 2.6.29. I think that is correct), but that did not work either.
View 5 Replies
View Related
Nov 2, 2010
I've just installed Ubuntu 10 as a last resort to save my laptop from the bin. However, I'm having similar issues to when I installed 9.x a few months back. First off, I have no network connection at all (using another laptop just now). I've plugged in the network cable from the modem and although it looks to be doing something, it doesn't establish a connection. The wireless is also not connected due to Firmware not installed. I remeber this was a common issue with the Broadcom 43xx modem but I need to get the wired network going first to be able to download drivers *I think*.
View 1 Replies
View Related
Jan 24, 2010
I used to have a PCi wireless card but decided to upgrade to a 802.11n device. I run the lshw -C network command and no output is shown for the usb dongle. I have installed ndiswrapper and it states the driver is installed, but a popup always appears stating that Ubuntu cannot recognise if the hardware is present, but once this is closed the remaining window shows the dongle is present. So Ubuntu (9.10 btw) can recognise the card is present in the windows driver window, but not in lshw -c network. Any ideas?
There are a number of posts about older Sweex products with different chipsets, but none seem to answer my query. NB my chipset is Ralink RT3070
View 1 Replies
View Related
